MLBA20-601T-RC

RoHS Multilayer Bead Arrays Dimensions: Inches (mm) MLBA20 Allied Part Number Impedance (Z ) Tolerance (%) Test Freq. MHz, 200mV DCR Max. (Ω) Rated Current (mA)Max Features • Surface mount EMI components • Four lines in one chip for suppressing noise • Low profile • High denisty circuit design Electrical MLBA20-300T-RC MLBA20-600T-RC MLB2A0-800T-RC MLBA20-121T-RC MLBA20-151T-RC MLBA20-181T-RC MLBA20-221T-RC MLBA20-241T-RC MLBA20-301T-RC MLBA20-471T-RC MLBA20-601T-RC MLBA20-102T-RC 30 60 80 120 150 180 220 240 300 470 600 1000 30 30 30 30 30 30 30 30 30 30 30 30 100 100 100 100 100 100 100 100 100 100 100 100 .012 .012 .012 .012 .012 0.12 0.12 0.12 0.12 0.12 0.15 0.15 350 250 150 150 150 150 Inductance Range: 30ohm ~ 1000ohm Tolerance: 30% over entire range, tighter tolerances available. Operating Temp: -55ºC ~ +125ºC Rated Current: Based on temp rise not to exceed 30ºC. Resistance to Soldering Heat 150 150 150 Pre-Heat 150ºC, 1 Min. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC +/- 5ºC for 10 sec ± 1 sec. Test Equipment 100 100 50 Physical All specifications subject to change without notice. (Z): HP4291A RF IMPEDANCE/MATERIAL ANALYZER (RDC): CHEN HWA 502BC Packaging: 3000 pieces per 7 inch reel. Marking: None 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 12/11/08 15 www.alliedcomponents.com