MLC05-1R8M-RC

RoHS MLC05 Multilayer Chip Inductors Dimensions: Inches (mm) 0.063±0.008 (1.60±0.2) 0.031±.008 (0.80±0.2) 0.012±0.008 (0.30±0.20) 0.031±0.008 (0.80±0.2) .070~.079 (1.8~.2.0) .024~.032 (0.6~0.8) .028~.031 (0.7~0.8) Allied Part Number MLC05-R033M-RC MLC05-R047M-RC MLC05-R056M-RC MLC05-R068M-RC MLC05-R082M-RC MLC05-R10_-RC MLC05-R12_-RC MLC05-R15_-RC MLC05-R18_-RC MLC05-R22_-RC MLC05-R27_-RC MLC05-R33_-RC MLC05-R39_-RC MLC05-R47_-RC MLC05-R56_-RC MLC05-R68_-RC MLC05-R82_-RC MLC05-1R0_-RC MLC05-1R2_-RC MLC05-1R5_-RC MLC05-1R8_-RC MLC05-2R2_-RC MLC05-2R7_-RC MLC05-3R3_-RC MLC05-3R9_-RC MLC05-4R7_-RC MLC05-5R6_-RC MLC05-6R8_-RC MLC05-8R2_-RC MLC05-100_-RC MLC05-120_-RC MLC05-150_-RC MLC05-220_-RC Inductance (µh) Tolerance (%) Q Min. Test Freq. (MHz) SRF Min. (MHz) DCR Max. (Ω) IDC Max. (mA) M 15 50 270 0.20 50 M M M M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M K,M 15 15 15 15 25 25 25 25 25 25 25 25 25 25 25 25 35 35 35 35 35 35 35 35 35 35 35 30 30 30 20 20 50 50 50 50 25 25 25 25 25 25 25 25 25 25 25 25 10 10 10 10 10 10 10 10 10 4 4 4 2 2 1 1 260 255 250 245 240 205 180 165 150 136 125 110 105 95 85 75 65 60 55 50 45 40 38 36 33 22 20 18 17 15 14 11 0.30 0.30 0.30 0.30 0.50 0.50 0.60 0.60 0.80 0.80 0.85 1.00 1.35 1.50 1.70 2.10 0.60 0.80 0.80 0.95 1.10 1.30 1.50 1.70 2.10 1.50 1.70 2.10 2.55 2.60 1.50 1.70 50 50 50 50 50 50 50 50 50 50 35 35 35 35 35 35 25 25 25 25 15 15 15 15 15 5 5 5 5 3 1 1 * .033 .047 .056 .068 .082 .10 .12 .15 .18 .22 .27 .33 .39 .47 .56 .68 .82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 22 Features • 0603 EIA Size • MultiLayer Ferrite Construction • Closed Magnetic path for Shielding • Excellent Solderability Characteristics Electrical Inductance Range: .033µh to 22µh Tolerance: As noted, please indicate letter desired tolerance. Test Frequency: As noted. Operating Temp: -40ºC ~ 125ºC / -55ºC to +125ºC pending. Resistance to Solder Heat Pre-Heat: 150ºC, 1 minute. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC ±5ºC Immersion time: 10 ±1 sec. No Damage with more than 75% coverage. Inductance within 30% of initial value. Within 20% over 12µh. Test Equipment (L): HP4291A RF Impedance Analyzer or alternate. DCR: Chen Hwa 502BC or HP4338B or alternate. SRF: HP8753D / Agilent E4991A or alternate. IDC: HP4284A with HP42841A / HP4285A with HP42841A. Physical Packaging: 4000 pieces per 7 inch reel. *Please insert the letter for desired tolerance: K=10% M=20% All specifications subject to change without notice. 949-356-1780 ALLIED COMPONENTS INTERNATIONAL Revised 09/30/15 Marking: None www.alliedcomponents.com