HG0115

GaAs Hall Element HG-0115 Shipped in packet-tape reel(5,000pcs per reel) Notice : It is requested to read and accept "IMPORTANT NOTICE" written on the back of the front cover of this catalogue. ●Absolute Maximum Ratings Item Symbol Limit Unit Max. Input Voltage VC 8 V Max.Input Power PD 150 mW −40 ∼ ＋125 ℃ −40 ∼ ＋150 ℃ Operating Temp. Range Topr. Storage Temp. Range Tstg. ●Dimensional Drawing(Unit : mm) ●Electrical Characteristics(Ta=25℃) Typ. Max. Unit Output Hall Voltage VH B=50mT, Vc=6V Input Resistance Rin B=0mT,Ⅰc=0.1mA 2,200 2,400 3,200 Ω Output Resistance Rout B=0mT,Ⅰc=0.1mA 4,400 4,800 6,400 Ω 110 80 mV 0.3 Min. 0.3 Sensor Center 2 3 φ0.2 1.05 ※ Conditions 1.6±0.1 Symbol 5 Item ＋0 0.5−0.1 0.8±0.1 CL 5 N 4 1 B=50mT,Ⅰc=1mA Ta=25∼125℃ ※ ※ Linearity ΔK −0.08 %/℃ 0.3 %/℃ 2 % B=0.1/0.5T,Ⅰc=1mA 3. 4. 0.15 Pin 5 is short to pin 3 inside the package. Pinning CL Notes : 1. VH = VHM – Vos(Vu) (VHM:meter indication) 2. Sensor Center 0.3 B=0mT,Ⅰc=0.1mA Temp. Coefficient of Rin αRin Ta=25∼125℃ mV ＋0 0.5−0.1 ※ αVH 8 1 2) – VH (T1) X 100 VH = VH (T1) X VH (T (T2 – T1) 1 Rin (T2) – Rin (T1) X 100 Rin = Rin (T1) X (T2 – T1) 1) – K (B2) K = [K K(B(B X 100 1) + K (B2)] / 2 Input 1（±） 3（ ） Output 2（±） 4（ ） ± Temp. Coefficient of VH −8 ± Vos(Vu) B=0mT, Vc=6V Offset Voltage T1 = 25˚C, T2 = 125˚C K= VH IC • B ●Land pattern (for reference only)(Unit : mm) B1 = 0.5T, B2 = 0.1T ●Characteristic Curves  Allowable Package Power Dissipation   160 0.35 Max. Input Power：PD [mW] 0.70 1.05 200 120 0.30 0.55 80 40 0 0 20 40 60 80 100 Ambient Temperature:Ta [℃] 48 120 140 0.30 HG-0115 •Please be aware that our products are not intended for use in life support equipment, devices, or systems. Use of our products in such applications requires the advance written approval of our sales staff. Certain applications using semiconductor devices may involve potential risks of personal injury, property damage, or loss of life. In order to minimize these risks, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. Inclusion of our products in such applications is understood to be fully at the risk of the customer using our devices or systems. •Handling precautions required for preventing electrostatic discharge. •This product contains galium arsenide（GaAs）.Handling and discarding precautions required. ●Characteristic Curves Rin-T 800 Input Resistance:Rin [Ω] Output Hall Voltage:VH [mV] 3000 2500 2000 1500 1000 500 0 -50 b VH-B 3500 700 Ic const 600 Vc const 500 0 50 100 0 150 0 100 200 Magnetic Flux Density:B [mT] 300 VH-Vc,VH-Ic 120 160 Ic const 100 Output Hall Voltage:VH［mV］ Output Hall Voltage:VH［mV］ Ic 200 100 VH-T Vc const Vc 80 60 Ic 40 lc =1 [mA] Vc = 6 [V] B =50 [mT] 20 140 Ic const Ic Vc const 120 100 Vc 80 60 B =50 [mT] Ta =25 [℃] 40 0 0 50 100 0 150 2 Ic const Ic const 6 Offset Voltage:Vos [mV] Vc const 5 Vc 2 8  10 10 7 3 6 Vos(Vu)-Vc, Vos(Vu)-Ic（For reference only） 8 4 4 Input Current:Ic［mA］ Input Voltage:Vc［V］ Vos(Vu)-T（For reference only） lc =1 [mA] Vc = 6 [V] B = 0 [mT] Ic 8 6 Ic 4 Vc 2 k 0 0 50 Ambient Temperature:Ta [℃] 100 150 ※Magnetic Flux Density 1[mT]=10[G] i B =0 [mT] Ta =25 [℃] Vc const 1 0 -50 g 20 Ambient Temperature.Ta［℃］ Offset Voltage:Vos [mV] c Vc 300 Ambient Temperature:Ta [℃] 0 -50 lc =1 [mA] Vc = 6 [V] 400 0 2 4 6 Input Current:Ic [mA] Input Voltage:Vc [V] 8  10 In This Example : Rin=2659〔Ω〕, Vos=3.44〔mV〕, [Vc=6〔V〕] 49 IMPORTANT NOTICE  These products and their specifications are subject to change without notice. When you consider any use or application of these products, please make inquiries the sales office of Asahi Kasei Microdevices Corporation (AKM) or authorized distributors as to current status of the products.  Descriptions of external circuits, application circuits, software and other related information contained in this document are provided only to illustrate the operation and application examples of the semiconductor products. You are fully responsible for the incorporation of these external circuits, application circuits, software and other related information in the design of your equipments. AKM assumes no responsibility for any losses incurred by you or third parties arising from the use of these information herein. AKM assumes no liability for infringement of any patent, intellectual property, or other rights in the application or use of such information contained herein.  Any export of these products, or devices or systems containing them, may require an export license or other official approval under the law and regulations of the country of export pertaining to customs and tariffs, currency exchange, or strategic materials.  AKM products are neither intended nor authorized for use as critical componentsNote1) in any safety, life support, or other hazard related device or systemNote2), and AKM assumes no responsibility for such use, except for the use approved with the express written consent by Representative Director of AKM. As used here: Note1) A critical component is one whose failure to function or perform may reasonably be expected to result, whether directly or indirectly, in the loss of the safety or effectiveness of the device or system containing it, and which must therefore meet very high standards of performance and reliability. Note2) A hazard related device or system is one designed or intended for life support or maintenance of safety or for applications in medicine, aerospace, nuclear energy, or other fields, in which its failure to function or perform may reasonably be expected to result in loss of life or in significant injury or damage to person or property.  It is the responsibility of the buyer or distributor of AKM products, who distributes, disposes of, or otherwise places the product with a third party, to notify such third party in advance of the above content and conditions, and the buyer or distributor agrees to assume any and all responsibility and liability for and hold AKM harmless from any and all claims arising from the use of said product in the absence of such notification. June 2, 2010