AK8180E

AK8180E 2.5V, 3.3V LVCMOS 1:18 Clock Fanout Buffer AK8180E Features Description The AK8180E is a member of AKM’s LVCMOS clock fanout buffer family designed for telecom, networking and computer applications, requiring a range of clocks with high performance and low skew. The AK8180E distributes 18 buffered clocks up to 200MHz. The 18 outputs can drive terminated 50  clock lines. AK8180E are derived from AKM’s long-term-experienced clock device technology, and enable clock output to perform low skew and to operate with very low current consumption. The AK8180E is available in a 7mm x 7mm 32-pin LQFP package. 18 LVCMOS outputs enable to drive up to 36 clock lines LVCMOS/LVTTL input 2.5V or 3.3V power supply Clock output frequency up to 200MHz Output-to-output skew: 85ps (typical) Output enable control Operating Temperature Range: -40 to +85℃ Package: 32-pin LQFP (Pb free) Pin compatible with CY29942, MPC942C Block Diagram MS1511-E-00 Jan-2013 -1- AK8180E Pin Descriptions Package: 32-Pin LQFP(Top View) Pin No. Pin Name Pin Type pullup /down Description 1 VSS PWR Ground 2 VSS PWR Ground 3 TCLK IN PD Clock Input (LVCMOS/LVTTL) 4 NC -- PD It should be connected to VSS or opened Clock Output Enable 5 OE IN PU High (open): clock outputs follow clock input Low: clock outputs become high impedance 6 NC -- 7 VDD PWR PD It should be connected to VSS or opened Power Supply 8 VDD PWR Power Supply 9 Q17 OUT Clock Output 10 Q16 OUT Clock Output 11 Q15 OUT Clock Output 12 VSS PWR Ground 13 Q14 OUT Clock Output 14 Q13 OUT Clock Output 15 Q12 OUT Clock Output 16 VDD PWR Power Supply (continue on next page) Jan-2013 MS1511-E-00 -2- AK8180E Pin No. Pin Name Pin Type Pullup /down Description 17 VSS PWR Ground 18 Q11 OUT Clock Output 19 Q10 OUT Clock Output 20 Q9 OUT Clock Output 21 VDD PWR Power Supply 22 Q8 OUT Clock Output 23 Q7 OUT Clock Output 24 Q6 OUT Clock Output 25 VSS PWR Ground 26 Q5 OUT Clock Output 27 Q4 OUT Clock Output 28 Q3 OUT Clock Output 29 VDD PWR Power Supply 30 Q2 OUT Clock Output 31 Q1 OUT Clock Output 32 Q0 OUT Clock Output PWR: Power pin, IN: Input pin, PU: Pull up, PD: Pull down OUT: Output pin Ordering Information Part Number Marking Shipping Packaging Package Temperature Range AK8180E AK8180E Tape and Reel 32-pin LQFP -40 to 85 ℃ MS1511-E-00 Jan-2013 -3- AK8180E Absolute Maximum Rating Over operating free-air temperature range unless otherwise noted Items (1) Symbol Ratings Unit Supply voltage VDD -0.3 to 4.6 V Ground level VSS 0 V Input voltage Vin VSS-0.5 to VDD+0.5 V Input current (any pins except supplies) IIN ±10 mA Tstg -55 to 150 C Storage temperature Note (1) Stress beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only. Functional operation of the device at these or any other conditions beyond those indicated under “Recommended Operating Conditions” is not implied. Exposure to absolute-maximum-rating conditions for extended periods may affect device reliability. Electrical parameters are guaranteed only over the recommended operating temperature range. ESD Sensitive Device This device is manufactured on a CMOS process, therefore, generically susceptible to damage by excessive static voltage. Failure to observe proper handling and installation procedures can cause damage. AKM recommends that this device is handled with appropriate precautions. Recommended Operation Conditions Parameter Operating temperature Supply voltage (1) Symbol Conditions Ta Min Typ Max Unit 85 C 2.375 2.5 2.625 3.135 3.3 3.465 -40 VDD VDD5% (1) Power of 2.5V or 3.3V requires to be supplied from a single source. power supply line should be located close to each VDD pin. V A decoupling capacitor of 0.1F for General Specification Parameter Symbol Conditions Min Typ Max Unit Output Termination Voltage VTT VDD/2 V Input Capacitance CIN 4.0 pF Input Pullup Resistor RPU 51 kΩ Input Pulldown Resistor RPD 51 kΩ Jan-2013 MS1511-E-00 -4- AK8180E DC Characteristics VDD = 3.3V5% or 2.5V5%, Ta: -40 to +85℃, unless otherwise noted Parameter Input High Voltage Input Low Voltage Input Current (1), (2) Symbol Conditions MIN Unit VDD+0.3 V Pin: TCLK, OE 2.0 VIL Pin: TCLK, OE VSS-0.3 0.8 V IIN Pin: TCLK, OE -200 200 μA IOH= -20mA (2), (3) , VDD=3.3V VOH Output Low Voltage VOL IOL= +20mA Quiescent Supply Current IDDQ OE=VSS, TCLK=H/L IOH= -16mA (2), (3) , VDD=2.5V 2.4 2.0 0.1 CL=15pF VDD=3.3V, Outputs at 200MHz IDD V (2), (3) VDD=3.3V, Outputs at 150MHz CL=15pF VDD=2.5V, Outputs at 150MHz CL=15pF VDD=2.5V, Outputs at 200MHz CL=15pF Output Impedance MAX VIH Output High Voltage Dynamic Supply Current TYP ZOUT 7 0.5 V 7 mA 285 mA 335 mA 200 mA 240 mA 22  (1) Inputs have pull-up / pull down resistors that effect input current. (2) Polarity (-): Outgoing current from device. Polarity (+): Incoming current to device. (3) Driving series or parallel terminated 50Ω (or 50Ω to VTT) transmission lines. MS1511-E-00 Jan-2013 -5- AK8180E AC Characteristics VDD = 3.3V5%, Ta: -40 to +85℃, unless otherwise noted Parameter Symbol Input Frequency fIN Propagation Delay tpd Conditions TCLK to any Q (1), (2) Output Duty Cycle DCOUT Measured at VTT Output-to-Output Skew tskpp (1), (2), Part-to-Part