440K-C21070

Interlock Switches Tongue Switches Cadet 3 Specifications Standards EN954-1, ISO13849-1, IEC/EN60204-1, NFPA79, EN1088, ISO14119, IEC/ EN60947-5-1, ANSI B11.19, AS4024.1 Cat. 1 Device per EN954-1 Dual channel interlocks suitable for Cat. 3 or 4 systems CE marked for all applicable directives, cULus, TUV Nord 2 N.C. or 3 N.C. direct opening action 600V 1.2A 600V 0.4A 10A 5V 5mA DC 5mΩ (Ui) 500V 1 N.O. 3 5mm (0.098in) 150mm (5.905in) (60mm (2.36in) with GD2 kit) 15N (3.38pd) 160mm (6.299) per sec 2 Cycle per sec UL approved glass filled polyester Stainless Steel IP67 1 x M16 or quick-disconnect style -20°C to + 80°C (-4°F to +176°F) 2 x M4 Any position 1,000,000 operations 1,000,000 operations 80g (0.176lbs) Red 500V 240V 120V 1.4A 3A 6A 500V 250V 125V 0.55A 1.1A 2.2A Category Approvals Safety Contacts Designation/Utilization Cat. A600/AC-15 (Ue) (Ie) N600/DC-13 (Ue) (Ie) Description The Cadet 3 is a tongue (or key) operated safety interlock switch designed to fit at the leading edge of sliding, hinged or lift-off guards. With its dual entry slots and rotatable head, the versatile Cadet 3 can offer up to eight different actuator entry options. The unique compact housing (90.5 x 31 x 30.4mm (3.56 x 1.22 x 1.19in)) has industry standard DIN 50047 fixing centres for ease of mounting. Operation of the switch is achieved through the insertion of a specially profiled stainless steel key that is permanently mounted to the guard door. A semi-flexible key allows the Cadet 3 to be used on small radii doors (60mm or 2.36in). Available with a variety of contact configurations, the Cadet 3 is sealed to IP67. A blanking plug is supplied for the unused key entry. Thermal Current (lth) Min Current Typical Contact Resistance Rtd. Insulation Voltage Auxiliary Contacts Pollution Degree ➊ Actuator Travel for Positive Opening Min Operating Radius Break Contact Min Force Max Actuation Speed Max Actuation Frequency Case Material Actuator Material Protection Conduit Entry Operating Temperature Fixing Mounting Mechanical Life Electrical Life Weight Colour Rtd. Impulse Withstand Volt. (Uimp) 2500V Features • • • • • • Compact size Ideal for small, light weight guards Contacts, 2 N.C. + 1 N.O. or 3 N.C. Sealed to IP67 Eight possible actuator entry points, easy to install Industry standard fixing centres to DIN 50047 ➊ Conductive pollution occurs, or dry, non conductive pollution occur which becomes conductive due to condensation. Applications Note: Lift-off guards require good alignment when using tongue actuated interlock switches. IMPORTANT: It must not be possible to lift the guard without actuating the interlock. An interlock on either side may be required. 3-6 Interlock Switches Tongue Switches Cadet 3 Product Selection Catalogue Number Safety Contacts Auxiliary Contacts BBM/MBB Actuator Flat 90° 3 N.C. — — GD2 Metal Alignment Guide with SemiFlex Actuator — Flat 90° BBM GD2 Metal Alignment Guide with SemiFlex Actuator — Flat 90° MBB GD2 Metal Alignment Guide with SemiFlex Actuator — M16 Conduit 440K-C21096 440K-C21097 — 440K-C21070 440K-C21098 440K-C21061 — 440K-C21055 440K-C21052 440K-C21065 — 440K-C21080 M16 Conduit/ 1/2in Adaptor 440K-C21048 440K-C21057 440K-C21062 — 440K-C21050 440K-C21058 440K-C21074 — 440K-C21093 440K-C21094 440K-C21095 — Quick Disconnect 440K-C21090 440K-C21091 440K-C21092 — 440K-C21054 440K-C21067 440K-C21088 — 440K-C21060 440K-C21068 440K-C21089 — 2 N.C. 1 N.O. Recommended mating cable, 2m (6.5ft). See page 15-11 for details and additional lengths. 889R-F6ACA-2 Accessories Description For Dimensions See Page Catalogue Number Flat Actuator 14-6 440K-A21014 90° Actuator 14-6 440K-A21006 GD2 Metal Alignment Guide with Semi-Flexible Actuator 14-6 440K-A21030 3-7 Interlock Switches Tongue Switches Cadet 3 Approximate Dimensions—mm (inches) Dimensions are not intended to be used for installation purposes. 90.5 (3.56) 38.4 (1.51) 36.4 (1.43) 34.4 (1.35) Front Entry 13.0 (0.51) 20.0 (0.79) 22.0 (0.87) 31.0 (1.22) 4.5 (0.18) R 2.15 4 (0.16) M16 Thread Form 25.0 (0.98) 25.0 (0.98) 30.4 (1.2) 13.0 (0.51) 4 (0.16) 4.5 (0.18) 13.0 (0.51) 3-8 Interlock Switches Tongue Switches Cadet 3 Typical Wiring Diagrams (shown with guard closed, actuator inserted) 2 N.C. + 1 N.O. 3 N.C. 33 34 21 22 11 12 31 32 21 22 11 12 2 N.C. + 1 N.O. Connector Pinout 1 5 2 6 3 4 Terminal 11 12 21 22 33 34 Contact N.C. N.C. N.O. Terminal 11 12 21 22 31 32 3 N.C. Contact N.C. N.C. N.C. 3 N.C. 3.8 11/12 21/22 31/32 0mm Contact Action Contact Open Contact Closed Actuator withdrawal distance from full insertion 2 N.C. + 1 N.O. (BBM) 3.8 11/12 21/22 33/34 4.5 0mm 2 N.C. + 1 N.O. (MBB) 3.8 11/12 21/22 33/34 3.3 0mm 3-9