PCHC123H-R47M-RC

RoHS Power Choke High Current Inches (mm) PCHC123H Dimensions: Allied Part Number Inductance (µh) Tolerance (%) Test Freq. KHz,1v DCR (Ω) Max Isat (A) Irms (A) Max. Features • • • • • Magnetically shielded construction High saturation current up to 44A Expanded operating temp range Low DCR Suitable for pick and place PCHC123H-R47M-RC PCHC123H-R68M-RC PCHC123H-1R0M-RC PCHC123H-1R5M-RC PCHC123H-2R2M-RC PCHC123H-3R3M-RC PCHC123H-4R7M-RC PCHC123H-5R6M-RC PCHC123H-6R8M-RC PCHC123H-100M-RC 0.47 0.68 1.00 1.50 2.20 3.30 4.70 5.60 6.80 10 20 20 20 20 20 20 20 20 20 20 100 100 100 100 100 100 100 100 100 100 2 2.5 3.5 5.5 8 12 15 18 22 34 44 40 36 28 20 18 16 14 13 9.5 32 28 24 19 16 12 10 10 9 7 Electrical Inductance Range: .47µH to 10µH Additional values available Tolerance: 20% over entire range, Available in tighter tolerances Test Frequency: 100KHz, 1V Operating Temp: -55ºC ~ +125ºC Irms: Current at which ∆ T=40ºC temp rise with out core loss. Isat: Current at which Inductance drop is approximately 20%. All specifications subject to change without notice. Schematic Resistance to Soldering Heat Pre-Heat 150ºC, 1 minute. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC ± 5ºC Immersion Time: 10 sec. ± 1 sec. Test Equipment (L): HP4284A LCR meter or equivalent DCR: CH16502, Agilent 33420A Mirco-Ohm meter IDC: 3260B WK & DC Bias 3265B WK Physical Packaging: 600 pieces per 13 inch reel. Marking: EIA Inductance Code 714-665-1140 ALLIED COMPONENTS INTERNATIONAL R EVISED 7/16/09 15 www.alliedcomponents.com