440P-MSLB13M9

Position Interlock Switches Safety Limit Switches Large Metal Senator Specifications Standards EN954-1, ISO13849-1, IEC/EN60204-1, NFPA79, EN1088, ISO14119, IEC/ EN60947-5-1, ANSI B11.19, AS4024.1 Cat. 1 Device per EN954-1 Dual channel interlocks suitable for Cat. 3 or 4 systems cULus, TUV and CE marked for all applicable directives 1 N.C. snap acting, 2 N.C., 3 N.C. or 4 N.C. slow acting 1 N.O. (with 2 N.C.) 600V 500V 240V 120V 1.2A 1.4A 3A 6A 600V 500V 250V 125V 0.4A 0.55A 1.1A 2.2A 5V, 5mA, DC 10A 600V AC 2500V Various (see Product Selection table) 250mm/s 100mm/min 6000 operation per hour Die cast alloy See “Product Selection” table IP 66 Min -25°C (-18°F) Max 80°C (+176°F) 3 1 x 107 M20 or 1/2in NPT 2 x M5 Any position Red Category Approvals Safety Contacts Auxiliary Contacts Designation/Utilization Cat. A600/AC-15 (Ue) (Ie) N600/DC-13 (Ue) (Ie) Min Current Thermal Current (lth) Rated Insulation Voltage Rated Impulse withstand Volt Travel for Positive Opening Max Switching Speed Min Switching Speed Max Switching Frequency Case Material Actuator Material Enclosure Protection Operating Temperature Pollution Degree ➊ Mechanical Life Expectancy Conduit Entry Fixing Mounting Colour Description The large metal Senator safety limit switches conform to EN 50041 and have been developed to provide a range of options including metal or plastic cases in various sizes, a choice of snap acting, slow break/make with 2, 3 or 4 contact configurations and a choice of actuator heads. The Senator range offers the option of rotating the head in 90° increments before installation to allow ease of mounting. Allen-Bradley/Guardmaster limit switches can be used in other applications other than guard doors, for example on moving machine beds, crane arms, lifts, elevators, etc. Operation of these limit switches is achieved by the sliding action of the guard or other moving object deflecting the plunger or lever. For safety applications it is important that upon actuation, the guard or other moving objects should not pass completely over the switch and allow the plunger or lever to return to its original position. Features • Large selection of actuator heads • Positive operation, forced disconnection of contacts • Snap-acting, slow make before break or slow break before make contact blocks • Contacts 1 N.C. + 1 N.O., 2 N.C. + 1 N.O. 3 N.C., 2 N.C. + 2 N.O., 3 N.C. + 1 N.O., or 4 N.C. • Conforms to EN 50041, EN 1088, EN 60947-5-1, EN 292 and EN 60204-1 ➊ Conductive pollution occurs, or dry, non conductive pollution occurs which becomes conductive due to condensation. Operating Examples Cam Displacement (A) 30° Adjustable Lever Arms 30° 30° 30° 30° 60° 60° 60° 60° Applications Types The actuating cam should be profiled at 30° for optimum operation. (Note: Plunger-type switches operate from a flat profile. 