Skew (4) tskD1 Part-to-Part Skew (5) tskD2 Output Rise/Fall Time tr , tf (1), (2), (3) MIN TYP 0.8V to 2.0V Unit 200 MHz 0.9 2.5 ns 45 55 % 200 ps 1.6 ns 600 ps 0.6 ns MAX Unit 200 MHz 1.0 3.0 ns 45 55 % 200 ps 2.0 ns 600 ps 1.0 ns 85 (1), (2) MAX 0.08 (1) Outputs driving 50Ω transmission lines. (2) See Figure 1. (3) 50% input duty cycle. (4) Across temperature and voltage ranges, includes output skew. (5) For a specific temperature and voltage, includes output skew. AC Characteristics VDD = 2.5V5%, Ta: -40 to +85℃, unless otherwise noted Parameter Input Frequency Symbol Conditions MIN TYP fIN Propagation Delay Output Duty Cycle Output-to-Output Skew tpd DCOUT Measured at VTT tskpp (1), (2), Part-to-Part Skew (4) tskD1 Part-to-Part Skew (5) tskD2 Output Rise/Fall Time TCLK to any Q (1), (2) tr , tf 0.5V to 1.8V (1), (2), (3) 85 (1), (2) 0.15 (1) Outputs driving 50Ω transmission lines. (2) See Figure 1. (3) 50% input duty cycle. (4) Across temperature and voltage ranges, includes output skew. (5) For a specific temperature and voltage, includes output skew. Jan-2013 MS1511-E-00 -6- AK8180E AK8180E DUT Pulse Generator Z = 50 Zo = 50 Zo = 50 RT = 50 RT = 50 VTT Figure 1. Figure 2. VTT LVCMOS_CLK Test Reference LVCMOS Propagation Delay (tpd) Test Reference Figure 3. Output Duty Cycle (DCOUT) Figure 4. Output-to-Output Skew (tskpp) MS1511-E-00 Jan-2013 -7- AK8180E Function Table The following table shows the inputs/outputs clock state configured through the control pins. Table 1: Control Input Function Table Input Output OE Q0:Q17 L Disabled (high impedance) H Enabled Jan-2013 MS1511-E-00 -8- AK8180E Package Information  Mechanical data : 32-lead LQFP 9.00±0.20 7.00 17 25 16 32 9 7.00 0.80 8 0.37±0.05 0.20 M 0゜～7゜ 1.60MAX 1 1.35～1.45 9.00±0.20 24 0.60±0.10 0.10 S MS1511-E-00 0.05～0.15 0.09～0.20 S Jan-2013 -9- AK8180E  Marking a: b: c: #1 Pin Index Part number Date code (7 digits) (1) AKM is the brand name of AKM’ｓ IC’s. AKM and the logo - - are the brand of AKM’ｓ IC’s and identify that AKM continues to offer the best choice for high performance mixed-signal solution under this brand.  RoHS Compliance All integrated circuits form Asahi Kasei Microdevices Corporation (AKM) assembled in “lead-free” packages* are fully compliant with RoHS. (*) RoHS compliant products from AKM are identified with “Pb free” letter indication on product label posted on the anti-shield bag and boxes. Jan-2013 MS1511-E-00 - 10 - AK8180E IMPORTANT NOTICE  These products and their specifications are subject to change without notice. When you consider any use or application of these products, please make inquiries the sales office of Asahi Kasei Microdevices Corporation (AKM) or authorized distributors as to current status of the products.  Descriptions of external circuits, application circuits, software and other related information contained in this document are provided only to illustrate the operation and application examples of the semiconductor products. You are fully responsible for the incorporation of these external circuits, application circuits, software and other related information in the design of your equipments. AKM assumes no responsibility for any losses incurred by you or third parties arising from the use of these information herein. AKM assumes no liability for infringement of any patent, intellectual property, or other rights in the application or use of such information contained herein.  Any export of these products, or devices or systems containing them, may require an export license or other official approval under the law and regulations of the country of export pertaining to customs and tariffs, currency exchange, or strategic materials.  AKM products are neither intended nor authorized for use as critical componentsNote1) in any safety, life support, or other hazard related device or systemNote2), and AKM assumes no responsibility for such use, except for the use approved with the express written consent by Representative Director of AKM. As used here: Note1) A critical component is one whose failure to function or perform may reasonably be expected to result, whether directly or indirectly, in the loss of the safety or effectiveness of the device or system containing it, and which must therefore meet very high standards of performance and reliability. Note2) A hazard related device or system is one designed or intended for life support or maintenance of safety or for applications in medicine, aerospace, nuclear energy, or other fields, in which its failure to function or perform may reasonably be expected to result in loss of life or in significant injury or damage to person or property.  It is the responsibility of the buyer or distributor of AKM products, who distributes, disposes of, or otherwise places the product with a third party, to notify such third party in advance of the above content and conditions, and the buyer or distributor agrees to assume any and all responsibility and liability for and hold AKM harmless from any and all claims arising from the use of said product in the absence of such notification. MS1511-E-00 Jan-2013 - 11 -