440T-MDSLE23

Prosafe Trapped Key Interlock Switches Slamlock Mechanical Specifications Standards EN292-1&2, EN1088, IEC/EN60947-51, GS-ET-19, ISO12100-1&2, ISO14119, AS4024.1 Cat. 1 per EN 954-1 (ISO 13849-1) Suitable for Cat. 2, 3, or 4 systems BG, CE marked for all applicable directives, and C-Tick not required -40°C to +200°C (-40°F to +392°F) In excess of 105 operations under normal working conditions. 15.1kN (3398lbs) 14Nm (124lb•in) 95% RH Single key version Dual key version Code Barrels Ambient Working Temp Material Mounting SSL DSS Max Holding Force 2 x M5 Counterbored from Top or 2 x M5 from Underside with Nuts 4 x M5 Counterbored from Top or 4 x M5 from Underside with Nuts 2000N (450lbs) 760gm (0.76kg (1.68lbs)) 1332gm (1.33kg (2.93lbs)) Tested to 100,000 operations -10°C to +50°C (14°F to +122°F) 316L Stainless Steel Category Approvals Single Dual Operating Temperature Mechanical Operations Max Shear Force to Key Max Torque to Key Humidity Weight Description The Prosafe Slamlock combines the features of trapped keys with tongue actuated interlocks. When the actuator is inserted into the interlock (guard closed), the trapped key can be rotated and removed. With the key free, the actuator can not be removed thus locking closed the guard door. The trapped key must be re-inserted and rotated 90° to unlock the guard. Slamlocks are manufactured in 316L stainless steel to provide a rugged, industrial grade method of interlocking guard doors. One advantage of the slamlock is that there is no need to run power wires to the gate. Power is disconnected by a trapped key on a control panel or by a Prosafe RKS type unit and the key is then hand-carried to the gate by the operator. The single key Slamlock (SSL) is used to interlock hatches, guards and doors where full body access is not required. Dual key Slamlock (DSL) is similar to the single key version but has a secondary key to allow ‘2 key in’ or ‘key exchange’ conditions. The key exchange version may be used where whole body access is required, as the secondary key can be used as a personnel key. Features • • • • • • • • 316L stainless steel construction Selection of actuator types available Single or dual key versions available Direct drive operation Replaceable code barrel assembly Fitted with tamper resistant screws Weatherproof stainless steel dust cap as standard Conforms to EN 292, EN 1088, GS ET 19 The Prosafe Advantage Stainless steel construction. 5-24 Prosafe Trapped Key Interlock Switches Slamlock Mechanical Product Selection Type Single Key Key Condition Key Trapped to Release Actuator Primary Key Trapped, Secondary Key Free to Release Actuator Both Keys Free to Release Actuator Actuator Standard Flexible Flat Standard Flexible Flat Standard Flexible Flat Catalogue Number 440T -MSSLE10➊ 440T -MSSLE11➊ 440T -MSSLE12➊ 440T -MDSLE10➊➋ 440T -MDSLE11➊➋ 440T -MDSLE12➊➋ 440T -MDSLE20➊➊ 440T -MDSLE22➊➊ 440T -MDSLE23➊➊ Dual Key ➊ Substitute the desired primary code for this symbol (key not included). See page 5-6 for code selection. ➋ Substitute the desired secondary code for this symbol (key included). See page 5-6 for code selection. Approximate Dimensions—mm (inches) Dimensions are not intended to be used for installation purposes. Single Key Slamlock 38.3 (1.5) 3.5 (0.13) Double Key Slamlock 4 x M5 48 (1.88) 20.8 (0.81) Top Entry Front Entry 57.7 (2.27) 3.5 (0.13) 3.5 (0.13) 28.5 (1.22) & 30 (1.18) Pitch Range 38.3 (1.5) 43.6 (1.71) 64.1 (2.52) 57.7 (2.27) 48 (1.88) 20.8 (0.81) Top Entry 43.6 (1.71) 64.1 (2.52) 28.5 (1.22) & 30 (1.18) Pitch Range 2 x M5 Front Entry 5 (0.19) 34 (1.33) 5.5 (0.21) Code Barrel Screws M4 x 8 Torx Head 5 (0.19) 34 (1.33) 5.5 (0.21) 4 (0.15) 31 (1.22) 52 (2.04) 13 40 (1.57) 8 (0.51) (0.31) 2 Off 5.5 Slots 51 (2.0) 20 (0.78) Secondary 151 (5.94) Bottom Entry Primary Code Barrel Screws M4 x 8 Torx Head 25.4 (1.0) 25.4 (1.0) 4 (0.15) 93 (3.66) Bottom Entry 20.8 (0.81) Flexible/Adjustable Actuator 18 (0.70) 2 Holes, ±5.5 thru Standard Actuator M5 CSK 40 (1.57) 3.5 (0.13) 20.8 (0.81) Flat Actuator 57.7 (2.27) 25 (1.0) 36 (1.41) 18 (0.70) 3.5 (0.13) 52 (2.04) 18 (0.70) 19 (0.74) 4 (0.15) 36 (1.41) 14.5 (0.57) 5-25