194E-CA20

IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Features • • • • • • • • • • • • At-Motor Disconnect Switch 25, 32, 40, 63, 80, 100 A Inductive Load-Rated Switches IP65/Type 1/3/3R/12 Operating Handles IP2LX Finger-Safe Terminals 3- and 6-Pole Versions; Add-on Accessory Poles to Make 4-, 5-, 7- and 8-Pole Units Front/Door or DIN/Base Mounting Configurations Change over Switches OFF-ON Configurations 3- and 6-Pole Enclosed Switches Optional Thermoplastic Enclosures Positive-Guided Actuation Suitable as Motor Disconnect Description Bulletin 194E load switches are designed for use as local motor isolation and IEC disconnect switch applications outside North America. Available with 3- and 6-pole versions with add-on additional poles, grounding and neutral terminals and auxiliary contacts, Bulletin 194Es share the same operating handles as the Bulletin 194L Control and Load Switches. Bulletin 194E switches are offered in two mounting styles, Front/ Door and Base/DIN configurations for a variety of installations. Switch body styles for Bulletin 194E base-mounted switches include standard interlock shaft; Bulletin 194E front-mounted switches include standard shaft. Two-position OFF-ON switch is used to connect or disconnect a variety of inductive loads, including solenoids, actuators, valves, magnetic starters, relays, and motors. Actuators featuring marked legend plates are available in SelectorKnob, Disk-Style, Rectangular-Style and Key-Operated versions. Selector-Knob versions are available in three sizes. Most actuators are available in colours of Gray/Black or Red/Yellow and have padlockable versions. Conformity to Standards • IEC 207 • IEC 947-1 • IEC 947-3 low-voltage switch gear and control gear part 3: switches, disconnecters, switch-disconnecters and fusecombination units. CE marked for all applicable directives. • UL 508: Industrial Control Equipment. cUL, 1999 edition • CSA: C22.2 No. 14: Industrial Control Equipment Approvals • UL listed (file number E54612 NLRV) • CSA certified (LR 13002) • Meets IEC, VDE and BS standard requirements • IEC/CE marked for all applicable directives (per EN 60947-3) • R.I.Na.—Italian Naval Registry Your order must include: • Catalogue Number of switch body • Catalogue Number of actuator • If required, Catalogue Number of accessories 10-2 IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Product Selection OFF-ON Base-Mounted 3-Pole Switch (includes operating shaft) (Actuators listed on pages 10-4 and 10-5) Contact Target Configuration X = Contact Closed O = Contact Open Handle Position ON/1 OFF/0 No. of Circuits Switch Body (Includes Shaft) Function Switching Angle Maximum Load Rating (A) 25 AC23A Rated Power [kW] at 690V AC 50 Hz 11 15 18.5 22 37 45 HP @ 480V AC 60 Hz 3 ∅ 10 15 20 25 50 50 Catalogue Number 194E-A25-1753 194E-A32-1753 194E-A40-1753 194E-A63-1753 194E-A80-1753 194E-A100-1753 ON 1 32 1 2 3 O O O X X X 40 63 80 100 OFF 0 90 O OFF-ON Front-Mounted 3-Pole Switch (includes operating shaft) (Actuators listed on pages 10-4 and 10-5) 25 ON 1 11 15 18.5 22 37 45 10 15 20 25 50 50 194E-E25-1753 194E-E32-1753 194E-E40-1753 194E-E63-1753 194E-E80-1753 194E-E100-1753 32 1 2 3 O O O X X X 40 63 80 100 OFF 0 90 O OFF-ON Base-Mounted 6-Pole Switch (includes operating shaft) (Actuators listed on pages 10-4 and 10-5) 25 ON 1 11 15 18.5 22 37 45 10 15 20 25 50 50 194E-A25-1756 194E-A32-1756 194E-A40-1756 194E-A63-1756 194E-A80-1756 194E-A100-1756 OFF 0 90 O 1 2 3 4 5 6 O O O O O O X X X X X X 32 40 63 80 100 OFF-ON Front-Mounted 6-Pole Switch (includes operating shaft) (Actuators listed on pages 10-4 and 10-5) 25 ON 1 11 15 18.5 22 37 45 10 15 20 25 50 50 194E-E25-1756 194E-E32-1756 194E-E40-1756 194E-E63-1756 194E-E80-1756 194E-E100-1756 OFF 0 90 O 1 2 3 4 5 6 O O O O O O X X X X X X 32 40 63 80 100 10-3 IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Product Selection OFF-ON Base/Front-Mounted 3- and 6-Pole Switches (continued) (Switch Body listed on page 10-3) Actuators with Screw Fixing (Includes Legend Plate and Control Knob) Use with Catalogue Number 194E-25…63A 194E-25…100A 194E-40…100A 194E-25…63A 194E-25…100A 194E-40…100A Legend Marking 0-1 OFF-ON 0-1 OFF-ON 0-1 OFF-ON 0-1 OFF-ON 0-1 OFF-ON 0-1 