AMSRU-7805JZ

AMSRU-78JZ DC-DC Switching Regulator Preliminary Click to ORDER AMSRU-78JZ samples Aimtec introduces the new AMSRU-78JZ, a 0.5A Switching Regulator which is designed to be a plug and play alternative to the traditional 78xx series threeterminal linear regulators. The series features an ultra-wide input voltage range of 9-90V, 1.5mA low no load input current, continuous short-circuit protection, low ripple noise (typ.: 40mV) and much more. The new AMSRU-78JZ series has operating temperature from -40°C to +85°C, delivers efficiencies up to 93%, eliminating the need for a heat sink and cutting additional design space and installation cost. This series is suitable for use in applications such as industrial controls, medical, mining, railway and other related industries. Features • • • • • • Summary Input Range: 9VDC – 90VDC Operating Temp: -40 °C to +85 °C Low ripple & noise, up to 40mV(p-p) typ. Efficiency up to 93% Output short circuit protection Regulated Output AMSRU-78JZ 90 125 24 85 15 85 7.5 3.3 4.5 3 Input voltage (VDC) 1.2 Output voltage (V) 71 1.65 Power (W) -40 -40 Temp. range (℃) Derating (℃) Applications Training Press Release Coming Soon! Product Training Video (click to open) F 052e R4 REV: 02/20/A Application Notes www.Aimtec.com 1 AMSRU-78JZ DC-DC Switching Regulator Preliminary Models & Specifications Single Output Model Input Voltage (VDC) Output Voltage (VDC) Output Current Max (mA) Maximum Capacitive Load (µF) Efficiency (%) Full Load AMSRU-7803JZ AMSRU-7805JZ AMSRU-7806JZ AMSRU-7809JZ AMSRU-7812JZ AMSRU-7815JZ AMSRU-7824JZ 48 (9 ~ 90) 3.3 500 100 82 48 (9 ~ 90) 48 (9 ~ 90) 48 (14 ~ 90) 48 (18 ~ 90) 48 (20 ~ 90) 48 (36 ~ 90) 5 6.5 9 12 15 24 500 500 500 500 500 300 100 100 100 100 100 100 87 91 91 91 93 93 100 100 100 100 82 87 91 91 100 100 91 93 100 93 48 (9 ~ 90) 3.3 500 AMSRU-7803LJZ 48 (9 ~ 90) 5 500 AMSRU-7805LJZ 48 (9 ~ 90) 6.5 500 AMSRU-7806LJZ 48 (14 ~ 90) 9 500 AMSRU-7809LJZ 48 (18 ~ 90) 12 500 AMSRU-7812LJZ 48 (20 ~ 90) 15 500 AMSRU-7815LJZ 48 (36 ~ 90) 24 300 AMSRU-7824LJZ Note: Adding a letter of “L” for L models with right angled leads. Ex: AMSRU-78xxLJZ Input Specification Parameters Voltage range No load input current Filter Reverse polarity at input Conditions Typical Maximum Units 1.5 VDC mA See models table Capacitance filter Avoid / Not protected Output Specification Parameters Voltage accuracy Line regulation Load regulation Short circuit protection Temperature coefficient Ripple & Noise* Transient recovery time Transient response deviation F 052e R4 REV: 02/20/A Conditions Typical Maximum Units 10 ~ 100% input, 3.3V output model 10 ~ 100% input, Others Full load, 3.3V output model Full load, Others 10 ~ 100% load ± 3.5 ± 2.0 ± 0.6 ± 0.6 ± 1.0 ± 4.5 ±3 ± 1.5 ± 1.2 ± 2.0 % % % % % %/ oC mV pk-pk µS % Continuous, Auto recovery 20MHz bandwidth, full load 25% load step change 40 200 ± 0.03 80 1000 25% load step change ± 0.4 ± 1.5 www.Aimtec.com 2 AMSRU-78JZ DC-DC Switching Regulator Preliminary General Specifications Parameters Switching frequency * Operating temperature Storage temperature Pin soldering temperature Cooling Humidity