PC03011-8R2M-RC

RoHS Power Chip Inductors Dimensions: Inches (mm) PC03011 Allied Part Number Inductance (µh) Tolerance (%) Test Freq. KHz, 1V DCR Max. (Ω ) IDC (A) Features • Unshielded SMD low cost design • Designed for higher cuurent applications • Accurate and consistent dimensions for auto insertion • Excellent for use in DC-DC converter application • Also available in magnetically shielded PC03011-1R0M-RC PC03011-1R5M-RC PC03011-2R2M-RC PC03011-3R3M-RC PC03011-3R9M-RC PC03011-4R7M-RC PC03011-5R6M-RC PC03011-6R8M-RC PC03011-8R2M-RC PC03011-100M-RC PC03011-120M-RC PC03011-150M-RC PC03011-180M-RC PC03011-220M-RC PC03011-270M-RC PC03011-330M-RC PC03011-390M-RC PC03011-470M-RC PC03011-500M-RC PC03011-560M-RC PC03011-680M-RC PC03011-750M-RC PC03011-820M-RC 1.0 1.5 2.2 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 50 56 68 75 82 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 0.08 0.13 0.18 0.27 0.32 0.33 0.48 0.56 0.62 0.90 1.00 1.10 1.24 1.40 2.18 2.54 2.80 3.10 3.20 3.50 5.80 6.10 6.60 1.80 1.44 1.26 1.08 1.00 0.90 0.76 0.68 0.63 0.56 0.52 0.50 0.46 0.36 0.30 0.28 0.26 0.25 0.24 0.23 0.20 0.18 0.17 Electrical Inductance Range: 1.0µh to 82µh Tolerance: 20% over entire range Also available in tighter tolerances Test Frequency: (L/Q) as specified Operating Temp: -40ºC ~ +85ºC IDC: Current at which Inductance drops 10% of original value with a ∆ T= 40ºC whichever is lower. Resistance to Soldering Heat Test Method: Pre-Heat 150ºC, 1 Min. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC +/- 5ºC for 10 sec ± 1 sec. Test Equipment (L & Q): HP 4192A / HP4285A (DCR): Chen Hwa 502BC (IDC): HP4284A with HP42841A or CH1061 with CH301A Physical Packaging: 3000 pieces per 13 inch reel. Marking: 2 Character Alpha Code All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL 15 REVISED 1/14/09 www.alliedcomponents.com