LRTS

Emergency Stop Devices Cable (Rope) Pull Switches Lifeline Rope Tensioner System (LRTS) Specifications Material Tensioner Cable gripper Cable gripper gears Cable P. Bolt Colour Tensioner Cable gripper Cable P. Bolt Weight Tensioner Cable gripper Operating Temperature Cable Diameter Max. Cable Adjustment Tensioner Holding Force Gripper Holding Force Protection Tensioner Adjustment Yellow Yellow/natural Red Natural 140g (0.31lb) 80g (0.17lb) -25°C to +80°C (13°F to 176°F) 4mm (0.15in) 300mm (11.8in) 500N (112.5lb) max. 280N (63.0lb) max. IP 30 5mm A/F Allen key Glass filled nylon Acetal, aluminium alloy, stainless steel Stainless steel Cable to BS 302:1987, wire Ø4.0 Stainless steel Description The LRTS is a unique cable (rope) tensioning system which enables quicker installation of cable actuated systems. Other methods are traditionally time consuming and sometimes awkward to fit. Features of the system include: 1. Cable adjustment up to 300mm (11.8in) (150mm (5.9in) either side of tensioner) 2. Quick thread and grip of cable with cable grip 3. Cable tidy incorporated into the cable grips 4. Simple tensioning via the setting bolt with allen key. Due to the appeal of quick installation and universal use, the LRTS can also be used for applications other than cable actuated emergency stop systems. Features • • • • • Unique cable grip system Can be installed and commissioned in approximately 3 minutes Ease of installation, no specialist tools required Up to 300mm (11.8in) of cable adjustment Cable tidy incorporated into cable grips Four Steps to Install Typical Applications 6-2 Emergency Stop Devices Cable (Rope) Pull Switches Lifeline Rope Tensioner System (LRTS) Product Selection Description Installation kit—5m Installation kit—10m Installation kit—15m Installation kit—20m Installation kit—30m Installation kit—50m Installation kit—75m Catalogue Number 440E-A13079 440E-A13080 440E-A13081 440E-A13082 440E-A13083 440E-A13084 440E-A13085 Accessories Description Catalogue Number Tensioner and Allen wrench only 440E-A17105 Gripper 2 pack Gripper 20 pack 440E-A17107 440E-A17106 Tensioner, 2 Grippers and Allen wrench 440E-A17112 2 Tensioners, 2 Grippers and Allen wrench 15m 30m Red Cable 100m 125m 300m 500m 440E-A17140 440E-A17026 440E-A17027 440E-A17028 440E-A17129 440E-A17095 440E-A17032 Approximate Dimensions—mm (inches) Dimensions are not intended to be used for installation purposes. 90 (3.54) 12 (0.47) Dia. 43 (1.69) 70 (2.75) Dia. 40 (1.57) 25 (0.98) 45 (1.77) Cable Grip 67 (2.63) Tensioner Cable Cable Grip P. Bolts Tensioner 6-3