MLC20-3R3K-RC

RoHS Multilayer Chip Inductors 0.126±0.008 MLC20 0.043±0.008 (1.09±0.20) Dimensions: Inches (mm) (3.20±0.20) 0.063±0.008 (1.60±0.20) 0.043±0.008 (1.09±0.20) 0.047 (1.19) 0.078 (1.98) 0.054 (1.37) Allied Part Number Inductance Tolerance (µh) (%) Q Min. Test Freq. (MHz) SRF Min. (MHz) DCR Max. (Ω ) IDC Max. (mA) MLC20-R047M-RC MLC20-R056M-RC MLC20-R068M-RC MLC20-R082M-RC MLC20-R10M-RC MLC20-R12M-RC MLC20-R15M-RC MLC20-R18M-RC MLC20-R22M-RC MLC20-R27M-RC MLC20-R33M-RC MLC20-R39M-RC MLC20-R47M-RC MLC20-R56M-RC MLC20-R68M-RC MLC20-R82M-RC MLC20-1R0K-RC MLC20-1R2K-RC MLC20-1R5K-RC MLC20-1R8K-RC MLC20-2R2K-RC MLC20-2R7K-RC MLC20-3R3K-RC MLC20-3R9K-RC MLC20-4R7K-RC MLC20-5R6K-RC MLC20-6R8K-RC MLC20-8R2K-RC MLC20-100K-RC MLC20-120K-RC MLC20-150K-RC MLC20-180K-RC MLC20-220K-RC MLC20-270K-RC MLC20-330K-RC .047 .056 .068 .082 .10 .12 .15 .18 .22 .27 .33 .39 .47 .56 .68 .82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 20 20 20 20 25 25 25 25 25 25 25 25 25 25 25 25 45 45 45 45 45 45 45 45 45 45 45 45 45 45 35 35 35 35 35 50 50 50 50 25 25 25 25 25 25 25 25 25 25 25 25 10 10 10 10 10 10 10 10 10 4 4 4 2 2 1 1 1 1 0.4 320 280 280 250 235 220 200 185 170 150 145 135 125 115 105 100 75 65 60 55 50 45 41 38 35 32 29 26 24 22 19 18 16 14 13 0.15 0.25 0.25 0.25 0.25 0.30 0.30 0.40 0.40 0.50 0.60 0.50 0.60 0.70 0.80 0.90 0.40 0.50 0.50 0.50 0.60 0.60 0.70 0.80 0.90 0.70 0.80 0.90 1.00 1.00 0.70 0.75 0.90 0.90 1.05 300 300 300 300 250 250 250 250 250 250 250 200 200 150 150 100 100 100 80 70 60 60 60 50 50 25 25 25 25 15 5 5 5 5 5 Electrical Q vs. Frequency Characteristics: Measured on Impedance Analyzer HPA4195A. I n d u c t a n c e v s . Te m p e r a t u r e Characteristics: Measured on LCR Meter HP4285A. Impedance vs. Frequency Characteristics: Measured on Impedance Analyzer HP4195A. Inductance vs. DC Current Characteristics: Measured on LCR Meter HP42585A. Tolerance: For 20% use M, 10% use K and 5% use J as part number suffix. Mechanical Solderability: 90% terminal coverage. Preheat: 120 ± 20° C for 60 sec. Solder: H63A. Sloder Temp.: 230 ± 5° C. Flux: rosin. Dip Time: 4 ± 1 sec. Environmental Thermal Shock: Inductance shall be within ± 5% of of initial value. Q shall be within ± 30% of initial value within temp. range of -40° C to + 85° C for 30 min. each for >100 cycles. Humidity Resistance: Same results as above. Temp.: 40° C. Humidity: 95% RH. Time: 1000 hrs. High Temp. Resistance: Same results as above. Temp: 85° C. Time: 1000 hrs. Low Temp Resitance: Same results as above. Temp.: 40° C. Time: 1000 hrs. Operating Temp.: - 25 ° C to +85 ° C. Storage Temp.: - 40 ° C to +85 ° C. Physical Packaging: 3000 pieces per 7 inch reel. Available in tighter tolerances. All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL www.alliedcomponents.com