MLB03-331-RC

RoHS Multilayer Ferrite Beads MLB03 0.039±0.004 (1.0±0.10) 0.020±0.004 (0.50±0.10) Dimensions: Inches (mm) 0.020±0.004 (0.50±0.10) 0.010±0.004 (0.25±0.10) 0.016 (0.40) 0.016 (0.40) 0.018 (0.46) Allied Part Number MLB03-060-RC MLB03-100-RC MLB03-300-RC MLB03-330-RC MLB03-400-RC MLB03-470-RC MLB03-600-RC MLB03-700-RC MLB03-750-RC MLB03-800-RC MLB03-900-RC MLB03-101-RC MLB03-121-RC MLB03-151-RC MLB03-221-RC MLB03-241-RC MLB03-301-RC MLB03-331-RC MLB03-481-RC Impedance (Ω) @ 100 MHz +/- 25% 6 10 30 33 40 47 60 70 75 80 90 100 120 150 220 240 300 330 480 DC Resistance (Ω ) Max. 0.05 0.05 0.30 0.30 0.30 0.40 0.40 0.40 0.40 0.40 0.50 0.50 0.50 0.50 0.50 0.50 0.80 0.80 0.80 *Rated Current (mA) 500 500 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 100 60 Features • • • • Surface mount EMI suppression components Nickel barrier termination for excellent resistance to solder heat Multi layer technology Flow and reflow soldering Electrical Impedance Range: 6Ω to 1500Ω Tolerance: 25% over entire range Operating Range: -55ºC ~ +125ºC Storage Temp: Under 25ºC at 40~60% Humidity Rated Current: Based on temp rise not to exceed 30ºC Resistance to Solder Heat Pre-Heat 150ºC, 1 minute Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260±5ºC for 10sec ±1 sec. Minimum of 75% of Electrode covered with new solder. Impedance within 30% of initial value. 1.00 600 MLB03-601-RC 1.50 1000 MLB03-102-RC 2.00 1500 MLB03-152-RC *Temperature rise ∆T=30ºC at rated current. All specifications subject to change without notice. Test Equipment (Z): HP4291A RF Impedance/Material Analyzer (RDC): Chen Hwa 502BC Physical Packaging: 10000 per 7 inch reel. Marking: None 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 6/18/09 www.alliedcomponents.com