HFCLR03-82N_-RC

RoHS HFCLR03 0.039±0.004 (1.0±0.10) High Frequency Low Resistance Inductor 0.020±0.004 (0.5±0.10) Dimensions: Inches (mm) 0.020±0.004 (0.51±0.10) 0.010±0.004 (0.25±0.10) 0.016 (0.41) 0.016 (0.41) Features • 0402 EIA size for high board density applications. • Excellent Q and SRF characteristics for high frequency applications. • Cost effective monolithic construction Electrical Inductance range: .3nh to 82nh Tolerance: use S for ± .3nh, J for 5%, K for 10% Test Frequency: Inductance and Q tested at 100MHz, 200mv with HP4291A Impedance Analyzer Inductance vs Freq. Characteristics measured on HP4291A Q vs Frequency Characteristics measured on HP4291A SRF measured on HPE4991 & HP87530 DCR measured on Chen Hwa CH502BC or HP4338B Mechanical Operating Temperature: -55ºC-125ºC Storage Temperature: -55ºC to +125ºC after mounting to PCB, -5ºC to +40ºC @ 40% to 70% humidity before mounting to PCB Solderability: 90% terminal coverage Test Condition: Pre heat:150ºC. 1min. Solder composition: Sn/Ag3.0/Cu.0.5 (Pb free) Solder temp: 245ºC±5ºC (pb Free) Immersion time: 4 ± 1 sec. Resistance to solder heat: No damage to part Test Condition Pre heat: 150ºC. 1min. Solder composition: Sn/Ag3.0/Cu.0.5 (Pb free) Solder temp: 260ºC±5ºC (pb Free) Immersion time: 10 ± 1 sec. Physical Packaging: 10000 pieces per 7 inch reel. Allied Part Number Inductance (nh) @100MHz Tolerance (%) Q Min. SRF Typical (MHz) RDC Max. (Ω) IDC Max. (mA) HFCLR03-0N3S-RC HFCLR03-0N5S-RC HFCLR03-0N8S-RC HFCLR03-1N0S-RC HFCLR03-1N1S-RC HFCLR03-1N2S-RC HFCLR03-1N3S-RC HFCLR03-1N5S-RC HFCLR03-1N6S-RC HFCLR03-1N8S-RC HFCLR03-2N0S-RC HFCLR03-2N2S-RC HFCLR03-2N4S-RC HFCLR03-2N7S-RC HFCLR03-3N0S-RC HFCLR03-3N3S-RC HFCLR03-3N6S-RC HFCLR03-3N9S-RC HFCLR03-4N3S-RC HFCLR03-4N7S-RC HFCLR03-5N1S-RC HFCLR03-5N6S-RC HFCLR03-6N2S-RC HFCLR03-6N8_-RC HFCLR03-7N5_-RC HFCLR03-8N2_-RC HFCLR03-9N1_-RC HFCLR03-10N_-RC HFCLR03-12N_-RC HFCLR03-15N_-RC HFCLR03-18N_-RC HFCLR03-22N_-RC HFCLR03-27N_-RC HFCLR03-33N_-RC HFCLR03-39N_-RC HFCLR03-47N_-RC HFCLR03-56N_-RC HFCLR03-68N_-RC HFCLR03-82N_-RC 0.3 0.5 0.8 1.0 1.1 1.2 1.3 1.5 1.6 1.8 2.0 2.2 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 12 15 18 22 27 33 39 47 56 68 82 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 0.3nH 5, 10 5, 10 5, 10 5, 10 5, 10 5, 10 5, 10 5, 10 5, 10 5, 10 5, 10 5, 10 5, 10 5, 10 5, 10 5, 10 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 10000 10000 10000 10000 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 5300 4500 4500 4500 4200 3700 3400 3400 3000 2500 2200 1900 1700 1600 1200 1000 800 800 700 0.05 0.06 0.06 0.07 0.09 0.09 0.09 0.10 0.10 0.10 0.10 0.12 0.15 0.15 0.17 0.17 0.18 0.18 0.18 0.18 0.20 0.20 0.22 0.24 0.24 0.24 0.26 0.26 0.28 0.32 0.36 0.42 0.46 0.58 0.65 0.72 0.82 0.92 1.20 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 200 200 200 200 180 150 All specifications subject to change without notice. Note: Insert desired tolerance here “_” Tolerance Values J= ±5%, K= ±10% 714-665-1140 ALLIED COMPONENTS INTERNATIONAL 05/20/10 www.alliedcomponents.com