7-8 Position Interlock Switches Safety Limit Switches Large Metal Senator Product Selection Contacts Operator Type Contact Type Snap Acting Typical Force/ Torque to Operate Contact Opening Characteristics Open Closed Positive Opening Point 0mm 11-12 2.3 10N 4.5 7.5 Catalogue Number 1/2in NPT Conduit Quick Disconnect ➊ Safety Aux. M20 Conduit 1 N.C 1 N.O 13N 23-24 11-12 23-24 1.3 440P-MRPS11E 440P-MRPS11B 440P-MRPS11N5 0mm 1.4 10N 4.0 7.5 4 N.C — — 11N 11-12 21-22 31-32 41-42 440P-MRPB04E 1.4 10N 440P-MRPB04B 440P-MRPB04M9 0mm 11-12 4.0 7.5 3 N.C. 1 N.O BBM 11N 21-22 31-32 43-44 1.9 440P-MRPB13E 440P-MRPB13B 440P-MRPB13M9 Metal Roller Plunger 0mm 11-12 1.5 10N 4.0 7.5 2 N.C 2 N.O MBB 11N 21-22 33-34 43-44 1.9 440P-MRPB22E 440P-MRPB22B 440P-MRPB22M9 0mm 2.7 10N 4.5 7.5 1 N.C 1 N.O Snap Acting 11-12 13N 23-24 11-12 23-24 1.6 440P-MDPS11E 440P-MDPS11B 440P-MDPS11N5 0mm 1.7 10N 4.0 7.5 4 N.C — — 11N 11-12 21-22 31-32 41-42 440P-MDPB04E 1.6 10N 440P-MDPB04B 440P-MDPB04M9 0mm 11-12 4.0 7.5 3 N.C. 1 N.O BBM 11N 21-22 31-32 43-44 2.0 440P-MDPB13E 440P-MDPB13B 440P-MDPB13M9 Metal Dome Plunger 0mm 11-12 1.5 10N 4.0 7.5 2 N.C 2 N.O MBB 11N 21-22 33-34 43-44 2.0 440P-MDPB22E 440P-MDPB22B 440P-MDPB22M9 83˚ 54˚ 35˚ 35˚ 54˚ 35 cNm 0˚ 35cNm 83˚ 1 N.C 1 N.O Snap Acting 11-12 0.34Nm 23-24 11-12 23-24 15˚ 15˚ 440P-MSLS11E 440P-MSLS11B 440P-MSLS11N5 83˚ 44˚ 21˚ 0˚ 21˚ 44˚ 35cNm 10cNm 83˚ 4 N.C — — 0.20Nm 11-12 21-22 31-32 41-42 440P-MSLB04E 440P-MSLB04B 440P-MSLB04M9 83˚ 11-12 20˚ 20˚ 44˚ 44˚ 35cNm 0˚ 35cNm 83˚ 3 N.C. Metal Short Lever 1 N.O BBM 0.34Nm 21-22 31-32 43-44 26˚ 26˚ 440P-MSLB13E 440P-MSLB13B 440P-MSLB13M9 83˚ 11-12 20˚ 20˚ 44˚ 44˚ 35cNm 0˚ 35cNm 83˚ 2 N.C 2 N.O MBB 0.34Nm 21-22 33-34 43-44 26˚ 26˚ 440P-MSLB22E 440P-MSLB22B 440P-MSLB22M9 889N-F5AE-6F 889M-F12X9AE-2 Recommended standard cordset, 2m, 5-pin mini connector. See page 15-12 for additional lengths. Recommended standard cordset, 2m, 12-pin 9 wire. See page 15-12 for additional lengths. ➊ N5 = 5-pin mini connector. M9 = 12-pin M23 connector (use 9 wire). 