FRS10

Interlock Switches Non contact Switches Ferrogard 6, 9 & 10 Specifications Standards EN954-1, ISO13849-1, IEC/EN60204-1, NFPA79, EN1088, ISO14119, ANSI B11.19, AS4024.1 Cat. 1 Device per EN954-1 Dual channel interlocks suitable for Cat. 3 or 4 systems CE marked for all applicable directives and cULus 1 N.C. Safety Contact 1 x 106 at rated load Category Approvals Contact Arrangements Electrical Life Description The Ferrogard range of magnetically actuated safety switches offers Non contact reliability together with tolerance to misalignment. They are designed to be installed so that when a guard door is opened, the action of the magnetic actuator being removed from the switch opens the N.C. safety contact which is intended for the isolation of control power to a machine primary control element. The FRS 6, 9 and 10 sensors and actuators incorporate slim housings to accommodate narrow mounting areas. They are environmentally sealed to IP67 (NEMA6P), which makes them ideal for wet environments. These Ferrogard switches have two active sensing faces allowing more flexible mounting options. Unlike some magnetic switches the Ferrogards have protected safety contacts to help ensure that they do not fail to danger. All Ferrogards have internal non-resettable overload protection on the safety contact. They should be protected by an external fuse rated as shown in the specifications table. Safety Contact Switching Capability FRS 6 250V AC 2A max FRS 9 24V DC 1A max FRS 10 110V AC 3A max Safety Contact External Fusing FRS 6