LS05-4R7J-RC

RoHS LS05 Ferrite Core Chip Inductors Dimensions: Inches (mm) 0.040 (1.02) 0.020 (0.5) 0.068 (1.72) 0.094 (2.4) 0.020 (0.5) 0.050 (1.27) Terminal wrap around: 0.15 mm min. Both Ends 0.028 (0.7) 0.030 (0.76) 0.070 (1.78) 0.060 (1.52) 0.040 (1.02) Features • • • • • 0805 SMD for Auto Insertion Low DCR for Low Loss Applications Excellent Solderability Characteristics High resistant to mechanical forces Excellent reliability in temperature and climate change Electrical Inductance Range: .078uh to 47uh Tolerance: 5% Across entire range also available in 10% and 20%. Test Frequency: (L/Q) .078uh to 6.8uh tested at 7.9Mhz @ 200mv 8.2uh to 47uh tested at 2.5MHz @ 200mv. Operating Temp: - 25ºC ~ 85ºC IDC: Inductance drop 10% Typ. from original value with no current. Resistance to Soldering Heat Pre-Heat 150ºC, 1 minute. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC peak for 10 sec. Test Time: 6 minutes. Test Equipment (L/Q): HP4286A/HP4287A/Agilent E4991A (DCR): Chen Hwa 502BC (SRF): HP8753D/Agilent E4991 : (IDC):HP4284A with HP42841A/HP4285A with HP42841A Physical Packaging: 2000 pieces per 7inch reel. Marking: Single Dot Color Code. Allied Part Number LS05-78NJ-RC LS05-90NJ-RC LS05-R11J-RC LS05-R47J-RC LS05-R68J-RC LS05-1R0J-RC LS05-1R2J-RC LS05-1R5J-RC LS05-1R8J-RC LS05-2R2J-RC LS05-2R7J-RC LS05-3R3J-RC LS05-3R9J-RC LS05-4R7J-RC LS05-5R6J-RC LS05-6R8J-RC LS05-8R2J-RC LS05-100J-RC LS05-120J-RC LS05-150J-RC LS05-180J-RC LS05-220J-RC LS05-270J-RC LS05-470J-RC Inductance (uH) .078 .090 .110 .470 .680 1.00 1.20 1.50 1.80 2.20 2.70 3.30 3.90 4.70 5.60 6.80 8.20 10.0 12.0 15.0 18.0 22.0 27.0 47.0 Tolerance (%) 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Q TYP. Test Freq. (MHz) 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 SRF Min. (MHz) 1440 1200 1200 480 480 400 330 330 300 250 200 160 90 70 65 45 45 40 38 35 25 20 19 15 DCR Max. (Ω ) 0.06 0.07 0.07 0.40 0.40 0.69 0.83 0.83 1.00 1.10 1.25 1.45 1.50 1.60 1.70 1.95 2.10 2.40 3.20 3.55 4.90 5.45 7.80 14.5 IDC (mA) 19 19 19 19 20 20 20 20 20 20 23 23 23 20 20 20 16 16 16 16 16 16 16 16 2000 2000 2000 800 800 700 700 700 650 650 650 650 600 530 500 470 450 400 360 350 300 270 240 180 All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 12/30/08 www.alliedcomponents.com