LRC40-1R5M-RC

RoHS Low Resistance Chip Inductors Dimensions: Inches (mm) 0.224±0.012 (5.69±0.30) 0.197±0.012 (5.00±0.30) LRC40 0.185±0.012 (4.70±0.30) 0.197±0.012 (5.00±0.30) 0.197±0.012 (5.00±0.30) 0.224±0.012 (5.69±0.30) 0.138 (3.51) 0.079 (2.01) 0.118 (3.00) Allied Part Number LRC40-R12M-RC LRC40-R27M-RC LRC40-R47M-RC LRC40-1R0M-RC LRC40-1R5M-RC LRC40-2R2M-RC LRC40-3R3M-RC LRC40-4R7M-RC LRC40-6R8M-RC LRC40-100K-RC LRC40-150K-RC LRC40-220K-RC LRC40-330K-RC LRC40-470K-RC LRC40-680K-RC LRC40-101K-RC LRC40-151K-RC LRC40-221K-RC LRC40-331K-RC LRC40-471K-RC LRC40-681K-RC LRC40-102K-RC LRC40-222K-RC LRC40-472K-RC LRC40-103K-RC Inductance (µh) Tolerance (%) Test Freq. (MHz) 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 .10 .10 .10 .10 .10 .10 .01 .01 .01 .01 SRF Min. (MHz) 450 300 200 150 110 80 40 30 25 20 17 15 12 10 7.6 6.5 5.0 4.0 3.1 2.4 1.9 1.7 1.2 0.8 0.5 DCR Max. (Ω ) 0.098 0.014 .0182 0.027 0.031 0.041 0.050 .0574 0.104 0.130 0.210 0.266 0.448 0.560 0.938 1.204 2.660 3.360 6.160 7.560 11.34 14.42 30.10 61.04 140.0 Rated Current (A) 6.0 5.3 4.8 4.0 3.7 3.2 2.9 2.7 2.0 1.7 1.4 1.2 0.9 0.8 0.64 0.56 0.42 0.32 0.27 0.24 0.19 0.15 0.10 0.07 0.05 Features • SMT chokes which have low DCR, high current capacity and high inductance values. • Excellent for use as choke coils in DC/ DC converts and DC power supply circuits. • Open magnetic path construction. • Inductance values up to 1000µh. • Excellent solder heat resistance flow and reflow soldering methods. Electrical Inductance Range: .12µ h to 10000µ h. Tolerance: For 20% use M, 10% use K Test Frequency: .12µh to .68µh measured at 1MHz, 100µh to 680µh measured at .1MHz, 1000µh to 10,000µh measured at .01MHz. Operating Temp. Range: i-25° to +85° C.ll .12 .27 .47 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 680 1000 2200 4700 10000 20 20 20 20 20 20 20 20 20 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 Physical Packaging: 1,000 pieces per 13 inch reel. Available in tighter tolerances. All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL Revised 04-01-08 www.alliedcomponents.com