OFF-ON 0-1 194E-25…63A OFF-ON 0-1 194E-25…100A OFF-ON 0-1 194E-25…63A OFF-ON 0-1 194E-25…100A OFF-ON 0-1 OFF-ON 194L-HE6L-175I 194L-HE4L-175I 194L-HE6L-175 194L-HE6E-175I 194L-HE4L-175 194L-HE4E-175I 194L-HE6E-175 Rating Colour Legend Plate Size 48 mm x 48 mm (1-57/64in x 1-57/64in) Catalogue Number 194L-HE4A-175 194L-HE4A-175I 194L-HE6A-175 194L-HE6A-175I 194L-HE8A-175 194L-HE8A-175I 194L-HE4I-175 194L-HE4I-175I 194L-HE6I-175 194L-HE6I-175I 194L-HE8I-175 194L-HE8I-175I 194L-HE4E-175 IP65 Type A Black/Gray 64 mm x 64 mm (2-33/64in x 2-33/64in) 88 mm x 88 mm (3-15/32in x 3-15/32in) 48 mm x 48 mm (1-57/64in x 1-57/64in) IP65 Red/Yellow 64 mm x 64 mm (2-33/64in x 2-33/64in) 88 mm x 88 mm (3-15/32in x 3-15/32in) 48 mm x 48 mm (1-57/64in x 1-57/64in) Type I IP65 Type E with Locking for One Padlock (Padlock Not Included) Black/Gray 64 mm x 64 mm (2-33/64in x 2-33/64in) 48 mm x 48 mm (1-57/64in x 1-57/64in) IP65 Type L with Locking for One Padlock (Padlock Not Included) Red/Yellow 64 mm x 64 mm (2-33/64in x 2-33/64in) 67 mm x 67 mm (2-41/64in x 2-41/64in) IP65 Type 3/3R/12 Type G Black/Gray 88 mm x 88 mm (3-15/32in x 3-15/32in) 194E-25…100A 194L-HE6G-175 194E-40…100A 0-1 OFF-ON 194L-HE8G-175 67 mm x 67 mm (2-41/64in x 2-41/64in) IP65 Type 3/3R/12 Type N Red/Yellow 90 mm x 90 mm (3-35/64in x 3-35/64in) 194E-25…100A 0-1 OFF-ON 194L-HE6N-175 194E-40…100A 0-1 OFF-ON 0-1 194L-HE8N-175 194L-HE4S-175 194L-HE4S-175I 194L-HE6S-175 194L-HE6S-175I 48 mm x 62 mm (1-57/64in x 2-7/16in) IP65 Type S Black/Gray 64 mm x 78 mm (2-33/64in x 3-5/64in) 194E-25…63A OFF-ON 0-1 194E-25…100A OFF-ON Accessories — Page 10-11 Specifications — Page 10-17 Approximate Dimensions — Page 10-19 10-4 IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Product Selection OFF-ON Front-Mounted 3- and 6-Pole Switches (continued) (Switch Body listed on page 10-3) Actuators with Central Fixing (Includes Legend Plate & Control Knob)➊ Use with Catalogue Number Legend Marking 0-1 IP65 Type A Black/Gray 48 mm x 48 mm (1-57/64in x 1-57/64in) 194E-E25…63A OFF-ON 194L-HC4A-175I Rating Colour Legend Plate Size Catalogue Number 194L-HC4A-175 0-1 IP65 Red/Yellow 48 mm x 48 mm (1-57/64in x 1-57/64in) 194E-E25…63A OFF-ON Type I 194L-HC4I-175 194L-HC4I-175I 0-1 IP65 Type E with Locking (Padlock not Included) Black/Gray 48 mm x 48 mm (1-57/64in x 1-57/64in) 194E-E25…63A OFF-ON 194L-HC4E-175 194L-HC4E-175I 0-1 IP65 Type L with Locking (Padlock not Included) ➊ Use central-mounted handles with Catalogue Number 194E…switches. 194L-HC4L-175 Red/Yellow 48 mm x 48 mm (1-57/64in x 1-57/64in) 194E-E25…63A OFF-ON 194L-HC4L-175I Accessories — Page 10-11 Specifications — Page 10-17 Approximate Dimensions — Page 10-19 10-5 IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Product Selection OFF-ON Front-Mounted 3- and 6-Pole Switches (continued) (Switch Body listed on page 10-3) 194L/194E Disk Actuators with Central Fixing (Type G, N) — Size 6 Use with Catalogue Number Legend Marking 0-1 OFF-ON 67 mm x 67 mm (2-33/64in x 2-33/64in) Red/ Yellow Type G, N 194L/194E Central Fixing Actuators (Type B, D) Description Pkg. Qty. Catalogue Number 194L-E25…100 0-1 OFF-ON 194L-HC6N-175 Rating Colour Black/ Gray Legend Plate Size Catalogue Number 194L-HC6G-175 IP65 Type 3/3R/12 Central-Mounting Actuators (IP65) Handle Style: Knob Lever with Latch (Use with Catalogue Number 194E-E25-100-1753) 1 194L-HCB-001 Type B Key Removal Position (Includes Latch) — Central Fixing Use with Catalogue Number 194L-E25-100-1753 Key Removal Position (Includes Latch) — Central Fixing Use with Catalogue Number 194L-E25-100-1753 Key Removal Position (Includes Latch) — Central Fixing Use with Catalogue Number 194L-E25-100-1753 Type D Key Removal Position (Includes Latch) — Central Fixing Use with Catalogue Number 194L-E25-100-1753 1 194L-HCDG-001 194L-HCDH-001 194L-HCDC-001 194L-HCDD-001 3-Position Front-Mounted Change over Switch (Includes Shaft) Contact Target Configuration X=Contact Closed O=Contact Open Handle Position Function 1 0 2 Switch Body Switching No. of (Includes Shaft) Angle Circuits 1 2 0 Maximum Load Rating (A) 25 32 40 63 80 100 AC23A Rated Power [kW] at 690V AC 50 Hz. 11 15 18.5 22 37 45 HP @ 480V AC 60 Hz, 3∅ 10 15 20 25 50 50 Catalogue Number 