440N-N15028

Interlock Switches Non contact Switches Sentinel 1 Specifications Standards EN954-1, ISO13849-1, IEC/EN60204-1, NFPA79, EN1088, ISO14119, IEC60947-5-1, ANSI B11.19, AS4024.1 Cat. 3 per EN954-1 CE marked for all applicable directives 24V AC/DC, 48V AC, 110V AC, 230V AC < 2VA Category Approvals Power Supply Power Consumption Internal Fuses Power 250mA replaceable N.C. Output 2A replaceable Operating Distance Make 7mm (0.28in) Break 10mm (0.39in) Description The Sentinel 1 is an electro-magnetically coded standalone Non contact interlock. It operates without a safety relay while providing a highly coded system to help prevent defeat of the switch by simple magnets. Self-checking and monitoring functions are contained in the switching unit which also has LED status indication. The Sentinel 1 has 1 N.O. and 1 N.C. output and is supplied prewired. A replaceable fuse for overload protection is easily accessed by removing the front of the switch with a security bit. Misalignment Tolerance Output Rating Minimum Switching Capability Indication LEDs Impulse Withstand Voltage Operating Temperature Humidity Enclosure Protection Cable Case Material Mounting Weight (not including cable) Electrical Life Mechanical Life Vibration Shock ±5mm (0.2) make and break B300, AC-15, 2A/250V AC P300, DC-13, 2A/250V DC 10mA/10V Green = Guard closed 2500V -25°C to +125°C (-13°F to +257°F) 90% RH IP65 (NEMA 13) 0.75 sq. mm2 (18 AWG) 2 wire PVC Jacket OD 7.5mm (.3in) Red reinforced ABS Any position M4 mounting security screws included Sensor Actuator 120g (0.26lbs) 39g (0.09lbs) 100,000 at rated load 1,000,000 at no load 10-55Hz, 1mm displacement 8g, 11ms half-sine Features • • • • • Non contact actuation Electro-magnetic coding Standalone operation Plastic box style housing (IP65) Terminal connections 3-64 Interlock Switches Non contact Switches Sentinel 1 Product Selection Safety Contacts Auxiliary Contacts Power Supply Connection 2m Cable 24V AC/DC 4m Cable 6m Cable 12m Cable 48V AC 1 N.C. 1 N.O. 110V AC 2m Cable 2m Cable 6m Cable 2m Cable 230V AC 4m Cable 12m Cable Note: Contacts are described with the guard door closed, that is, actuator in place. Switch is shipped complete with actuator. Catalogue Number 440N-N15017 440N-N15023 440N-N15021 440N-N15041 440N-N15028 440N-N15015 440N-N15027 440N-N15013 440N-N15024 440N-N15040 Accessories Description Replacement Actuator Replacement Fuse 2A Replacement Fuse 250mA Page Number — 14-2 14-2 Catalogue Number 440N-A15005 440A-A09197 440A-A09196 Approximate Dimensions—mm (inches) Dimensions are not intended to be used for installation purposes. Switch Actuator 19 (0.75) 5 (0.2) 38 (1.5) 36 (1.42) 4 (0.16) 7 (0.28) 4.5 (0.18) = = 4.5 (0.18) = 69 (2.72) 57 (2.24) 73 (2.87) Mounting 2 x M4 50 (1.97) 5 (0.2) 19 (0.75) = 82 (3.23) 3-65 Interlock Switches Non contact Switches Sentinel 1 Typical Wiring Diagrams Sentinel 1 Sensor Red + Supply Voltage - Blue Black Safety N.C. Fuse Externally White Yellow Auxiliary N.O. Green Application Details Operating Principle On presenting the actuator to the switch, the highintensity electromagnetic field together with a resonant frequency signal causes the contacts to close. On removing the actuator, (opening the door) the safety contacts open, isolating the machine. The switch can not be overridden by magnets, tools, etc. Actuator Approaches ✔ ✔ ✔ 3-66 Interlock Switches Non contact Switches Sentinel 1 Application Details—Installation Mounting Hinge Guards Switch Switch 2mm Minimum 5mm Maximum Guard Actuator Actuator ≤25mm Switch Actuator Door stop Double Hinge Guards Lift Off Guards Sliding Guards 2mm Minimum 5mm Maximum 2mm Minimum 5mm Maximum Switch Actuator Switch Switch Guard Actuator Guard Actuator Door stop 3-67