AT5562SGRE

AT5562 Preliminary Product Information 2-channel DC Motor Driver For Toy Features • Independent 2-channel H-bridge drivers built-in power PMOS and NMOS. • All the drivers with forward, reverse, stop and brake function. • Low stand-by and operating current. • Low on-resistance. (1.0 Ω ) • Low voltage operation. • Built-in thermal shutdown function. • Package PDIP-16 & SOP-14 General Description The AT5562 is a 2-channel H-bridge drivers IC for DC motor application. It has the features of low stand-by current, low operating current, large current output and low RDSON. Those features make it suitable for toy. Applications •Toy motor Driver Block Diagram Aimtron reserves the right without notice to change this circuitry and specifications. 7F, No.9, Park Avenue II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C. Tel: 886-3-563-0878 Fax: 886-3-563-0879 WWW: http://www.aimtron.com.tw 06/11/07 REV:0.3 Email: service@aimtron.com.tw 1 AT5562 Preliminary Product Information 2-channel DC Motor Driver For Toy Pin Configuration DIP-16 PGND1 AGND IN1A IN1B OUT1A OUT1B VM1 10 7 16 15 14 13 12 11 AT5562D ▲▲▲▲▲▲ 1 2 3 4 5 6 8 IN2A OUT2B PGND2 OUT2A IN2B VM2 9 6 SOP-14 IN1A IN1B GND OUT1A OUT1B VM1 AGND 14 13 12 11 10 AT5562S ▲▲▲▲▲▲ 1 2 3 4 5 7 IN2A OUT2B GND OUT2A IN2B VM2 Ordering Information Part number AT5562D_PBF AT5562S_GRE Package PDIP-16,PB-Free SOP-14, Green Marking ▲▲▲▲▲▲, Date Code with one bottom line ▲▲▲▲▲▲, Date Code with one bottom line *For more marking information, contact out sales representative directly 7F, No.9, Park Avenue II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C. Tel: 886-3-563-0878 Fax: 886-3-563-0879 WWW: http://www.aimtron.com.tw 06/11/07 REV:0.3 Email: service@aimtron.com.tw 2 VCC D1A 8 VCC D1A 9 AT5562 Preliminary Product Information 2-channel DC Motor Driver For Toy Pin Description DIP-16 Pin NO. Symbol I/O Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 IN2B IN2A OUT2B PGND1 AGND OUT2A VM2 VCC D1A VM1 OUT1A AGND PGND2 OUT1B IN1A IN1B I I O G G O P P I P O G G O I I It combines IN2A to decide the state of the driver2 It combines IN2B to decide the state of the driver2 H-bridge output terminal 2B of the driver2 Power GND GND H-bridge output terminal 2A of the driver2 Power supply for driver2 Power supply Cathode of upper diode in OUT1A. It must be connected to VM1 or higher power supply for turbo function. Power supply for driver1 H-bridge output terminal 1A of the driver1 GND Power GND H-bridge output terminal 1B of the driver1 It combines IN1B to decide the state of the driver1 It combines IN1A to decide the state of the driver1 SOP-14 Pin NO. Symbol I/O Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 IN2B IN2A OUT2B GND OUT2A VM2 VCC D1A VM1 OUT1A GND OUT1B IN1A IN1B I I O G O P P I P O G O I I It combines IN2A to decide the state of the driver2 It combines IN2B to decide the state of the driver2 H-bridge output terminal 2B of the driver2 GND H-bridge output terminal 2A of the driver2 Power supply for driver2 Power supply Cathode of upper diode in OUT1A. It must be connected to VM1 or higher power supply for turbo function. Power supply for driver1 H-bridge output terminal 1A of the driver1 GND H-bridge output terminal 1B of the driver1 It combines IN1B to decide the state of the driver1 It combines IN1A to decide the state of the driver1 