194E-A25-3753 194E-A32-3753 194E-A40-3753 194E-A63-3753 194E-A80-3753 194E-A100-3753 X X X O O O O O O O O O O O O X X X 3 2 1 90 O 4 5 6 Accessories — Page 10-11 Specifications — Page 10-17 Approximate Dimensions — Page 10-19 10-6 IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Product Selection OFF-ON Front-Mounted 3- and 6-Pole Switches (continued) (Switch Body listed on page 10-3) 3-Position Change over Switch, Door Mount (includes operating shaft Contact Target Configuration X=Contact Closed O=Contact Open Handle Position Function No. of 1 0 2 Switch Body Switching Cir(Includes Shaft) Angle cuits ) Maximum Load Rating (A) 25 32 40 63 80 100 AC23A Rated Power [kW] at 690V AC 50 Hz. 11 15 18.5 22 37 45 HP @ 480V AC 60 Hz, 3∅ 10 15 20 25 50 50 Catalogue Number 194E-E25-3753 194E-E32-3753 194E-E40-3753 194E-E63-3753 194E-E80-3753 194E-E100-3753 1 2 0 X X X O O O O O O O O O O O O X X X 3 1 90 O 2 4 5 6 Actuators for Change over Switches Actuators with Screw Fixing (Includes Legend Plate & Control Knob) Rating Colour Legend Plate Size 48 mm x 48 mm (1-57/64in x 1-57/64in) Use with Catalogue Number 194E-25…63-3753 Legend Marking I-O-2 Catalogue Number 194L-HE4A-375 IP65 Black/Gray 64 mm x 64 mm (2-33/64in x 2-33/64in) 194E-25…100-3753 I-O-2 194L-HE6A-375 Base-Mounting Distribution Switches Contact Target Function No. of Switching CirAngle cuits OFF/0 1 ON 1 ON/ 1 X X X Colour Red/ Yellow Black/Gray Red/ Yellow Black/Gray Marking O-1 O-1 O-1 O-1 Lockable (one padlock) No Imax [A] AC23A Rated Power [kW] at 690V AC HP @ 480V AC 60 Hz, 3∅ Catalogue Number 194E-A25-1753-R O O O 25 2 3 Yes No 32 Yes 11 10 194E-A25-1753-Q 194E-A32-1753-R OFF 0 90 O 15 15 194E-A32-1753-Q 10-7 IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Product Selection Enclosed Switch with Catalogue Number 194L-HE6N-175 Operating Handle and Thermoplastic Enclosure No. of Poles Function Switching Angle Maximum Load Rating (A) 25 32 40 63 80 100 25 32 40 63 Colour Catalogue Number 194E-Y25-1753-6N 194E-Y32-1753-6N 194E-Y40-1753-6N 194E-Y63-1753-6N 194E-Y80-1753-6N 194E-Y100-1753-6N 194E-Y25-1756-6N 194E-Y32-1756-6N 194E-Y40-1756-6N 194E-Y63-1756-6N 3 ON 1 Red/Yellow OFF 0 90 O Uses BaseMounted Switches 6 Red/Yellow OFF-ON Base-Mounted 3-Pole Switch with Catalogue Number 194L-HE6N-175 Red/Yellow Actuator Kits Function Switching Angle Maximum Load Rating (A) 25 32 ON 1 AC23A Rated Power [kW] at 690V AC 7.5 11 15 18.5 30 HP @ 480V AC 60 Hz, 3 ∅ 10 15 20 25 50 Catalogue Number 194E-A25-1753-6N 194E-A32-1753-6N 194E-A40-1753-6N 194E-A63-1753-6N 194E-A80-1753-6N 40 63 OFF 0 90 O 80 100 Type N 37 50 194E-A100-1753-6N OFF-ON Front-Mounted 3-Pole Switch with Catalogue Number 194L-HE6N-175 Red/Yellow Actuator Kits Function Switching Angle Maximum Load Rating (A) 25 32 ON 1 AC23A Rated Power [kW] at 690V AC 7.5 11 15 18.5 30 37 HP @ 480V AC 60 Hz, 3 ∅ 10 15 20 25 50 50 Catalogue Number 194E-E25-1753-6N 194E-E32-1753-6N 194E-E40-1753-6N 194E-E63-1753-6N 194E-E80-1753-6N 194E-E100-1753-6N 40 63 80 OFF 0 90 O Type N 100 Accessories — Page 10-11 Specifications — Page 10-17 Approximate Dimensions — Page 10-19 10-8 IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Product Selection (continued) Enclosed Disconnect Load Switches — 3-Pole Base-Mounted Stainless Steel Enclosures IP66/Type 4/4X Maximum Load Rating (A) 25 32 40 63 80 100 Painted Steel Enclosures IP66/Type 3/4/12 — 3-Pole Base-Mounted Maximum Load Rating (A) 25 32 40 63 80 100 Ref. Dim. Page A1 A1 A1 A1 B1 B1 Handle Colour Black Red/Yellow Black Red/Yellow Black Red/Yellow Black Red/Yellow Black Red/Yellow Black Red/Yellow Handle Colour Black Red/Yellow Black Red/Yellow Black Red/Yellow Black Red/Yellow Black Red/Yellow Black Red/Yellow Handle Colour Black Red/Yellow Black Red/Yellow Black Red/Yellow Black Red/Yellow Black Red/Yellow Black Red/Yellow Catalogue Number ➊ 194E-CA20 194E-CA20E 194E-CA32 194E-CA32E 194E-CA40 194E-CA40E 194E-CA63 194E-CA63E 194E-CA80 194E-CA80E 194E-CA00 194E-CA00E Catalogue Number ➊ 194E-FA20 194E-FA20E 194E-FA32 194E-FA32E 194E-FA40 194E-FA40E 194E-FA63 194E-FA63E 194E-FA80 194E-FA80E 194E-FA00 194E-FA00E Catalogue Number ➊ 194E-KA20 194E-KA20E 194E-KA32 194E-KA32E 194E-KA40 194E-KA40E 194E-KA63 194E-KA63E 194E-KA80 