APC30-5R6K-RC

RoHS Axial Power Chokes APC30 Dimensions: Inches (mm) 20 AWG 1.15 NOMINAL (29) 0.92 (23.37) 1.15 NOMINAL (29) 0.47 (11.94) Allied Part Number Inductance (µh) Tolerance (%) DCR Max. (Ω) Saturation Current (A) Rated Current (A) Features • Axial pre-tinned leads. • P rotected with UL shrink tubing. • Non standard values and tolerances available. • High saturation core material used for high inductance and low DCR. Electrical Inductance: Measured at 1KHz with no DC current. Tolerance: 10% over entire inductance range. Available in tighter tolerances. Current Rating: Based on Inductance drop of < 10% of Initial value. Operating Temp: -55ºC to + 125ºC Test Procedures: L measured on CH-100 @ 1KHz DCR measured on CH-301. Physical Packaging: 200 pieces per tape and reel. 50 pieces per bag Marking: EIA Inductance Code. For Tape and Reel packaging please add ”-TR” to the part number. APC30-3R9K-RC APC30-4R7K-RC APC30-5R6K-RC APC30-6R8K-RC APC30-8R2K-RC APC30-100K-RC APC30-120K-RC APC30-150K-RC APC30-180K-RC APC30-220K-RC APC30-270K-RC APC30-330K-RC APC30-390K-RC APC30-470K-RC APC30-560K-RC APC30-680K-RC APC30-820K-RC APC30-101K-RC APC30-121K-RC APC30-151K-RC APC30-181K-RC APC30-221K-RC APC30-271K-RC APC30-331K-RC APC30-391K-RC APC30-471K-RC APC30-561K-RC APC30-681K-RC APC30-821K-RC APC30-102K-RC APC30-122K-RC APC30-152K-RC APC30-182K-RC APC30-222K-RC APC30-272K-RC APC30-332K-RC APC30-392K-RC APC30-472K-RC APC30-562K-RC APC30-682K-RC APC30-822K-RC APC30-103K-RC APC30-123K-RC APC30-153K-RC APC30-183K-RC APC30-223K-RC APC30-273K-RC APC30-333K-RC APC30-393K-RC APC30-473K-RC APC30-563K-RC APC30-683K-RC APC30-823K-RC APC30-104K-RC 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10000 12000 15000 18000 22000 27000 33000 39000 47000 56000 68000 82000 100000 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 .007 .008 .011 .011 .013 .017 .019 .022 .023 .026 .027 .032 .033 .035 .037 .047 .060 .090 .113 .129 .150 .162 .202 .212 .281 .380 .420 .548 .665 .884 1.04 1.18 1.56 2.00 2.06 2.63 2.75 3.19 3.92 5.69 6.32 7.30 9.99 11.2 15.2 16.8 18.6 26.7 29.0 31.8 42.6 46.9 64.9 71.7 15.5 13.9 12.6 11.6 9.89 8.70 8.21 7.34 6.64 6.07 5.36 4.82 4.36 3.98 3.66 3.31 3.10 2.79 2.54 2.22 1.98 1.89 1.63 1.51 1.39 1.24 1.17 1.05 0.97 0.87 0.79 0.70 0.64 0.58 0.53 0.47 0.43 0.39 .359 .322 .293 .266 .257 .230 .210 .190 .171 .155 .143 .131 .119 .108 .098 .089 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 3.20 2.50 2.00 1.60 1.60 1.60 1.60 1.60 1.60 1.60 1.60 1.20 1.00 1.00 0.80 0.80 0.60 0.60 0.60 0.50 0.40 0.40 0.40 0.40 .315 .250 .250 .250 .160 .160 .130 .130 .130 .100 .100 .100 .083 .083 .067 .067 All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 09/23/10 www.alliedcomponents.com