PCI50-221M-RC

RoHS Power Chip Inductors Dimensions: Inches (mm) 0.510 Max (12.95) 0.300 (7.62) 0.450 Max (11.43) PCI50 1st 0.370 (9.40) Max 0.100 (2.54) 2nd 3rd 0.110 (2.79) D 0.100 (2.54) * Notice of marking change see “Marking” below. 0.118 (3.00) 0.290 (7.37) Allied Part Number Inductance (µh) Tolerance (%) SRF (MHz) TYP. DCR Max. ( Ω) I sat (A ) I rms (A ) Features • High current capacity in a small foot print • High energy storage and low DCR • Designed with high heat resistant materials for reflow operation • Wrap around terminals for excellent PCI50-4R7M-RC PCI50-100M-RC PCI50-150M-RC PCI50-220M-RC 4.7 10 15 22 20 20 20 20 25 22 18 11 .033 .033 .042 .054 8.0 8.0 7.0 3.5 3.5 3.0 2.5 5.5 solder quality and inspection • Flat top for pick and place assembly • Non-standard values available Electrical Inductance Range: 4.7µ h to 1000µh. PCI50-330M-RC 33 20 9.0 0.08 4.0 2.0 PCI50-470M-RC 47 20 8.0 0.10 3.8 1.6 PCI50-680M-RC 68 20 7.0 0.17 3.0 1.2 Tolerance: ± 20% over the entire inductance range. PCI50-101M-RC 100 20 5.0 0.22 2.5 1.2 Test Frequency: Inductance measured at 100KHz, 0.1 Vrms. After soldering, push PCI50-151M-RC 150 20 4.0 0.34 2.0 0.9 Operating Temp. Range: i-40° to +85° C.ll Inductance Drop: 20% typical at the PCI50-221M-RC 220 20 3.5 0.44 1.6 0.7 rated Isat.0 to 2000) x 10 -6° C. Temperature Rise: ∆T=40ºC rise typical at Irms. Physical Marking: Notice: We will be changing our marking PCI50-331M-RC 330 20 2.5 0.70 1.2 0.6 PCI50-471M-RC 470 20 2.0 0.95 1.0 0.3 PCI50-681M-RC 680 20 2.0 1.20 1.0 0.2 system to the 4 character EIA code for inductance and tolerance. For example: “101K” for 100µh 10%. PCI50-102M-RC 1000 20 1.5 2.00 0.8 0.1 Packaging: 225 pieces per 13 inch reel. All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 7/23/09 www.alliedcomponents.com