194E-KA80E 194E-KA00 194E-KA00E Ref. Dim. Page A1 A1 A1 A1 B1 B1 Non-Metallic Enclosures IP66/Type 3/4/4X — 3-Pole Base-Mounted Maximum Load Rating (A) Ref. Dim. Page 25 32 40 63 80 100 C1 C1 C1 C1 D1 D1 ➊ Modifications: Up to two suffix codes may be added to an enclosed disconnect load switch. Example: Catalogue Number 194E-CA20-NP is a disconnect load switch with a power pole in a stainless steel enclosure (see page 10-14). Accessories — Page 10-11 Specifications — Page 10-17 Approximate Dimensions — Page 10-19 10-9 IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Product Selection Enclosed Disconnect Load Switches — 3-Pole Base-Mounted (continued) Metallic Enclosures IP54/Type 1 — 3-Pole Maximum Load Rating (A) 25 32 40 63 80 100 ABS Thermoplastic Enclosure — IP65, For High-Impact Applications Ref. Dim. Page A1 A1 A1 A1 B1 B1 Handle Colour Black Red/Yellow Black Red/Yellow Black Red/Yellow Black Red/Yellow Black Red/Yellow Black Red/Yellow Use with Catalogue Number 194E-25/32 194E-40/63 194E-80/100 194E-25/32 194E-40/63 Switch Usage for Catalogue Number 194E-25/32 194E-40/63 194E-80/100 194E-25/32 194E-40/63 Catalogue Number ➊ 194E-AA20 194E-AA20E 194E-AA32 194E-AA32E 194E-AA40 194E-AA40E 194E-AA63 194E-AA63E 194E-AA80 194E-AA80E 194E-AA00 194E-AA00E Catalogue Number 194L-G3572 194L-G3663 194E-G3665 194E-G3663 194E-G3665 No. of Poles 3…4 3…4 3…4 6 6 Noryl Thermoplastic Enclosures — IP65, For Corrosion-Prone Applications No. of Poles 3…4 3…4 3…4 6 6 Catalogue Number 194L-G3576 194L-G3664 194E-G3666 194E-G3664 194E-G3666 Catalogue Number 194L-G3673 Description Use with Enclosures Catalogue Number 194L-G3663, G3664, G3665, G3666 (5 per package) 194L-G3572 and G3676 (5 per package) Additional Earth/Ground and Neutral Terminals — For Thermoplastic Enclosure 194L-G3653 ➊ Modifications: Up to two suffix codes may be added to an enclosed disconnect load switch. Example: Catalogue Number 194E-CA20-NP is a disconnect load switch with a power pole in a stainless steel enclosure (see page 10-14). Accessories — Page 10-11 Specifications — Page 10-17 Approximate Dimensions — Page 10-19 10-10 IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Accessories Auxiliary Contacts Type 1 N.O. + 1 N.C. 194E-E25…100 194E-A25…100 1 N.O. + 1 N.C.L.B. 194E-E25…100 194E-A25…100 2 N.O. + 2 N.C. 194E-E25…100 194E-A25...100 1 N.O. E.B. 194E-E25...100 Additional Pole Use with Catalogue Number 194E-A25 194E-A32 194E-A40 194E-A63 194E-A80 194E-A100 194E-E25 194E-E32 194E-E40 194E-E63 194E-E80 194E-E100 Use with Catalogue Number 194E-A25/32 194E-A40/63 194E-A80/100 194E-E25/32 194E-E40/63 194E-E80/100 Neutral Terminal Use with Catalogue Number 194E-A25/32 194E-A40/63 194E-A80/100 194E-E25/32 194E-E40/63 194E-E80/100 ➊ A maximum of two side-mount accessories may be added to a 194E switch. 194E-E-PD10 Catalogue Number ➊ 194E-A25-NP 194E-A32-NP 194E-A40-NP 194E-A63-NP 194E-A80-NP 194E-A100-NP 194E-E25-NP 194E-E32-NP 194E-E40-NP 194E-E63-NP 194E-E80-NP 194E-E100-NP Catalogue Number ➊ 194E-A32-PE 194E-A63-PE 194E-A100-PE 194E-E32-PE 194E-E63-PE 194E-E100-PE Catalogue Number ➊ 194E-A32-TN 194E-A63-TN 194E-A100-TN 194E-E32-TN 194E-E63-TN 194E-E100-TN 194E-E-P22 194E-A-PD10 194E-E-PL11 194E-A-P22 194E-E-P11 194E-A-PL11 Use with Catalogue Number 194E-A25…100 Catalogue Number ➊ 194E-A-P11 Earthing/Grounding Terminal Product Selection — Page 10-3 10-11 IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Accessories Base/DIN Rail Mounting (1) 4-Pole Auxiliary Contact or (1) 2-Pole Auxiliary Contact or Grounding Terminal Front/Door Mounting (1) 4-Pole Auxiliary Contact or (1) 2-Pole Auxiliary Contact or Grounding Terminal or Additional Pole Additional Pole or Neutral Terminal or (1) 2-Pole Auxiliary Contact or (1) 4-Pole Auxiliary Contact Neutral Terminal or (1) 2-Pole Auxiliary Contact or (1) 4-Pole Auxiliary Contact Terminal Covers Number of Poles Use with Catalogue Number 194E-25/32 194E-40/63 Catalogue Number 194E-25-C3 194E-40-C3 194E-80-C3 194E-25-C4 194E-40-C4 194E-80-C4 3 194E-80/100 194E-25/32 194E-40/63 4 194E-80/100 6-Pole Mechanical Coupling Use with Catalogue Number 194E-25/32 194E-40/63 194E-80/100 Catalogue Number 194E-G3660 194E-G3661 194E-G3662 Note: User must order (2) Bulletin 194E 