ULQ2803A

2803 THRU 2824 HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS 1 2 3 4 5 6 7 8 9 18 17 16 15 14 13 12 11 10 Featuring continuous load current ratings to 500 mA for each of the drivers, the Series ULN28xxA/LW and ULQ28xxA/LW highvoltage, high-current Darlington arrays are ideally suited for interfacing between low-level logic circuitry and multiple peripheral power loads. Typical power loads totaling over 260 W (350 mA x 8, 95 V) can be controlled at an appropriate duty cycle depending on ambient temperature and number of drivers turned on simultaneously. Typical loads include relays, solenoids, stepping motors, magnetic print hammers, multiplexed LED and incandescent displays, and heaters. All devices feature open-collector outputs with integral clamp diodes. The ULx2803A, ULx2803LW, ULx2823A, and ULN2823LW have series input resistors selected for operation directly with 5 V TTL or CMOS. These devices will handle numerous interface needs — particularly those beyond the capabilities of standard logic buffers. The ULx2804A, ULx2804LW, ULx2824A, and ULN2824LW have series input resistors for operation directly from 6 V to 15 V CMOS or PMOS logic outputs. The ULx2803A/LW and ULx2804A/LW are the standard Darlington arrays. The outputs are capable of sinking 500 mA and will withstand at least 50 V in the off state. Outputs may be paralleled for higher load current capability. The ULx2823A/LW and ULx2824A/ LW will withstand 95 V in the off state. These Darlington arrays are furnished in 18-pin dual in-line plastic packages (suffix ‘A’) or 18-lead small-outline plastic packages (suffix ‘LW’). All devices are pinned with outputs opposite inputs to facilitate ease of circuit board layout. Prefix ‘ULN’ devices are rated for operation over the temperature range of -20°C to +85°C; prefix ‘ULQ’ devices are rated for operation to -40°C. Data Sheet 29304.3E Dwg. No. A-10,322A Note that the ULx28xxA series (dual in-line package) and ULx28xxLW series (smalloutline IC package) are electrically identical and share a common terminal number assignment. ABSOLUTE MAXIMUM RATINGS Output Voltage, VCE (x2803x and x2804x) ..................... 50 V (x2823x and x2824x) ..................... 95 V Input Voltage, VIN .............................. 30 V Continuous Output Current, IC .... 500 mA Continuous Input Current, IIN ....... 25 mA Power Dissipation, PD (one Darlington pair) .................. 1.0 W (total package) ..................... See Graph Operating Temperature Range, TA Prefix ‘ULN’ .............. -20°C to + 85°C Prefix ‘ULQ’ ............... -40°C to +85°C Storage Temperature Range, TS ................................ -55°C to +150°C FEATURES I TTL, DTL, PMOS, or CMOS Compatible Inputs I Output Current to 500 mA I Output Voltage to 95 V I Transient-Protected Outputs I Dual In-Line Package or Wide-Body Small-Outline Package x = Character to identify specific device. Characteristic shown applies to family of devices with remaining digits as shown. See matrix on next page. 2803 THRU 2824 HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS DEVICE PART NUMBER DESIGNATION VCE(MAX) IC(MAX) Logic 5V TTL, CMOS 6-15 V CMOS, PMOS 50 V 500 mA Part Number ULN2803A* ULN2803LW* ULN2804A* ULN2804LW* ULN2823A* ULN2823LW ULN2824A* ULN2824LW 95 V 500 mA *Also available for operation between -40°C and +85°C. To order, change prefix from ‘ULN’ to ‘ULQ’. PARTIAL SCHEMATICS ULx28x3A/LW (Each Driver) COM 2.7K ALLOWABLE PACKAGE POWER DISSIPATION IN WATTS 2.5 2.0 7.2K 3K SUFFIX 'A', R θJA = 60°C/W 1.5 Dwg. No. A-9651 1.0 SUFFIX 'LW', R ULx28x4A/LW (Each Driver) COM 10.5K 0.5 θJA = 80°C/W 0 25 50 75 100 125 AMBIENT TEMPERATURE IN °C 150 7.2K 3K Dwg. GP-018B Dwg. No. A-9898A x = Character to identify specific device. Specification shown applies to family of devices with remaining digits as shown. See matrix above. 115 Northeast Cutoff, Box 15036 W Worcester, Massachusetts 01615-0036 (508) 853-5000 Copyright © 1977, 1999 Allegro MicroSystems, Inc. 2803 THRU 2824 HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS Types ULx2803A, ULx2803LW, ULx2804A, and ULx2804LW ELECTRICAL CHARACTERISTICS at +25°C (unless otherwise noted). Characteristic Output Leakage Current Symbol ICEX Test Fig. 1A Applicable Devices All Test Conditions VCE = 50 V, TA = 25°C VCE = 50 V, TA = 70°C 1B Collector-Emitter Saturation Voltage VCE(SAT) 2 ULx2804x All VCE = 50 V, TA = 70°C, VIN = 1.0 V IC = 100 mA, IB = 250 µA lC = 200 mA, IB = 350 µA IC = 350 mA, IB = 500 µA Input Current IIN(ON) 3 ULx2803x ULx2804x VIN = 3.85 V VIN = 5.0 V VIN = 12 V IIN(OFF) Input Voltage VIN(ON) 4 5 All ULx2803x lC = 500 µA, TA = 70°C VCE = 2.0 V, lC = 200 mA VCE = 2.0 V, IC = 250 mA VCE = 2.0 V, lC = 300 mA ULx2804x VCE = 2.0 V, lC = 125 mA VCE = 2.0 V, lC = 200 mA VCE = 2.0 V, IC = 275 mA VCE = 2.0 V, lC = 350 mA Input Capacitance Turn-On Delay Turn-Off Delay Clamp Diode Leakage Current Clamp Diode Forward Voltage CIN tPLH tPHL IR VF — 8 8 6 All All All All 0.5 EIN to 0.5 EOUT 0.5 EIN to 0.5 EOUT VR = 50 V, TA = 25°C VR = 50 V, TA = 70°C 7 All IF = 350 mA Min. — — — — — — — — — 50 — — — — — — — — — — — — — Limits Typ. Max.