MLC10-R10M-RC

RoHS MLC10 0.079±0.008 (2.01±0.20) Multilayer Chip Inductors 0.035±0.008 (0.89±0.20) * 0.049±0.008 (1.25±0.20) 0.020±0.012 (0.51±0.30) Dimensions: Inches (mm) 0.049±0.008 (1.25±0.20) 0.039 (0.99) 0.047 (1.19) 0.045 (1.14) Electrical Q vs. Frequency Characteristics: Measured on Impedance Analyzer HPA4195A. I n d u c t a n c e v s . Te m p e r a t u r e Characteristics: Measured on LCR Meter HP4285A. Impedance vs. Frequency Characteristics: Measured on Impedance Analyzer HPA4195A. Inductance Vs. DC Current Characteristics: Measured on LCR Meter HPA4285A. Tolerance: For 20% use M, 10% use K, and 5% use J as part number suffix. Mechanical Solderability: 90% terminal coverage. Preheat: 120 ± 20° C for 60 sec. Solder: H63A. Solder Temp.: 230 ± 5° C. Flux: rosin. Dip time: 4 ± 1 sec. Environmental Thermal Shock: Inductance shall be within ±5% of initial value. Q shall be within ± 30% of initial value within temp. range of -40 ° C to + 85° C for 30 min. each for > 100 cycles. Humidity Resistance: Same results as above. Temp. 4° C. Humidity: 95% RH. Time: 1000 hrs. High Temp Resistance: Same results as above. Temp: 85 ° C. Time: 1000 hrs. Low Temp Resistance: Same results as above. Temp: -45 ° C. Time: 1000 hrs. Operating Temp.: - 25 ° C to +85 ° C. Storage Temp.: - 40 ° C to +85 ° C. Physical Packaging: .022µH - 2.2µH, 4000 pieces per reel. 2.7µH - 27µH 3000 pieces per 7 inch reel. Allied Part Number Inductance Tolerance (%) (µ h) Q Min. Test Freq. (MHz) SRF Min. (MHz) DCR Max. (Ω ) IDC Max. (mA) MLC10-R022M-RC MLC10-R033M-RC MLC10-R047M-RC MLC10-R056M-RC MLC10-R068M-RC MLC10-R082M-RC MLC10-R10M-RC MLC10-R12M-RC MLC10-R15M-RC MLC10-R18M-RC MLC10-R22M-RC MLC10-R27M-RC MLC10-R33M-RC MLC10-R39M-RC MLC10-R47M-RC MLC10-R56M-RC MLC10-R68M-RC MLC10-R82M-RC MLC10-1R0K-RC MLC10-1R2K-RC MLC10-1R5K-RC MLC10-1R8K-RC MLC10-2R2K-RC MLC10-2R7K-RC * MLC10-3R3K-RC * MLC10-3R9K-RC * MLC10-4R7K-RC * MLC10-5R6K-RC * MLC10-6R8K-RC * MLC10-8R2K-RC * MLC10-100K-RC * MLC10-120K-RC * MLC10-150K-RC * MLC10-180K-RC * MLC10-220K-RC * MLC10-270K-RC * .022 .033 .047 .056 .068 .082 .10 .12 .15 .18 .22 .27 .33 .39 .47 .56 .68 .82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 20 20 20 20 20 20 25 25 25 25 25 25 25 25 25 25 25 25 45 45 45 45 45 45 45 45 45 45 45 45 45 45 30 30 30 30 50 50 50 50 50 50 25 25 25 25 25 25 25 25 25 25 25 25 10 10 10 10 10 10 10 10 10 4 4 4 2 2 1 1 1 1 320 320 320 320 280 255 235 220 200 185 170 150 145 135 125 115 105 100 75 65 60 55 50 45 41 38 35 32 29 26 24 22 19 18 16 13 0.20 0.20 0.20 0.20 0.20 0.20 0.30 0.30 0.40 0.40 0.50 0.50 0.55 0.65 0.65 0.75 0.80 1.00 0.40 0.50 0.50 0.60 0.65 0.75 0.80 0.90 1.00 0.90 1.00 1.10 1.10 1.20 0.80 0.90 1.10 1.25 300 300 300 300 300 300 250 250 250 250 250 250 250 250 250 150 150 150 50 50 50 50 30 30 30 30 30 15 15 15 15 15 5 5 5 5 *See dimensional difference. Available in tighter tolerances. All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 2/06/09 www.alliedcomponents.com