LS10-6R8J-RC

RoHS LS10 0.60 (1.52) 0.20 (0.51) 0.10 (2.5) Ferrite Core Chip Inductors Dimensions: Inches (mm) 0.20 (0.51) 0.08 (2.03) Terminal wrap around: 0.15 mm min. Both Ends 0.028 (0.70) 0.05 (1.27) 0.10 (2.54) 0.118 (2.99) 0.09 (2.2) 0.04 (1.02) Allied Part Number LS10-1R2J-RC LS10-1R5J-RC LS10-1R8J-RC LS10-2R2J-RC LS10-2R7J-RC LS10-3R3J-RC LS10-3R9J-RC LS10-4R7J-RC LS10-5R6J-RC LS10-6R8J-RC LS10-8R2J-RC LS10-100J-RC LS10-150J-RC Inductance (µh) 1.20 1.50 1.80 2.20 2.70 3.30 3.90 4.70 5.60 6.80 8.20 10.0 15.0 Tolerance (%) 5 5 5 5 5 5 5 5 5 5 5 5 5 Q Typ. (L) Test Freq. (MHz) 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 SRF Min. (MHz) 350 300 280 250 200 200 170 130 110 105 90 85 38 DCR Max. (Ω ) 0.50 0.65 0.75 0.90 1.00 1.15 1.25 1.35 1.45 1.60 1.80 2.40 2.40 IDC Current (mA) 1200 1200 1050 950 950 900 850 800 700 600 550 500 450 Features • 1008 SMD for Auto Insertion • Low DCR for Low Loss Applications • Excellent Solderability Characteristics • Highly resistant to mechanical forces • Excellent reliabiltiy in temperature and climate change 55 58 54 48 51 58 37 37 36 33 40 40 35 Electrical Inductance Range: 1.2µh to 15µh Tolerance: 5% across entire range. Also available in 10% and 20%. Test Frequency: (L) entire range @ 7.96Mhz @ 200mv (Q) from 1.2µh to 3.3µh @ 50Mhz, from 3.9µh to 15µh @ 7.9Mhz Operating Temp. Range: -25ºC ~ 85ºC IDC: Inductance drop 10% Typ. from i l original value with no current Resistance to Solder Heat Pre-Heat 150ºC, 1 minute Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp. 260ºC peakAfter soldering, for 10 sec. Test time: 6 minutes -6 push l0 to 2000) x 10 ° C. Test Equipment (L/Q): HP4286A / HP4287A /Agilent E4991A (DCR): Chen Hwa 502BC (SRF): HP8753D / Agilent E4991 (IDC): HP4284A with HP42841A / HP4285A with HP42841A Physical Packaging: 2000 pieces per 7 inch reel Marking: 3 Dot Color Code Available in tighter tolerances. All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 12/11/08 www.alliedcomponents.com