PCHC64P-3R3M-RC

RoHS Power Choke High Current Inches (mm) PCHC64P Dimensions: Allied Part Number Inductance (µh) Tolerance (%) Test Freq. KHz,1v DCR (Ω) Max Isat (A) Irms (A) Max. Features • • • • • Magnetically shielded construction High saturation current up to 32A Expanding operating temp range Low DCR resistance Suitable for pick and place Electrical Inductance Range: .33µH to 10µH Additional values available Tolerance: 20% over entire range, Available in tighter tolerances Test Frequency: 100KHz, 1.0Vdc Operating Temp: -55ºC ~ +125ºC Storage Temp: -55ºC ~ +125ºC Temp rise: ∆ T=40ºC Typical at rated Irms with out core loss. Part temperature should not exceed 125ºC including temperature rise. Inductance drop: 20% typical at rated Isat Resistance to Soldering Heat Pre-Heat 150ºC, 1 minute. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC ± 5ºC Immersion Time: 10 sec. ± 1 sec. Test Equipment (L): HP 4284A LCR meter or equivalent (DCR): CH16502, Agilent 33420A Micro-Ohm meter (IDC): 3260B WK & DC Bias 3265B WK PCHC64P-R33M-RC PCHC64P-R47M-RC PCHC64P-R68M-RC PCHC64P-1R0M-RC PCHC64P-1R5M-RC PCHC64P-2R2M-RC PCHC64P-3R3M-RC PCHC64P-4R7M-RC PCHC64P-6R8M-RC PCHC64P-100M-RC 0.33 0.47 0.68 1.00 1.50 2.20 3.30 4.70 6.80 10 20 20 20 20 20 20 20 20 20 20 100 100 100 100 100 100 100 100 100 100 1.4 2.5 3.8 5.8 8.4 15 18 21 30 60 32 30 28 20 18 14 13 9 7 5 25 20 17 15 16 12 10 7 5.5 4.5 All specifications subject to change without notice. Schematic Physical Packaging: 1000 pieces per 13 inch reel. Marking: EIA Inductance Code 714-665-1140 ALLIED COMPONENTS INTERNATIONAL R EVISED 7/16/09 15 www.alliedcomponents.com