LRC30-1R5M-RC

RoHS LRC30 0.177±0.012 (4.50±0.30) 0.126±0.008 (3.20±0.20) 0.142±0.008 (3.61±0.20) 0.126±0.008 (3.20±0.20) Low Resistance Chip Inductors 0.102±0.008 (2.59±0.20) Dimensions: Inches (mm) 0.177±0.012 (4.50±0.30) 0.098 (2.49) 0.118 (3.00) 0.059 (1.50) 0.059 (1.50) 0.059 (1.50) Features • Miniature SMT wire-wound open magnetic path construction inductors with low DCR, high current capacity and high impedance characteristics. • Excellent solder heat resistance for flow and reflow soldering methods. • Excellent for use as choke coils in DC/DC converter and DC power supply circuits. Electrical Inductance Range: 1 .0 µ h to 1500µh Tolerance: For 20% use M, 10% use K and 5% use J as part number suffix. Available in tighter tolerances. Test Frequency: Inductance measured at 1MHz for all values. Except 560µh thru 1500µh, which are tested at 1 KHz. Operating Temp. Range: i-40° to +85 Rated Current: Based on Temperature rise not to exceed 35ºC. Inductance Drop 10% typical. Resistance to Soldering Heat: Pre heat: 150ºC ± 10ºC / 1-2 min. Solder temp: 260ºC ± 5ºC for 10 sec. ± 1 sec. Physical Packaging: 500 pieces per 7 inch reel. 2500 pieces per 13 inch reel. ll Allied Part Number LRC30-1R0M-RC LRC30-1R5M-RC LRC30-2R2M-RC LRC30-3R3M-RC LRC30-4R7K-RC LRC30-6R8K-RC LRC30-100K-RC LRC30-150K-RC LRC30-220K-RC LRC30-330K-RC LRC30-470K-RC LRC30-680K-RC LRC30-101K-RC LRC30-151K-RC LRC30-221K-RC LRC30-331K-RC LRC30-471K-RC LRC30-561K-RC LRC30-681K-RC LRC30-821K-RC LRC30-102K-RC LRC30-152K-RC Inductance (µh) Tolerance (%) Test Freq. (MHz) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 .001 .001 .001 .001 .001 SRF Min. (MHz) 100 85 60 47 35 30 23 20 15 12 10 8.4 6.8 5.5 4.5 3.6 3.0 2.5 2.2 2.0 2.0 1.8 DCR Max. (Ω) 0.08 0.09 0.11 0.13 0.15 0.20 0.24 0.32 0.60 1.00 1.10 1.70 2.20 3.50 4.00 6.80 8.50 10.4 14.7 20.0 27.9 35.0 Rated Current (mA) 1080 1000 900 800 750 720 650 570 420 310 280 220 190 130 110 100 90 80 70 60 50 40 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 560 680 820 1000 1500 20 20 20 20 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL Revised 05-14-10 www.alliedcomponents.com