Case material Weight Conditions Typical Full load See derating graph 300 Maximum Units KHz oC oC oC -40 to +85 -55 to +125 Soldering spot is 1.5mm away from case, 10 sec max 300 Free air convection Non-condensing 95 % RH Non-conductive black plastic (UL94V-0 rated) 3.8 g 0.45 x 0.35 x 0.69 inches, 11.50 x 9.00 x 17.50mm Dimensions (L x W x H) L models 0.75 x 0.45 x 0.35 inches, 19.00 x 11.50 x 9.00mm > 2 000 000 hrs (MIL-HDBK -217F, t=+25oC) / Full Load MTBF *Different output voltage with different switching frequency. Safety Specifications Parameters EMC - Conducted and radiated emission Electrostatic Discharge Immunity RF, Electromagnetic Field Immunity Electrical Fast Transient/Burst Immunity Surge Immunity RF, Conducted Disturbance Immunity Standards CISPR32/EN55032, CLASS B with EMI recommended circuit IEC 61000-4-2, Contact ±4KV, Criteria B IEC 61000-4-3, 10V/m, Criteria B IEC 61000-4-4, 100KHz, ±1KV, Criteria B with EMS recommended circuit IEC 61000-4-5, line to line ±1KV, Criteria B with EMS recommended circuit IEC 61000-4-6, 3Vr.m.s, Criteria B Derating For 24V output model(Vin:36~60V) Others model normally Vin For 24V output model(Vin≧60V) Free air Convection Free air Convection 100 Output Power (%) Output Power (%) 100 80 60 Safe Operating Area 40 20 60 Safe Operating Area 40 30 20 0 - 40 80 - 20 0 20 40 60 71 85 80 0 100 - 40 Ambient Temperature º C F 052e R4 REV: 02/20/A - 20 0 20 40 50 60 85 80 100 Ambient Temperature º C www.Aimtec.com 3 AMSRU-78JZ DC-DC Switching Regulator Preliminary Typical Application Circuit +V input +V input Cin 10uF/100V +V output DC-DC Converter Cout GND Load Model Cout 3.3V/5V/6.5V output 9V output 12V/15V output 24V output 22 µF / 10V 22 µF / 16V 22 µF / 25V 10 µF / 50V -V input Note : - For input voltage exceeding 80Vdc, an input capacitor of 22uF/100V is required. - For certain applications, increased values and/or tantalum or low ESR electrolytic capacitors may also be used instead. EMC Recommended Circuit For EMS For EMI +V input +V input LDM 120uH MOV S20K30 C1 680uF/ 100V + C2 4.7uF/100V C3 4.7uF/100V +V output DC-DC Converter GND C4 10uF/50V Load -V input Dimensions Pin Out Specifications Pin Function 1 +V Input 2 GND 3 +V Output F 052e R4 REV: 02/20/A www.Aimtec.com 4 AMSRU-78JZ Preliminary Front View 11.50 (0.45) DC-DC Switching Regulator 2.54 (0.10) 9.00 (0.35) Ø 1.00 (Ø 0.04) 0.50 (0.02) 17.50 (0.69) Side View 2.54 (0.10) 1 2 Dimensions are typical values: mm (inch) General Tolerance: ± 0.50 (± 0.02) Pin Tolerance: ± 0.1 (± 0.004) 0.50 (0.024) 4.10 (0.16) DIV: 2.54 (0.1) 3 0.30 (0.01) 2.54 (0.10) 2.15 (0.09) 3.21 (0.13) Bottom View L Models Footprint 11.50 (0.45) 17.50 (0.69) 1.35 (0.05) Dimensions are typical values: mm (inch) General Tolerance: ± 0.50 (± 0.02) Pin Tolerance: ± 0.1 (± 0.004) 9.00 (0.35) Bottom View 5.08 (0.20) 4.10 (0.16) 0.50 (0.02) 5.08 (0.20) 19.00 (0.75) Side View Φ 1.00 (Φ 0.04) 17.5 (0.69) Pin Out Specifications Pin Function 1 +V Input 2 GND 3 +V Output F 052e R4 REV: 02/20/A www.Aimtec.com 5 AMSRU-78JZ Preliminary DC-DC Switching Regulator NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity