APC20-122K-RC

RoHS APC20 Axial Power Chokes Dimensions: Inches (mm) 20 AWG 1.15 NOMINAL (29) 0.60 (15.24) 1.15 NOMINAL (29) 0.29 (7.36) Features • Axial pre-tinned leads. • P rotected with UL shrink tubing. • Non standard values and tolerances available. • High saturation core material used for high inductance and low DCR. Allied Part Number Inductance (µh) Tolerance (%) DCR Max. (Ω ) Saturation Current (A) Rated Current (A) Electrical Inductance: Measured at 1KHz with no DC current. Tolerance: 10% over entire inductance range. Available in tighter tolerances. Current Rating: Based on Inductance drop of < 10% of Initial value. Operating Temp: -55ºC to +125ºC Test Procedures: L measured on CH-100 @ 1KHz DCR measured on CH-301. Physical Packaging: 200 pieces per bag. 1k pieces per tape & reel Marking: EIA Inductance Code. APC20-3R9K-RC APC20-4R7K-RC APC20-5R6K-RC APC20-6R8K-RC APC20-8R2K-RC APC20-100K-RC APC20-120K-RC APC20-150K-RC APC20-180K-RC APC20-220K-RC APC20-270K-RC APC20-330K-RC APC20-390K-RC APC20-470K-RC APC20-560K-RC APC20-680K-RC APC20-820K-RC APC20-101K-RC APC20-121K-RC APC20-151K-RC APC20-181K-RC APC20-221K-RC APC20-271K-RC APC20-331K-RC APC20-391K-RC APC20-471K-RC APC20-561K-RC APC20-681K-RC APC20-821K-RC APC20-102K-RC APC20-122K-RC APC20-152K-RC APC20-182K-RC APC20-222K-RC APC20-272K-RC APC20-332K-RC APC20-392K-RC APC20-472K-RC APC20-562K-RC APC20-682K-RC APC20-822K-RC APC20-103K-RC APC20-123K-RC APC20-153K-RC APC20-183K-RC 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10000 12000 15000 18000 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 0.019 0.022 0.024 0.026 0.028 0.033 0.037 0.040 0.044 0.050 0.056 0.076 0.094 0.109 0.140 0.131 0.152 0.208 0.283 0.340 0.362 0.430 0.557 0.665 0.772 1.15 1.27 1.61 1.96 2.30 2.65 3.45 4.03 4.48 5.40 6.56 8.63 9.66 13.9 16.3 20.8 26.4 29.9 42.5 48.3 7.30 6.30 5.60 5.30 4.50 4.10 3.60 3.30 3.00 2.70 2.50 2.20 2.00 1.80 1.70 1.50 1.40 1.20 1.10 1.00 0.95 0.86 0.77 0.70 0.64 0.59 0.54 0.49 0.44 0.40 0.35 0.33 0.29 0.27 0.24 0.22 0.20 0.18 0.166 0.151 0.136 0.125 0.110 0.098 0.091 1.280 1.280 1.280 1.280 1.280 1.280 1.280 1.280 1.280 1.280 1.280 1.008 0.804 0.804 0.804 0.804 0.804 0.632 0.508 0.508 0.508 0.508 0.400 0.400 0.400 0.315 0.315 0.250 0.200 0.200 0.200 0.158 0.158 0.158 0.125 0.125 0.100 0.100 0.082 0.082 0.065 0.050 0.050 0.039 0.039 All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 08/09/08 www.alliedcomponents.com