AHC40-5-5R0K-RC

RoHS Axial High Current Chokes AHC40 Dimensions (In.) See Table D C A C B Allied Part Number Inductance (µh) SRF Min. (MHz) DCR Max. (Ω ) Rated A B C D Current Max. Max. Max. AWG Max. (A) (Inches) (Inches) (Inches) Features • Axial leads for through-hole PC board mounting. • Pre-tinned leads. • Low cost construction • Designed for use with switching power supplies and other high current filtering applications. Electrical Inductance: Measured at 1KHz with no DC current. Rated current will decrease inductance by 10% or less. Tolerance: 10% over entire inductance range. Available in tighter tolerances. Current Rating: Max. continuous operating current (DC or RMS) at room temp. Dielectric Rating: 2500 V RMS, 60 Hz applied for one min. between winding and outer circumference to within .25 ° of the insulation sleeve edge. Temp. Rating: Continuous operation at temp. between -55 and +105 ° C. Mechanical Winding: l ayered solenoid type on magnetic core. Wire: Solid soft copper. Leads: Tinned copper wire. Cover: U.L. shrink tubing AHC40-1-500K-RC AHC40-1-101K-RC AHC40-1-251K-RC AHC40-1-501K-RC AHC40-1-102K-RC AHC40-2-270K-RC AHC40-2-500K-RC AHC40-2-101K-RC AHC40-2-251K-RC AHC40-2-501K-RC AHC40-3-5R0K-RC AHC40-3-100K-RC AHC40-3-270K-RC AHC40-3-500K-RC AHC40-3-101K-RC AHC40-5-5R0K-RC AHC40-5-100K-RC AHC40-5-270K-RC AHC40-5-500K-RC AHC40-5-101K-RC 50 100 250 500 1000 27 50 100 250 500 5 10 27 50 100 5 10 27 50 100 4.0 2.0 1.0 .8 .5 5.5 4.0 2.0 1.0 .5 25.0 20.0 6.0 4.0 2.0 50.0 40.0 7.0 2.0 1.0 .12 .18 .30 .50 .60 .085 .10 .15 .25 .45 .025 .035 .05 .065 .075 .015 .025 .035 .05 .065 1 1 1 1 1 2 2 2 2 2 3 3 3 3 3 5 5 5 5 5 .800 .800 1.05 1.05 1.17 .800 .800 .920 .920 1.05 .800 .920 .800 .920 1.17 1.05 1.05 1.05 1.05 1.30 .475 .475 .475 .550 .550 .500 .500 .500 .600 .750 .475 .475 .550 .500 .500 .475 .475 .700 .700 .700 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 20 20 20 20 20 20 20 20 20 20 20 20 20 20 18 18 18 18 18 18 Physical Packaging: 2 5 pieces per bag. All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL www.alliedcomponents.com