7-9 Position Interlock Switches Safety Limit Switches Large Metal Senator Product Selection (continued) Contacts Operator Type Contact Type Snap Acting Typical Force/ Torque to Operate Contact Opening Characteristics Open Closed Positive Opening Point 83˚ 11-12 54˚ 35˚ 35˚ 54˚ 35 cNm 0˚ 35cNm 83˚ Catalogue Number 1/2in NPT Conduit Quick Disconnect ➊ Safety Aux. M20 Conduit 1 N.C 1 N.O 0.34Nm 23-24 11-12 23-24 15˚ 15˚ 440P-MALS11E 440P-MALS11B 440P-MALS11N5 83˚ 21˚ 0˚ 21˚ 44˚ 44˚ 35cNm 10cNm 83˚ 4 N.C — — 0.20Nm 11-12 21-22 31-32 41-42 440P-MALB04E 440P-MALB04B 440P-MALB04M9 83˚ 11-12 20˚ 20˚ 44˚ 44˚ 35cNm 0˚ 35cNm 83˚ 3 N.C. Metal Adjustable Lever ➋ 1 N.O BBM 0.34Nm 21-22 31-32 43-44 26˚ 26˚ 440P-MALB13E 440P-MALB13B 440P-MALB13M9 83˚ 11-12 20˚ 20˚ 44˚ 44˚ 35cNm 0˚ 35cNm 83˚ 2 N.C 2 N.O MBB 0.34Nm 21-22 33-34 43-44 26˚ 26˚ 35˚ 35˚ 54˚ 35 cNm 0˚ 35cNm 440P-MALB22E 440P-MALB22B 440P-MALB22M9 83˚ 54˚ 83˚ 1 N.C 1 N.O Snap Acting 11-12 0.34Nm 23-24 11-12 23-24 15˚ 15˚ 440P-MARS11E 440P-MARS11B 440P-MARS11N5 83˚ 44˚ 21˚ 0˚ 21˚ 44˚ 35cNm 10cNm 83˚ 4 N.C — — 0.20Nm 11-12 21-22 31-32 41-42 440P-MARB04E 440P-MARB04B 440P-MARB04M9 83˚ 11-12 20˚ 20˚ 44˚ 44˚ 35cNm 0˚ 35cNm 83˚ 3 N.C. 1 N.O BBM 0.34Nm 21-22 31-32 43-44 26˚ 26˚ 440P-MARB13E 440P-MARB13B 440P-MARB13M9 83˚ 11-12 20˚ 20˚ 44˚ 44˚ 35cNm 0˚ 35cNm 83˚ 440P-MARB22E 33-34 43-44 Metal Rod 26˚ 26˚ Lever ➋ Recommended standard cordset, 2m, 5-pin mini connector. See page 15-12 for additional lengths. Recommended standard cordset, 2m, 12-pin 9 wire. See page 15-12 for additional lengths. 2 N.C 2 N.O MBB 0.34Nm 21-22 440P-MARB22B 440P-MARB22M9 889N-F5AE-6F 889M-F12X9AE-2 ➊ N5 = 5-pin mini connector. M9 = 12-pin M23 connector (use 9 wire). ➋ Not positive opening 7-10 Position Interlock Switches Safety Limit Switches Large Metal Senator Product Selection (continued) Contacts Operator Type Contact Type Snap Acting Typical Force/ Torque to Operate Contact Opening Characteristics Open Closed 90˚ 11-12 32˚ 20cNm 32˚ 0˚ 20cNm 90˚ Catalogue Number 1/2in NPT Conduit Quick Disconnect ➊ Safety Aux. M20 Conduit 1 N.C 1 N.O 0.20Nm 23-24 11-12 23-24 10˚ 10˚ 440P-MSRS11E 440P-MSRS11B 440P-MSRS11N5 90˚ 17˚ 0˚ 17˚ 20cNm 20cNm 90˚ 4 N.C — — 0.20Nm 11-12 21-22 31-32 41-42 8 440P-MSRB04E 440P-MSRB04B 440P-MSRB04M9 90˚ 11-12 19˚ 19˚ 20cNm 0˚ 20cNm 90˚ 3 N.C. 1 N.O BBM 0.20Nm 21-22 31-32 43-44 24˚ 24˚ 440P-MSRB13E 440P-MSRB13B 440P-MSRB13M9 90˚ 11-12 18˚ 18˚ 20cNm 0˚ 20cNm 90˚ Metal Spring Rod ➋ 2 N.C 2 N.O MBB 0.20Nm 21-22 33-34 43-44 26˚ 26˚ 440P-MSRB22E 440P-MSRB22B 440P-MSRB22M9 90˚ 39˚ 20cNm 39˚ 0˚ 20cNm 90˚ 1 N.C 1 N.O Snap Acting 11-12 0.20Nm 