PCHC63H-8R2M-RC

RoHS Power Choke High Current Inches (mm) PCHC63H Dimensions: Allied Part Number Inductance (µh) Tolerance (%) Test Freq. KHz,1v DCR (mΩ) Max Isat (A) Irms (A) Max. Features • • • • • Magnetically shielded construction High saturation current up to 30A Expanding operating temp range Low DCR resistance Suitable for pick and place Electrical Inductance Range: .33µH to 10µH Available in tighter tolerances Tolerance: 20% over entire range, Test Frequency: 100KHz, 1.0Vdc Operating Temp: -55ºC ~ +125ºC Storage Temp: -55ºC ~ +125ºC Temp rise: ∆ T=40ºC Typical at rated Irms with out core loss. Part temperature should not exceed 125ºC including temperature rise. Inductance drop: 20% typical at rated Isat Resistance to Soldering Heat PCHC63H-R33M-RC PCHC63H-R47M-RC PCHC63H-R68M-RC PCHC63H-1R0M-RC PCHC63H-1R5M-RC PCHC63H-2R2M-RC PCHC63H-3R3M-RC PCHC63H-4R7M-RC PCHC63H-6R8M-RC PCHC63H-8R2M-RC PCHC63H-100M-RC 0.33 0.47 0.68 1.00 1.50 2.20 3.30 4.70 6.80 8.20 10 20 20 20 20 20 20 20 20 20 20 20 100 100 100 100 100 100 100 100 100 100 100 3.9 4.2 5.5 10 15 20 30 40 60 68 105 30 26 23 16 14 12 10 6.5 6 5.5 4.5 20 17.5 15.5 11 9 8 6 5.5 4.5 4 3 All specifications subject to change without notice. Schematic Pre-Heat 150ºC, 1 minute. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC ± 5ºC Immersion Time: 10 sec. ± 1 sec. Test Equipment (L): HP 4284A LCR meter or equivalent (DCR): CH16502, Agilent 33420A Micro-Ohm meter (IDC): 3260B WK & DC Bias 3265B WK Physical Packaging: 1000 pieces per 13 inch reel. Marking: EIA Inductance Code 714-665-1140 ALLIED COMPONENTS INTERNATIONAL R EVISED 7/26/10 15 www.alliedcomponents.com