7F, No.9, Park Avenue II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C. Tel: 886-3-563-0878 Fax: 886-3-563-0879 WWW: http://www.aimtron.com.tw 06/11/07 REV:0.3 Email: service@aimtron.com.tw 3 AT5562 Preliminary Product Information 2-channel DC Motor Driver For Toy Absolute Maximum Ratings *1 Parameter Supply voltage VCC Supply voltage VM Control input voltage D1A voltage Power dissipation, Pd *2 Thermal Resistance from Junction to Ambient, θJA*2 Operating temperature Junction temperature Storage temperature range Peak output current for 1 CH Maximum continuous output current for 1CH *3 ESD Susceptibility *4 Symbol VCC VM VIN VD1A DIP-16 SOP-14 DIP-16 SOP-14 Topr Tj Tstg Iop Ioc HBM MM Ratings +5.5 +10.5 VCC VM+4.5 2 1.73 65 75 -20 ~ +85 ~ +150 -55 ~ +150 1.5 0.8 2 200 Unit V V V V W 0 C/W ˚C ˚C ˚C A A KV V 1. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. 2. The accuracy of θJA or power dissipation will be based on PC board layout. 3. The maximum continuous output current should be set due to be corresponding with the power dissipation. 4. Device are ESD sensitive. Handling precaution recommended. The Human Body model is a 100pF capacitor discharged through a 1.5KΩ resistor into each pin. Recommended Operating Conditions Parameter Supply voltage VCC Supply voltage VM1,2 Control input voltage D1A voltage H Bridge output current Symbol VCC VM1,2 VIN VD1A Iout Ratings +2.2 ~ +5.0 +1.8 ~ +9 0 ~ VCC VM ~ VM+3 -400 ~ +400 (Ta=25°C) Unit V V V V mA 7F, No.9, Park Avenue II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C. Tel: 886-3-563-0878 Fax: 886-3-563-0879 WWW: http://www.aimtron.com.tw 06/11/07 REV:0.3 Email: service@aimtron.com.tw 4 AT5562 Preliminary Product Information 2-channel DC Motor Driver For Toy Electrical Characteristic Parameter Whole circuits Circuit current at standby VM current at standby Circuit current Symbol (Ta=25 °C , VCC=3.0V, VM1=VM2=3V ,RL1=RL2=15Ω , unless otherwise noted.) Condition Min. Values Typ. Max. Unit ICCST IN1A=IN1B=IN2A=IN2B=L IVMST IN1A=IN1B=IN2A=IN2B=L ICC INxA=H, INxB=L or INxA=L, INxB=H or INxA=H, INxB=H INxA=H, INxB=L or INxA=L, INxB=H or INxA=H, INxB=H No load ---- 0 0 0.3 10 10 1 uA uA mA VM current Control input H level input voltage L level input voltage H level input voltage L level input voltage Pull-down resistance Driver1, 2 Output ON Resistance Diode Leakage current Spark-killing Diode voltage Thermal Protection Circuit Protection Temperature IVM -- 0.1 0.5 mA VINH VINL IINH IINL RIN VIN=3V VIN=0V 2.0 ---1 -- --5 0 1.5 -0.8 20 --- V V uA uA MΩ RON Io=+-200mA, Sum of on-resistance -- 1.00 1.60 Ω IDLEAK VCC=5V, VM1=9V VD IOUT=400mA --- --- 100 1.7 uA V TSD -- 150 -- °C 7F, No.9, Park Avenue II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C. Tel: 886-3-563-0878 Fax: 886-3-563-0879 WWW: http://www.aimtron.com.tw 06/11/07 REV:0.3 Email: service@aimtron.com.tw 5 AT5562 Preliminary Product Information 2-channel DC Motor Driver For Toy Input-output logic table Input IN1A L H L H IN1B L L H H IN2A IN2B OUT1A Hi-Z H L L Output OUT1B OUT2A Hi-Z L H L Hi-Z H L L OUT2B Mode Standby Forward Reverse Brake Standby Forward Reverse Brake L H L H L L H H Hi-Z L H L Input-output waveforms 7F, No.9, Park Avenue II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C. Tel: 886-3-563-0878 Fax: 886-3-563-0879 WWW: http://www.aimtron.com.tw 06/11/07 REV:0.3 Email: service@aimtron.com.tw 6 AT5562 Preliminary Product Information 2-channel DC Motor Driver For Toy Application reference 1-1 FIG. 1: DIP-16 package of AT5562 for typical application. Application reference 1-2 VM 6V 10uF /16V 0.1uF 9 VM1 D1A 8 6 VM2 OUT1A 10 0.1uF VCC 3V 7 VCC OUT1B 10uF /16V 12 DCM1 0.1uF 4 GND AT5562 SOP-14 OUT2A 5 IN1A IN1B 13 14 IN1A 0.1uF IN1B OUT2B 3 DCM2 IN2A IN2B 2 1 IN2A IN2B GND 11 FIG. 2: SOP-14 package of AT5562 for typical application. 