PCHC127H-1R0M-RC

RoHS Power Choke High Current Inches (mm) PCHC127H Dimensions: Allied Part Number Inductance (µh) Tolerance (%) Test Freq. KHz,1v DCR (Ω) Max Isat (A) Irms (A) Max. Features • • • • • Magnetically shielded construction High saturation current up to 65A Expanded operating temp range Low DC Resistance Suitable for pick and place Electrical Inductance Range: .47µH to 10µH Additional values available Tolerance: 20% over entire range, Available in tighter tolerances Test Frequency: 100KHz, 1.0Vdc Operating Temp: -55ºC ~ +125ºC Storage Temp: -55ºC ~ +125ºC Temp Rise: ∆ T=40ºC Typical at rated Irms without core loss. Part temperature should not exceed 125ºC including temperature rise. Inductance Drop: 20% typical at rated Isat Resistance to Soldering Heat Pre-Heat 150ºC, 1 minute. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC ± 5ºC Immersion Time: 10 sec. ± 1 sec. Test Equipment (L): HP4284A LCR meter or equivalent (DCR): CH16502, Agilent 33420A Mico-Ohm Meter IDC: 3260B WK & DC Bias 3265BWK Physical Packaging: 500 pieces per 13 inch reel. Marking: EIA Inductance Code PCHC127H-R47M-RC PCHC127H-R68M-RC PCHC127H-1R0M-RC PCHC127H-1R5M-RC PCHC127H-2R2M-RC PCHC127H-3R3M-RC PCHC127H-4R7M-RC PCHC127H-6R8M-RC PCHC127H-100M-RC 0.47 0.68 1.00 1.50 2.20 3.30 4.70 6.80 10 20 20 20 20 20 20 20 20 20 100 100 100 100 100 100 100 100 100 1.2 1.6 2.1 2.6 4.2 6.8 11.2 14 16.8 65 60 50 48 40 35 30 21 16 41 35 32 27 22 18 15 12 10 All specifications subject to change without notice. Schematic 714-665-1140 ALLIED COMPONENTS INTERNATIONAL R EVISED 7/7/09 15 www.alliedcomponents.com