FC05-4R7K-RC

RoHS FC05 Ferrite Core Chip Inductors Dimensions: Inches (mm) Terminal wrap around: 0.15 mm min. Both Ends Allied Part Number FC05-R12K-RC FC05-R15K-RC FC05-R18K-RC FC05-R22K-RC FC05-R27K-RC FC05-R33K-RC FC05-R39K-RC FC05-R47K-RC FC05-R56K-RC FC05-R68K-RC FC05-R82K-RC FC05-1R0K-RC FC05-1R2K-RC FC05-1R5K-RC FC05-1R8K-RC FC05-2R2K-RC FC05-2R7K-RC FC05-3R3K-RC FC05-3R9K-RC FC05-4R7K-RC FC05-5R6K-RC FC05-6R8K-RC FC05-8R2K-RC FC05-100K-RC FC05-120K-RC FC05-150K-RC FC05-180K-RC FC05-220K-RC FC05-270K-RC FC05-330K-RC Inductance (µh) 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.00 1.20 1.50 1.80 2.20 2.70 3.30 3.90 4.70 5.60 6.80 8.20 10.0 12.0 15.0 18.0 22.0 27.0 33.0 Tolerance (%) 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Q Min. 25 25 25 25 25 25 25 25 25 25 25 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 Test Freq. (MHz) 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 25.2 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 2.52 SRF Min. (MHz) 500 450 410 350 280 235 210 170 150 140 130 115 95 85 80 75 70 60 55 45 40 36 33 30 25 23 21 20 18 17 DCR Max. (Ω ) 0.20 0.25 0.30 0.35 0.40 0.45 0.50 0.55 0.60 0.70 0.75 0.80 0.90 1.05 1.20 1.40 1.60 1.80 2.00 2.40 2.70 3.20 3.60 4.50 5.70 6.50 7.00 8.00 9.00 10.0 IDC (mA) 600 600 570 550 530 510 490 470 450 420 400 350 325 300 270 250 230 210 190 170 150 140 120 110 105 90 85 78 75 70 Features • • • • • • Ferrite core for broader inductance range Accurate dimensions for auto insertion Low DCR for Low Loss Applications Excellent Solderability Characteristics Highly resistant to mechanical forces Excellent reliability in temperature and climate change Electrical Inductance Range: .12 µh to 33µh Tolerance: 10% across entire range, also available in 5%. Test Frequency: (L/Q) as specified, test OSC @ 200mV Operating Temp. Range: -25ºC ~ 85ºC IDC: Inductance drop 10% Typ. from original value with no current. Resistance to Solder Heat Test Method: Reflow solder the device onto PCB ii ll Peak Temp: 260ºC ± for 10 sec. Solder Composition: Sn/Ag3.0/Cu0.5 Test time: 6 minutes Test Equipment After soldering, After soldering, (L/Q): HP4191A RF Impedance Analyzer -6° C. push l0l0 tohen Hwa 10 -6° C. (DCR): 2000) x 10 push toC 2000) x 502BC (SRF): HP4291A RF Impedance Analyzer (IDC): HP4284A with HP42841A Physical Packaging: 2000 pieces per 7 inch reel Marking: Three Dot Color Code All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 12/11/08 www.alliedcomponents.com