7F, No.9, Park Avenue II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C. Tel: 886-3-563-0878 Fax: 886-3-563-0879 WWW: http://www.aimtron.com.tw 06/11/07 REV:0.3 Email: service@aimtron.com.tw 7 AT5562 Preliminary Product Information 2-channel DC Motor Driver For Toy Application reference 2-1 FIG. 3: DIP-16 package of AT5562 for application with a turbo function. NOTED：To see below figure. Because DCM 1 is operated with turbo function, D1A pin (pin 9) must be connected to voltage at VTURBO. The output current is essentially continuous due to inductor -characteristic of motor, so if DCM1 is operated in reverse-forward, the stop mode which will make AT5562 to turn off all switcher should not be the way to stop the DCM1. The brake mode which will make AT5562 turn on Q1 and Q3 is best way to stop motor in reverseforward mode. 7F, No.9, Park Avenue II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C. Tel: 886-3-563-0878 Fax: 886-3-563-0879 WWW: http://www.aimtron.com.tw 06/11/07 REV:0.3 Email: service@aimtron.com.tw 8 AT5562 Preliminary Product Information 2-channel DC Motor Driver For Toy VTURBO VM Q1 D1 Q3 D3 OUT1A OUT1B Q2 D2 Q4 D4 GND Application reference 2-2 FIG. 4: SOP-14 package of AT5562 for application with a turbo function. NOTED：To see below figure. Because DCM 1 is operated with turbo function, D1A pin (pin 9) must be connected to voltage at VTURBO. The output current is essentially continuous due to inductor -characteristic of motor, so if DCM1 is operated in reverse-forward, the stop mode which will make AT5562 to turn off all switcher should not be the way to stop the DCM1. The brake mode which will make AT5562 turn on Q1 and Q3 is best way to stop motor in reverseforward mode. 7F, No.9, Park Avenue II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C. Tel: 886-3-563-0878 Fax: 886-3-563-0879 WWW: http://www.aimtron.com.tw 06/11/07 REV:0.3 Email: service@aimtron.com.tw 9 AT5562 Preliminary Product Information 2-channel DC Motor Driver For Toy VTURBO VM Q1 D1 Q3 D3 OUT1A OUT1B Q2 D2 Q4 D4 GND Package Description : DIP-16 7F, No.9, Park Avenue II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C. Tel: 886-3-563-0878 Fax: 886-3-563-0879 WWW: http://www.aimtron.com.tw 06/11/07 REV:0.3 Email: service@aimtron.com.tw 10 AT5562 Preliminary Product Information 2-channel DC Motor Driver For Toy Package Description : SOP-14 7F, No.9, Park Avenue II, Science-Based Industrial Park, Hsinchu 300,Taiwan, R.O.C. Tel: 886-3-563-0878 Fax: 886-3-563-0879 WWW: http://www.aimtron.com.tw 06/11/07 REV:0.3 Email: service@aimtron.com.tw 11 AT5562 Preliminary Product Information 2-channel DC Motor Driver For Toy Reflow Profiles Profile Feature Average ramp-up rate (TL to TP) Sn-Pb Eutectic Assembly Pb-Free Assembly Small Body Large Body Large Body Small Body Pkg. thickness Pkg. thickness Pkg. thickness Pkg. thickness ≥2.5mm or Pkg.