PCHC63R8-1R0M-RC

RoHS SMD High Current Shielded Choke PCHC63R8 Dimensions: .287 Max (7.3 Max) .063+/-0.2 (1.6+/-0.5) Inches (mm) .260+/-.008 (6.6+/-0.2) .094 Typ (2.4 Typ) .118 Max (3.0 Max) Allied Part Number Inductance (µh) Idc=0A Tolerance (%) H e a t R a ted Current DC (A) Typ. Isat Current DC (A) Typ. RDC (mΩ) Typ. RDC (mΩ) Max. Features • • • • • • Magnetically shielded construction High saturation current up to 45Amps Expanding operating temp range Low DCR resistance Suitable for pick and place Similar to Vishay IHLP-2525CZ series Electrical Inductance Range: .10µH to 6.8µH Additional values available Tolerance: 20% over entire range, Available in tighter tolerances Test Frequency: 100KHz, .5Vdc Operating Temp: -55ºC ~ +125ºC Storage Temp: -55ºC ~ +125ºC Temp rise: ∆ T=40ºC Typical at heat rated current. Under no condition should the temperature of the part exceed 125ºC Inductance drop: 30% typical at rated Isat Resistance to Soldering Heat Pre-Heat 150ºC, 1 minute. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC ± 5ºC Immersion Time: 10 sec. ± 1 sec. Test Equipment (L): HP 4284A LCR meter or equivalent (DCR): CH16502, Agilent 33420A Micro-Ohm meter (IDC): 3260B WK & DC Bias 3265B WK PCHC63R8-R10M-RC PCHC63R8-R22M-RC PCHC63R8-R33M-RC PCHC63R8-R47M-RC PCHC63R8-R68M-RC PCHC63R8-R82M-RC PCHC63R8-1R0M-RC PCHC63R8-1R5M-RC PCHC63R8-2R2M-RC PCHC63R8-3R3M-RC PCHC63R8-4R7M-RC PCHC63R8-6R8M-RC 0.10 0.22 0.33 0.47 0.68 0.82 1.0 1.5 2.2 3.3 4.7 6.8 20 20 20 20 20 20 20 20 20 20 20 20 37 23 20 16.5 15 13 12 9.5 8.5 6 5.5 4.5 45 40 33 27 24 23 22 18 14 12 9 8 0.9 2.5 4.0 5.0 5.7 7.5 9.0 13.5 17 32 35 54 1.0 2.8 4.2 5.5 6.3 8.0 10.0 15 20 35 40 60 All specifications subject to change without notice. Physical Packaging: 1000 pieces per 13 inch reel. Marking: EIA Inductance Code 714-665-1140 ALLIED COMPONENTS INTERNATIONAL R EVISED 01/12/11 15 www.alliedcomponents.com