CLC02-2N2_-RC

RoHS CLC02 0.039±0.004 (1.0±0.10) Ceramic Core Laser Cut Chip Inductor 0.020±0.004 (0.50±0.10) Dimensions: Inches (mm) 0.020±0.004 (0.50±0.10) 0.008±0.004 (0.20±0.10) 0.020 (0.50) 0.022 (0.55) Features • • • • • • 0402 EIA Size Available in 2% Tolerance High Self Resonant Frequencies Stable Performance at High Frequencies Suitable for Flow and Reflow Soldering Non-Magnetic core assures excellent thermal stability and batch consistency Allied Part Number Inductance A v a i l a b l e (nh) Tolerances @100 MHz * S e e B e l o w Q Min. Q Typical @800MHz SRF Typical (MHz) DCR Max. (Ω) IDC Max. (mA) CLC02-1N0_-RC CLC02-1N2_-RC CLC02-1N5_-RC CLC02-1N8_-RC CLC02-2N2_-RC CLC02-2N7_-RC CLC02-3N3_-RC CLC02-3N9_-RC 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 S, B S, B S, B S, B S, B S, B S, B S, B S, B S, B J, B J, B J, G J, G J, G J, G J, G J, G J, G J, G J, G J, G J, G J, G J, G 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 21 21 21 21 21 21 21 20 20 20 19 19 19 19 19 19 19 19 18 18 17 17 15 15 14 6000 6000 6000 6000 6000 5500 5500 5200 4800 4600 4000 3500 2800 2800 2500 2200 2000 1800 1800 1800 1800 1500 1500 1400 1200 0.05 0.06 0.07 0.08 0.09 0.10 0.12 0.15 0.17 0.19 0.30 0.35 0.41 0.45 0.60 0.70 0.80 1.20 1.40 1.70 2.10 2.50 4.00 4.50 5.50 400 400 400 400 400 400 400 360 360 340 320 320 320 320 240 240 200 200 170 150 140 130 120 110 90 Electrical Inductance range: 1.0nh to 100nh Tolerance: see table for tolerance options Test Frequency: 100MHz Operating Temperature: -40ºC-100ºC IDC: Based on 15ºC temperature rise @ 25ºC Ambient. CLC02-4N7_-RC CLC02-5N6_-RC CLC02-6N8_-RC CLC02-8N2_-RC CLC02-10N_-RC CLC02-12N_-RC CLC02-15N_-RC CLC02-18N_-RC CLC02-22N_-RC CLC02-27N_-RC CLC02-33N_-RC CLC02-39N_-RC CLC02-47N_-RC CLC02-56N_-RC CLC02-68N_-RC CLC02-82N_-RC CLC02-R10_-RC Test Equipment (L/Q): HP4291B Impedance Analyzer with HP16192 Fixture (SRF): HP8753E Network Analyzer (RDC): HP4338 Millihohm meter Physical Packaging: 10000 pieces per 7 inch reel. Marking: N /A * Please complete the part number with your required tolerance, S= ±0.3nH, B= ± 0.2nH, J= ±5%, G= ±2% All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL 11/12/10 www.alliedcomponents.com