23-24 11-12 23-24 10˚ 10˚ 440P-MTAS11E 440P-MTAS11B 440P-MTAS11N5 90˚ 24˚ 0˚ 24˚ 20cNm 20cNm 90˚ 4 N.C — — 0.20Nm 11-12 21-22 31-32 41-42 8 440P-MTAB04E 440P-MTAB04B 440P-MTAB04M9 90˚ 11-12 23˚ 23˚ 20cNm 0˚ 20cNm 90˚ 3 N.C. 1 N.O BBM 0.20Nm 21-22 31-32 43-44 30˚ 30˚ 440P-MTAB13E 440P-MTAB13B 440P-MTAB13M9 90˚ 11-12 21-22 24˚ 24˚ 20cNm 0˚ 20cNm 90˚ 440P-MTAB22E 2 N.C 2 N.O MBB 0.20Nm 33-34 43-44 Telescope 31˚ 31˚ Arm ➋ Recommended standard cordset, 2m, 5-pin mini connector. See page 15-12 for additional lengths. Recommended standard cordset, 2m, 12-pin 9 wire. See page 15-12 for additional lengths. ➊ N5 = 5-pin mini connector. M9 = 12-pin M23 connector (use 9 wire). ➋ Not positive opening 440P-MTAB22B 440P-MTAB22M9 889N-F5AE-6F 889M-F12X9AE-2 7-11 Position Interlock Switches Safety Limit Switches Large Metal Senator Typical Wiring Diagram 4 N.C. 41 31 21 11 1 N.O. 1 N.C. 11 23 1 N.O. 3 N.C. 43 31 21 11 2 N.O. 2 N.C. 43 33 21 11 42 32 22 12 12 24 44 32 22 12 44 34 22 12 Same polarity this side of block N5 Connector 2 Circuit 5-Pin Mini Connector 1 (N.C.) 11 12 23 24 Auxiliary Circuit (N.O.) M9 12-Pin M23 Connector 4 N.C. Connector Pinout 1 3 4 6 7 8 9 10 12 Terminal 11 12 21 22 31 32 41 42 Contact N.C. N.C. N.C. N.C. 3 N.C. 1 N.O. Terminal 11 12 21 22 31 32 43 44 Ground Contact N.C. N.C. N.C. N.O. 2 N.C. 2 N.O. Terminal 11 12 21 22 33 34 43 44 Contact N.C. N.C. N.O. N.O. 8 7 6 5 12 9 11 1 10 2 3 4 Approximate Dimensions—mm (inches) Dimensions are not intended to be used for installation purposes. 17 (0.66) Dia. 21 (0.82) 19 (0.74) 48 (1.88) 34 (1.33) 30 (1.18) 118 (4.64) 60 (2.36) 30 (1.18) 105 (4.13) 63 (2.48) 18 (0.70) Dia. 64 (2.51) 7 (0.27) 60 (2.36) 60 (2.36) 30 (1.18) 133 (5.23) 40 (1.57) 33 (1.29) 43 (1.69) 40 (1.57) 33 (1.29) 43 (1.69) 40 (1.57) 43 (1.69) Roller Plunger Dome Plunger Short Lever 7-12 Position Interlock Switches Safety Limit Switches Large Metal Senator Approximate Dimensions—mm (inches) (continued) Dimensions are not intended to be used for installation purposes. 17 (0.66) Dia. 85 (3.34) Max. 16 (0.62) 64 (2.51) 7 (0.27) 5 (0.19) Dia. 240 (9.44) Max Extension 30 (1.18) 103 (4.05) 172 (6.77) Max. Extension 57 (2.24) 16 (0.62) 103 (4.05) 30 (1.18) 60 (2.36) 60 (2.36) 40 (1.57) 43 (1.69) 40 (1.57) 33 (1.29) 43 (1.69) Adjustable Lever Rod Lever 10 (0.39) Dia. 303 (11.92) Min Extends to 900 (35.43) Max 211 (8.3) 60 (2.36) 30 (1.18) 60 (2.36) 30 (1.18) 11 (0.43) 11 (0.43) 40 (1.57) 43 (1.69) 40 (1.57) 43 (1.69) Spring Rod Telescopic Arm 7-13