PC03015-220M-RC

RoHS Power Chip Inductors Dimensions: Inches (mm) PC03015 Allied Part Number Inductance (µh) Tolerance (%) Test Freq. MHz, 1 V DCR (Ω ) IDC (A) Features • Unshielded SMD low cost design • Designed for higher current applications • Accurate and consistent dimensions for auto insertion • Excellent for use in DC-DC converter application • Also available in magnetically shielded PC03015-2R2M-RC PC03015-3R3M-RC PC03015-4R7M-RC PC03015-6R8M-RC PC03015-100M-RC PC03015-150M-RC PC03015-220M-RC PC03015-330M-RC PC03015-390M-RC PC03015-470M-RC PC03015-680M-RC PC03015-101M-RC PC03015-221M-RC PC03015-122M-RC PC03015-152M-RC 2.2 3.3 4.7 6.8 10 15 22 33 39 47 68 100 220 1200 1500 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0.10 0.11 0.15 0.20 0.30 0.58 0.71 1.10 1.30 1.30 2.20 3.50 10.92 38 55 0.79 0.73 0.65 0.77 Electrical 0.45 0.30 0.25 0.20 0.17 0.17 0.13 0.10 0.07 0.05 0.03 Test Equipment (L & Q): HP4192A Impedence Analyzer (DCR): Chen Hwa 502BC (IDC): HP4284A with HP42841A or CH1061 with CH301A Resistance to Soldering Heat Test Method: Pre-Heat 150ºC, 1 Min. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC +/- 5ºC for 10 sec ± 1 sec. Inductance Range: 2.2µh to 1500µh Tolerance: 20% over entire range Also available in tighter tolerances Test Frequency: (L/Q) as specified Operating Temp: -40ºC ~ +85ºC IDC: Current at which Inductance drops 10% of original value with a ∆ T= 40ºC whichever is lower. All specifications subject to change without notice. Physical Packaging: 3000 pieces per 13 inch reel. Marking: 2 Character Alpha Code 714-665-1140 ALLIED COMPONENTS INTERNATIONAL 15 REVISED 1/14/09 www.alliedcomponents.com