MLB05-122-RC

RoHS Multilayer Ferrite Beads MLB05 0.063±0.006 (1.60±0.15) 0.031±0.006 (0.8±0.15) Dimensions: Inches (mm) 0.031±0.006 (0.8±0.15) 0.012±0.008 (0.3±0.20) 0.024 (0.6) 0.031 (0.8) 0.041 (1.04) Allied Part Number Impedance (Ω) @ 100 MHz +/- 25% DC Resistance (Ω ) Max. *Rated Current (mA) 500 500 500 500 500 500 500 500 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 300 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 50 50 50 50 50 50 50 Features • • • • Surface mount EMI suppression components Nickel barrier termination for excellent resistance to solder heat Multi layer technology Flow and reflow soldering 0.05 5 MLB05-050-RC 0.05 6 MLB05-060-RC 0.05 7 MLB05-070-RC 0.05 10 MLB05-100-RC 0.05 11 MLB05-110-RC 0.08 15 MLB05-150-RC 0.08 17 MLB05-170-RC 0.08 19 MLB05-190-RC 0.10 20 MLB05-200-RC 0.10 22 MLB05-220-RC 0.10 25 MLB05-250-RC 0.10 26 MLB05-260-RC 0.10 30 MLB05-300-RC 0.10 31 MLB05-310-RC 0.10 32 MLB05-320-RC 0.10 33 MLB05-330-RC 0.10 40 MLB05-400-RC 0.10 47 MLB05-470-RC 0.10 50 MLB05-500-RC 0.10 52 MLB05-520-RC 0.10 55 MLB05-550-RC 0.10 56 MLB05-560-RC 0.10 60 MLB05-600-RC 0.15 68 MLB05-680-RC 0.15 70 MLB05-700-RC 0.15 75 MLB05-750-RC 0.15 80 MLB05-800-RC 0.20 90 MLB05-900-RC 0.20 100 MLB05-101-RC 0.25 120 MLB05-121-RC 0.25 140 MLB05-141-RC 0.30 150 MLB05-151-RC 0.30 181 MLB05-181-RC 200 0.30 MLB05-201-RC 0.30 220 MLB05-221-RC 0.40 240 MLB05-241-RC 0.40 300 MLB05-301-RC 330 0.50 MLB05-331-RC 0.50 400 MLB05-401-RC 0.50 420 MLB05-421-RC 0.50 450 MLB05-451-RC 0.50 470 MLB05-471-RC 0.50 500 MLB05-501-RC 0.50 600 MLB05-601-RC 0.70 750 MLB05-751-RC 0.70 800 MLB05-801-RC 0.70 1000 MLB05-102-RC 1.00 1200 MLB05-122-RC 1.00 1500 MLB05-152-RC 1.20 MLB05-172-RC 1700 1.20 2000 MLB05-202-RC 1.20 2200 MLB05-222-RC 1.30 2500 MLB05-252-RC 1.30 2700 MLB05-272-RC *Temperature rise ∆T= 30ºC at rated current. All specifications subject to change without notice. Electrical Impedance Range: 5Ω to 2700Ω Tolerance: 25% over entire range Operating Range: -55ºC ~ +125ºC Storage Temp: Under 25ºC at 40~60% Humidity Rated Current: Based on temp rise not to exceed 30ºC Resistance to Solder Heat Pre-Heat 150ºC, 1 minute Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260±5ºC for 10sec ±1 sec. Minimum of 75% of Electrode covered with new solder. Impedance within 30% of initial value. Test Equipment (Z): HP4291A RF Impedance/Material Analyzer (RDC): Chen Hwa 502BC Physical Packaging: 4000 per 7 inch reel. Marking: None 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 6/18/09 www.alliedcomponents.com