MLB10-241-RC

RoHS MLB10 MLB10 0.079±0.008 (2.0±0.20) 0.049±0.008 (1.25±0.20) Multilayer Ferrite Beads Dimensions: Inches (mm) 0.035±0.008 (0.9±0.20) 0.020±0.012 (0.5±0.30) D 0.039 (1.0) Allied Part Number MLB10-050-RC MLB10-070-RC MLB10-090-RC MLB10-100-RC MLB10-110-RC MLB10-120-RC MLB10-150-RC MLB10-170-RC MLB10-190-RC MLB10-220-RC MLB10-260-RC MLB10-280-RC MLB10-300-RC MLB10-310-RC MLB10-320-RC MLB10-330-RC MLB10-390-RC MLB10-400-RC MLB10-420-RC MLB10-470-RC MLB10-500-RC MLB10-520-RC MLB10-560-RC MLB10-600-RC MLB10-700-RC MLB10-750-RC MLB10-800-RC MLB10-900-RC MLB10-950-RC MLB10-101-RC MLB10-121-RC MLB10-151-RC MLB10-181-RC MLB10-201-RC MLB10-221-RC MLB10-241-RC MLB10-301-RC MLB10-331-RC MLB10-401-RC MLB10-421-RC MLB10-431-RC MLB10-451-RC MLB10-471-RC MLB10-501-RC MLB10-601-RC MLB10-681-RC MLB10-751-RC MLB10-102-RC MLB10-122-RC MLB10-152-RC MLB10-202-RC MLB10-222-RC MLB10-252-RC MLB10-272-RC Impedance (Ω ) @ 100 MHz +/- 25% 5 7 9 10 11 12 15 17 19 22 26 28 30 31 32 33 39 40 42 47 50 52 56 60 70 75 80 90 95 100 120 150 180 200 220 240 300 330 400 420 430 450 470 500 600 680 750 1000 1200 1500 2000 2200 2500 2700 DC Resistance (Ω ) Max. 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.25 0.25 0.25 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.40 0.40 0.40 0.40 0.40 0.40 0.50 0.50 0.60 0.60 0.70 0.70 0.70 0.70 ***Rated Current (mA) 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 500 500 500 500 500 500 500 500 500 500 500 500 500 500 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 200 200 200 200 200 200 200 200 0.047 (1.2) 0.045 (1.14) Features • • • • Surface mount EMI suppression components Nickel barrier termination for excellent resistance to solder heat Multi layer technology Flow and reflow soldering Electrical Impedance Range: 5Ω to 2700Ω Tolerance: 25% over entire range Operating Range: -55ºC ~ +125ºC Storage Temp: Under 25ºC at 40~60% Humidity Rated Current: Based on temp rise not to exceed 30ºC Resistance to Solder Heat Pre-Heat 150ºC, 1 minute Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260±5ºC for 10sec ±1 sec. Minimum of 75% of Electrode covered with new solder. Impedance within 30% of initial value. Test Equipment (Z): HP4291A RF Impedance/Material Analyzer (RDC): Chen Hwa 502BC Physical Packaging: 4000 per 7 inch reel. Marking: None ***Temperature rise shall not be more than 30°C at rated current. All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 6/18/09 www.alliedcomponents.com