3-Pole Switches separately. Product Selection — Page 10-3 10-12 IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Accessories (continued) Blank Legend Plate with Bezel Package Quantity Catalogue Number 194L-A4-000 194L-A6-000 194L-A8-000 194L-I4-000 194L-I6-000 194L-I8-000 Catalogue Number 194L-A4-175 194L-A6-175 194L-A8-175 194L-I4-175 194L-I6-175 194L-I8-175 Catalogue Number 194L-A4-175I 194L-A6-175I 194L-A8-175I 194L-I4-175I 194L-I6-175I 194L-I8-175I 10 0-1 Marked Legend Plates with Bezel Package Quantity 10 OFF-ON Marked Legend Plate w/Bezel Package Quantity 10 Additional Legend Plates/Frames Colour Legend Size Use with Legend Marking (Blank) MAIN SWITCH HAUPTSCHALTER INTERR. PRINCIPALE INTERR. PRINCIPAUX INTERR. PRINCIPAL HUVUDBRYTARE WAHLSCHALTER EMERGENCY OFF (Blank) MAIN SWITCH HAUPTSCHALTER INTERR. PRINCIPALE INTERR. PRINCIPAUX INTERR. PRINCIPAL HUVUDBRYTARE WAHLSCHALTER EMERGENCY OFF Catalogue Number 194L-G3515 194L-G3515A 194L-G3515B 194L-G3515C 194L-G3515D 194L-G3515E 194L-G3515F 194L-G3515G 194L-G3515H 194L-G3667 194L-G3667A 194L-G3667B 194L-G3667C 194L-G3667D 194L-G3667E 194L-G3667F 194L-G3667G 194L-G3667H Gray/Black 19.2 mm x 49 mm 3/4 in. x 1-59/64 in. Size 6 Type G and N Style Actuators 194L-HE6G/N Red/Yellow Gray/Black 18 mm x 84 mm 11/16 in. x 3-5/16 in. Size 8 Type G and N Style Actuators 194L-HE8G/N Red/Yellow Product Selection — Page 10-3 10-13 IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Accessories (continued) Modifications for Enclosed Switches (see pages 10-9 & 10-10) Description Maximum Load Rating (A) 25 32 40 63 80 100 25/32 40/63 80/100 25/32 40/63 80/100 25/32 40/63 80/100 25/32 40/63 80/100 25/32 40/63 80/100 Suffix Power Pole -NP Auxiliary Contact (1 N.O. + 1 N.C.) Auxiliary Contact (1 N.C.E.B.) Auxiliary Contact (1 N.O.E.M. + 1 N.C.L.B.) Earthing Terminal (Ground) Neutral Terminal (Unswitched) -P11 -PD10 -PL11 -PE -TN Operating Shafts Lengths Construction Plastic 34 mm (1-11/32 in.) Metal Standard Shaft 44 mm (1-47/64 in.) 52 mm (2-3/64 in.) Interlock Shaft 57 mm (2-15/64 in.) Plastic Metal Plastic Metal Plastic 194L-G2830 194E-G3687 194L-G3194 194E-G3707 194L-G3195 194E-E… 194E-G3688 Use with Catalogue Number Catalogue Number ➊ 194L-G3380 194E-A… Shaft Extension Kits Lengths 24 mm (15/16 in.) Per Extension Sold in Qty. of 10 Per Pkg. Shaft Extension Use with Catalogue Number Catalogue Number 194E-A… 194L-G2853 Metal Shaft Extensions — with Padlock Provision in OFF Position Lengths 110 mm…235 mm (4-21/64 in. …9-1/4 in.) 230 mm…350 mm (9-3/64 in.…13-51/64 in.) ➊ Order in quantities of 100 (50 shafts per package). Use with Catalogue Number 194E-A… 194L-G3394 Catalogue Number 194L-G3393 Product Selection — Page 10-3 10-14 IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Accessories (continued) Metal Shaft Adaptor Kits — For use with 194R Type 4/4X Handles Description Kit includes bezel adapter and 194R-R1 operating shaft. Operating handle (Catalogue Number 194R-HS4) must be ordered separately. Accessory Description Locking Ring Wrench For Central-Fixing Handles Use with Catalogue Number Catalogue Number 194E-A 194E-G3675 Package Quantity 1 Catalogue Number 800E-AW1 Control Knob, Black, with Locking Facility 10 Control Knob, Red, with Locking Facility 194L-G2864N 194L-G2864R Control Knob, Type P Control Knob, Black, 31 mm (1-7/32 in.) Diameter 50 Control Knob, Red, 31 mm (1-7/32 in.) Diameter Control Knob, Black, L = 37.5 mm (1-31/64 in.) Control Knob, Black, L = 48 mm (1-57/64 in.) Control Knob, Black, L = 37.5 mm (1-31/64 in.) Control Knob, Black, L = 48 mm (1-57/64 in.) Rectangular Front Frame with Blank Nameplate L = 48 mm x 62 mm (1-57/64 in. x 2-7/16 in.) 10 Standard Black Control Knob Rectangular Front Frame Rectangular Front Frame with Blank Nameplate L = 64 mm x 78 mm (2-33/64 in. x 3-5/64 in.) 194L-G2888N 194L-G2888R 194L-G3154N 194L-G3155N 194L-G3154R 194L-G3155R 194L-G3196 50 194L-G3197 Metal Shaft Extension 10 194L-G3399 Product Selection — Page 10-3 10-15 IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Accessories (continued) Shaft for Enclosures Suitable For 194L (Base-Mounted Switches) 194L-A12(16) 194L-A12(16) 194L-A20(25) 194L-A20(25) 194L-A12(16) 194L-A12(16) 194L-A12(16) 194L-A20(25) 