FCHC10-330K-RC

RoHS FCHC10 Ferrite Core Chip Inductors High Current Dimensions: Inches (mm) Terminal wrap around: 0.15 mm min. Both Ends Allied Part Number FCHC10-1R0K-RC FCHC10-1R2K-RC FCHC10-1R5K-RC FCHC10-2R2K-RC FCHC10-3R3K-RC FCHC10-4R7K-RC FCHC10-6R8K-RC FCHC10-100K-RC FCHC10-150K-RC FCHC10-220K-RC FCHC10-330K-RC Inductance Tolerance (µh) (%) Q Min. L,Q Test Freq. (MHz) 7.96 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 SRF Min. (MHz) 300 280 270 140 95 90 68 45 40 25 25 DCR Max. (Ω ) .34 .40 .42 .50 .65 .80 1.0 1.5 2.2 2.7 4.5 IDC (mA) Features • Designed for higher curent applications • Accurate and consistent dimensions for auto insertion. • Highly resistant to mechanical forces • Excellent reliability in temperature and climate change • Excellent Solderability Characteristics 1.0 1.2 1.5 2.2 3.3 4.7 6.8 10 15 22 33 10 10 10 10 10 10 10 10 10 10 10 25 25 25 25 25 25 25 20 20 20 20 1500 1400 1400 1200 1000 800 730 700 500 470 400 Electrical Inductance Range: 1.0 µh to 47µh Tolerance: 10% across entire range, also available in 5%. Test Frequency: (L/Q) as specified, test OSC @ 200mV Operating Temp. Range: -25ºC ~ 85ºC IDC: Inductance drop 10% Typ. from original value with no current. Resistance to Solder Heat Test Method: Reflow solder the device onto PCB i l Peak Temp: 260ºC ± for 10 sec. Solder Composition: Sn/Ag3.0/Cu0.5 Test time: 6 minutes Test Equipment FCHC10-470K-RC 47 10 16 2.52 20 8.0 300 All specifications subject to change without notice. After soldering, (L & Q): HP4191A / HP4285A (DCR): C 2000) x 502BC push l0 tohen Hwa 10 -6° C. (SRF): HP4291A / HP8753D RF Impedance Analyzer (IDC): HP4284A with HP42841A Physical Packaging: 2000 pieces per 7 inch reel Marking: Three Dot Color Code 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 12/11/08 www.alliedcomponents.com