194L-A20(25) — No. of Contacts 1/2 3/4 1/2 3/4 5/6 7/8 9/10 5/6 7/8 — Use with 194E Switch 194E-A25(32) Suitable For Enclosure Type 194L-G3572 194L-G3576 (95 x 150 x 86 mm) 194L-G3573 194L-G3577 (95 x 150 x 111 mm) 194E-C3663 194E-G3664 (125 x 180 x 105 mm) 194E-G3665 194E-G3666 (175 x 230 x 120 mm) Shaft 194L-G3195 Standard 194L-G3194 Standard 194L-G3195 194L-G3194 Standard 194L-G3194 Standard — No. of Poles 3 and 4 Shaft Required 194L-G3194 — — — 194E-A40(63) 194E-A25(32) 194E-A80(100) 194E-A40(63) 3 and 4 6 3 and 4 6 194L-G3194 Standard 194E-G3707 Standard — — — Possible Accessory Combinations in Enclosure Aux. Contacts (single or double) X X X Additional Pole Block X On Switch Neutral Ground Termin- Terminal Block al Block X X X X X (95 x 150 x 86 mm) X X X X X X X X (125 x 180 x 105 mm) 194E-A25(32) 6 Standard X X X X X X X X (175 x 230 x 120 mm) 194E-A40(63) 6 Standard 1L+1R X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X On Enclosure Neutral Ground Termin- Terminal Block al Block Enclosure Type Switch No. of Poles Shaft 194L-G3572 194L-G3576 194E-A25(32) 3 194L-G3194 194E-G3663 194E-G3664 194E-A40(63) 3 194L-G3194 194E-G3665 194E-G3666 194E-A80(100) 3 194E-G3707 Product Selection — Page 10-3 10-16 IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Specifications Electrical Ratings Performance Data Rated operational voltage (Ue): IEC ➊ Rated operational voltage (Ue): UL, CSA Rated insulation voltage (Ui): IEC/UL, CSA Rated impulse voltage (Uimp): UL, CSA Test voltage, (Ui) 1 minute Lost power per pole Rated frequency Conventional free air thermal current Ith ➊ Conventional enclosed thermal current Ith ➊ Rated current Ie ➊ AC-1/ AC-21A Non inductive or only slightly inductive loads Switching of resistive loads with slight overload 230V 400V 690V 230V 400V 690V 400/415V [A] 25 32 40 63 80 100 10 25 A IEC Applications [V] 690 [V] [V] [kV] [kV] w [Hz] [A] [A] 600 8 2.5 1.0 50/60 30 25 32 A 690 600 8 2.5 1.5 50/60 40 32 40 A 690 600 8 2.5 1.6 50/60 50 40 63 A 690 600 8 2.5 2.4 50/60 75 63 80 A 690 600 8 2.5 3.6 50/60 100 80 100 A 690 600 8 2.5 5.5 50/60 120 100 Aux. Contacts 690 600 690/600 8 2.5 0.4 50/60 10 ➋ 6 690/600 690/600 690/600 690/600 690/600 690/600 Rated power Pe Occasional switching of 3∅ motors and other highly inductive loads (criterion for selecting main switches) Squirrel-cage motors; starting and stopping of running motors [kW] [kW] [kW] [kW] [kW] [kW] [kA] [A] [A] [A] [A] [A] [A] [A] [A] [A] [A] [A] [A] [A] [A] [A] [A] [A] [A] [kW] [kW] [kW] [kW] [kW] 7.5 11 11 5.5 7.5 7.5 20 25 900 204 232 136 25 6 1 0.5 25 23 5 1 0.6 25 13 22 1.5 1.3 1.1 0.9 0.6 0.4 7.5 15 15 7.5 11 11 15 25 900 204 232 136 32 6 1 0.5 32 25 6 1 0.6 32 15 2.2 0.6 1.5 1.3 1.1 0.6 0.4 15 18.5 18.5 11 15 15 20 50 1300 484 336 196 40 8 1.5 0.6 40 32 8 1.5 0.8 40 20 3.6 2 2.9 2.2 1.7 0.9 0.5 18.5 22 22 15 18.5 18.5 15 63 1300 484 336 196 63 10 15 0.6 63 50 10 1.5 0.8 63 28 3.6 2 4.1 3.3 2 0.9 0.5 22 37 37 18.5 30 22 30 80 2500 780 680 376 80 16 3 0.7 80 70 16 3 1 80 50 6.5 3 5.1 5.5 3.5 1.1 0.9 30 45 45 22 37 22 25 100 2500 780 680 376 100 0 3 0.7 100 80 20 3 1 100 63 6.5 3 7.2 7 4.4 1.1 0.9 — — — — — — — — — — — — AC-23A AC-3 Short circuit current (coordination type 2) Rated conditional short-circuit current Maximum fuse rating of circuit (type g, G) Rated short-time current 1cw, 1s Rated breaking capacity AC23A (cosϕ 0.45) DC switching capacity Rated current Ie 1-pole 230V 400V 690V 48V DC-21A For resistive loads, T ≤ 1 ms Ue max = 660V 110V 220V 440V 96V 2-poles 110V in 220V series 440V 600V 110V 3-poles 220V in series 440V 600V 90V 3-poles 110V in series 220V 440V 600V — — — Rated power Pe DC-23A, DC-3, DC-5 For inductive loads, T ≤ 15 ms — ➊ See conformity to standards listed on page. ➋ Suitable also for SEV 500. 10-17 IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Specifications Electrical Ratings (continued) Performance Data Continuous current Heavy Pilot Duty Standard Duty Motor rating 60 Hz 25 A 32 A UL/CSA Applications [A] 25 32 [AC] A600 A600 [DC] — — FLA 9.8 16 HP 0.5 1 FLA 10 12 HP 1.5 2 FLA 8.5 14 HP 3 5 FLA 6.8 11.2 HP 3 5 FLA 13.6 19.2 HP 2 3 FLA 15.2 22 HP 5 7.5 FLA 14 21 HP 10 15 FLA 11 17 HP 10 15 40 A 40 — — 24 2 17 3 21 7.5 16 7.5 28 5 28 10 27 20 22 20 63 A 63 — — 34 3 28 5 26 10 20 10 40 7.5 42 15 34 25 27 25 80 A 80 — — 56 5 50 10 34 15 27 15 56 10 68 25 52 40 52 50 100 A 100 — — 80 7.5 68 15 55 25 44 25 84 15 80 30 65 50 52 50 Aux. Contacts — A600 Q600 120V, 1P 240V, 1P single-phase (2-poles) 480V, 1P 600V, 1P 120V, 3P 240V, 3P — three-phase 480V, 3P 600V, 3P — Mechanical Data Performance Data Protection class according to IEC 529 Motor rating 60 Hz actuators switch bodies Mechanical life [million operations] Max wire gauges Terminal size per IEC 947-1 fine strands 1 conductor mm2 rigid wire 1 conductor mm2 Wire gauges according to UL/CSA [AWG] 25 A 32 A 40 A 63 A 80 A 100 A Aux. Contacts IP65 IP20 0.2 A5 1…10 1.5…16 14/8 IP65 IP20 0.2 A5 1…10 1.5…16 14/8 IP65 IP20 0.2 A7 2.5…16 2.5…25 12/4 IP65 IP20 0.2 A7 2.5…16 2.5…25 12/4 IP65 IP20 0.2 A9 4…35 4…50 10/1 IP65 IP20 0.2 A9 4…35 4…50 10/1 IP65 IP20 0.2 2xA2 0.5…2.5 0.75…2.5 18/14 Environmental Data Storage Operation –40…+80°C (–40…+176°F) –25…+60°C (–13…+140°F) Product Selection — Page 10-3 10-18 IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Approximate Dimensions—mm (inches) Dimensions are not intended to be used for manufacturing purposes. Front Installation Catalogue Number 194E-E… B1 1(3/64) ... 5(13/64) B2 B1 B2 9.5 (3/8) Q H Dia. 3.3 (1/8) 3.3 (1/8) 9.5 (3/8) G P L F 6-Pole 3-Pole Actuators Catalogue Number 194L-HE4A 194L-HE4I 194L-HE4S 194L-HE6A 194L-HE6I 194L-HE6S 194L-HE6N 194L-HE6G Use with Catalogue Number 194E-E25/32 194E-E40/63 194E-E80/100 Switch Body P 28 (1-7/64) 28 (1-7/64) 28 (1-7/64) 28 (1-7/64) 28 (1-7/64) 28 (1-7/64) 34 (1-11/32) 34 (1-11/32) Q 48 x 48 (1-57/64 x 1-57/64) 48 x 48 (1-57/64 x 1-57/64) 48 x 62 (1-57/64 x 2-7/16) 64 x 64 (2-33/64 x 3-5/64) 64 x 64 (2-33/64 x 3-5/64) 64 x 78 (2-33/64 x 3-5/64) 67 x 67 (2-41/64 x 2-41/64) 67 x 67 (2-41/64 x 2-41/64) B1➊ — 48 (1-57/64) 48 (1-57/64) B2 36 (1-27/64) 36 (1-27/64) 36 (1-27/64) F 45 (1-25/32) 54 (2-1/8) 72 (2-27/32) H 64 (2-33/64) 72 (2-27/32) 90 (3-35/64) L 60 (2-3/8) 74 (2-29/32) 90 (3-35/64) G 90 (3-1/2) 108 (4-1/4) 144 (5-11/16) ➊ Does not apply to 194E-40/63A, 6-pole switches. Catalogue Number 194E-E Switch Body with Catalogue Number 194L-HCA Actuator for Central Mounting 3.2 +0.2 0 (1/8) 48 X 48 (1-57/64 X 1-57/64) 24.1 +0.4 0 (61/64) 22.3 +0.4 0 (7/8) 1(3/64)... 6(15/64) 29 (1-5/32) 24.5 (31/32) L Type 194E-E25/32 194E-E40/63 194E-E80/100 L 84.5 (3-21/64) 98.5 (3-7/8) 114.5 (4-33/64) Product Selection — Page 10-3 10-19 IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Approximate Dimensions—mm (inches) Dimensions are not intended to be used for manufacturing purposes. Base Mounting Catalogue Number 194E-A… Y 17 (43/64) F1 D3 F2 B ø3.3 (1/8) Q H E B P 5 (13/64) L X F J D3 F1 * F2 G 3-Pole Actuators Catalogue Number 194L-HE4A 194L-HE4I 194L-HE4S 194L-HE6A 194L-HE6I 194L-HE6S 194L-HE6N 194L-HE6G P Q 28 48 x 48 (1-7/64) (1-57/64 x 1-57/64) 28 48 x 48 (1-7/64) (1-57/64 x 1-57/64) 28 48 x 62 (1-7/64) (1-57/64 x 2-7/16) 28 64 x 64 (1-7/64) (2-33/64 x 3-5/64) 28 (1-7/64) 28 (1-7/64) 34 (1-11/32) 34 (1-11/32) 64 x 64 (2-33/64 x 3-5/64) 64 x 78 (2-33/64 x 3-5/64) 67 x 67 (2-41/64 x 2-41/64) 67 x 67 (2-41/64 x 2-41/64) * F=F1-F2 Cover Requirements 6-Pole Use with Catalogue Number 194E-A25/32 194E-A40/63 194E-A80/100 Switch Body Use with Cat. Number 194E-A25/32 194E-A40/63 194E-A80/100 Y min. X≥ Y max. X≥ 5 142 9.5 90 (13/64) (5-19/32) (3/8) (3-35/64) 2.5 150 9.5 90 (7/64) (5-29/32) (3/8) (3-35/64) 2.5 150 9.5 90 (7/64) (5-29/32) (3/8) (3-35/64) D3 E F1 F2 G H L J 4.5 70 30 15 90 64 84 45 (3/16) (2-49/64) (1-3/16) (19/32) (3-1/2) (2-33/64) (3-5/16) (1-25/32) 4.5 80 37 17 108 72 98 54 (3/16) (3-5/32) (1-15/32) (43/64) (4-1/4) (2-27/32) (3-55/64) (2-1/8) 5.6 95 48.5 23.5 144 90 114 72 (7/32) (3-3/4) (1-29/32) (59/64) (5-11/16) (3-35/64) (4-1/2) (2-27/32) Product Selection — Page 10-3 10-20 IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Approximate Dimensions—mm (inches) Dimensions are not intended to be used for manufacturing purposes. Base Mounting Catalogue Number 194E-A… Catalogue Number 194E-A… Switch Body with Catalogue Number 194L-G2853 Shaft Extension Shaft extensions Y 17 (43/64) B ø3.3 (1/8) B Q 24 (61/64) 4 (11/64) 24 (61/64) Switch body 2.5 (7/64) L Switch Body Catalogue Number 194E-A 194E-A 194E-A L 25/32 40/63 80/100 88 102 118 with 1 shaft extension (3-15/32) (4-1/32) (4-21/32) 112 126 142 with 2 shaft ext. (4-27/64) (4-31/32) (15-19/32) 136 150 166 with 3 shaft ext. (5-23/64) (5-29/32) (6-35/64) 160 174 190 with 4 shaft ext. (6-5/16) (6-55/64) (7-31/64) 184 198 214 with 5 shaft ext. (7-1/4) (7-51/64) (8-7/16) 208 222 238 with 6 shaft ext. (8-13/64) (8-3/4) (9-3/8) Actuators Y 2.5…9.5 (7/64…3/8) 9…18 194L-G3194 (23/64…23/32) 14…23 194L-G3195 (9/16)…(29/32) 194L-G2830 Shaft Type 194L-HE4A 194L-HE4I 194L-HE6A 194L-HE6I 194L-HE6N 194L-HE6G B 36 (1-27/64) 36 (1-27/64) 48 (1-57/64) 48 (1-57/64) 48 (1-57/64) 48 (1-57/64) Q 48 x 48 (1-57/64 x 1-57/64) 48 x 48 (1-57/64 x 1-57/64) 64 x 64 (2-33/64 x 2-33/64) 64 x 64 (2-33/64 x 2-33/64) 67 x 67 (2-41/64 x 2-41/64) 67 x 67 (2-41/64 x 2-41/64) Front Installation Catalogue Number 194E-A… Catalogue Number 194E-A Switch Body with Metal Shaft Extension 2.5(7/64)... 9.5 (3/8) A L Catalogue Number 194L-G3393 194L-G3394 A 110…235 (4-11/32…9-1/4) 230…350 (9-1/16…13-25/32) Catalogue Number 194E-A25/32 194E-A40/63 194E-A80/100 L➊ 60 (2-3/8) 74 (2-59/64) 90 (3-35/64) ➊ +2.5 (7/64) [DIN 46 277] 35 (1-3/8) Rails. Product Selection — Page 10-3 10-21 IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Approximate Dimensions—mm (inches) Dimensions are not intended to be used for manufacturing purposes. Base and Front Installation Catalogue Number 194E… with Auxiliary Contact Block Installed Contacts M 1 N.O. + 1 N.C. 9 (23/64) 18 (23/32) 2 N.O. + 2 N.C. M M Catalogue Number 194E… with 4-Pole, Ground and Neutral Terminals Catalogue Number M 14 194E-25/32 (9/16) 17.5 194E-40/63 (11/16) 22 194E-80/100 (7/8) M M Product Selection — Page 10-3 10-22 IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Approximate Dimensions—mm (inches) Dimensions are shown in millimetres (inches). Dimensions are not intended to be used for manufacturing purposes. Base Mounting Catalogue Number 194E-A… Thermoplastic Enclosures E Ø D1 Ø D1 A F F Ø D2 B E B H Complete Switches Catalogue Number Poles 3 and 4 194E-Y25/32 6 3 and 4 194E-Y40/63 6 194E-Y80/100 3 and 4 Enclosures ABS Noryl Catalogue Number 194L-G3572 194E-G3663 194E-G3663 194E-G3665 194E-G3665 194L-G3576 194E-G3664 194E-G3664 194E-G3666 194E-G3666 A 150 (5-29/32) 180 (7-3/32) 180 (7-3/32) 230 (9-1/16) 230 (9-1/16) B ØD1 95 22.5 (3-3/4) (57/64) 125 37.5 (4-59/64) (1-31/64) 125 37.5 (4-59/64) (1-31/64) 175 47.5 (6-57/64) (1-7/8) 175 47.5 (6-57/64) (1-7/8) ØD2 22.5 (57/64) — — — — E 60 (2-3/8) — — 155 (6-3/32) 155 (6-3/32) F H 115 86 (4-17/32) (3-3/8) 145 105 (5-23/32) (4-1/8) 145 105 (5-23/32) (4-1/8) 195 120 (4-11/16) (4-47/64) 195 120 (4-11/16) (4-47/64) Catalogue Number 194E-A 20/32… No. of Extensions with 1 extension with 2 extensions with 3 extensions with 4 ➊ extensions with 5 ➊ extensions with 6 ➊ extensions 96 (3-25/32) 120 (4-23/32) 144 (5-43/64) 168 (6-39/64) 192 (7-9/16) 216 (8-1/2) Catalogue Number 194E-A 40/63… Inside Enclosure Depth 107 (4-7/32) 131 (5-5/32) 155 (6-7/64) 179 (7-3/64) 203 (8) 227 (8-15/16) Catalogue Number 194E-A 80/00… 114 (4-31/64) 138 (5-7/16) 162 (6-3/8) 186 (7-21/64) 210 (8-17/64) 234 (9-7/32) ➊ +2 When more than 4 modules are used, attach the first one to the switch body using the screws supplied with the extension (Catalogue Number: 194L-G2853). Product Selection — Page 10-3 10-23 IEC Load Switches Bulletin 194E 25 Amps to 100 Amps Approximate Dimensions—mm (inches) Dimensions are not intended to be used for manufacturing purposes. Enclosed Switches 3/8 (9.7) 7-23/64 (186.9) 3/8 (9.7) 7-7/8 (200.2) 7-1/2 (190.5) 6-3/4 (171.5) 9-1/2 8-3/4 (241.3) (222.3) (4)- 5/16 (7.9)DIA. MTG. HOLES 1-15/64 (31.2) 2 (50.8) 4-15/16 (125.5) (4)- 5/16 (7.9)DIA. MTG. HOLES 1-15/64 (31.2) 4.00 (101.6 6-15/16 (176.3) Dim Ref. A1 194E-CA20…63, 194E-FA20…63, 194E-AA20…63 Dim Ref. B1 194E-CA80…00, 194E-FA80…00, 194E-AA80…00 1/2 (11.9) 7-3/8 (188.0) 8-11/16 (220.5) 4-29/32 (125.0) 7-1/2 (190.5) 6-7/8 6-3/16 (175.0) (157.0) 10-15/16 10 (277.9) (254.0) (4)-3/16 (4.6) DIA. MTG. HOLES 11/32 (8.9) 4-3/16 (106.9) (4)-5/16 (7.1)DIA. MTG. HOLES 1/2 (11.9) 6-1/2 (164.1) Dim Ref. C1 194E-KA20…63 Dim Ref. B1 194E-KA80…00 Product Selection — Page 10-3 10-24