PCS3D12-150T-RC

RoHS Power Chip Shielded Inductors Dimensions: Inches (mm) PCS3D12 Allied Part Number Inductance (µh) Tolerance (%) Test Freq. KHz, 0.1V DCR Max. (Ω) Rated Current (A) Features • Shielded SMD Power Inductor • Available in magnetically shielded • Low DC resistance • Ideal for DC-DC converter applications Electrical Inductance Range: 1.0µh ~ 39µh Tolerance: 30% over entire range Operating Temp: -30ºC ~ 100ºC Rated Current: Current at which Inductance drops by 30% of initial value or ∆ T=40ºC lower, which ever is lower. PCS3D12-1R0T-RC PCS3D12-1R5T-RC PCS3D12-2R2T-RC PCS3D12-3R3T-RC PCS3D12-4R7T-RC PCS3D12-5R6T-RC PCS3D12-6R8T-RC PCS3D12-8R2T-RC PCS3D12-100T-RC PCS3D12-120T-RC PCS3D12-150T-RC PCS3D12-180T-RC PCS3D12-220T-RC PCS3D12-270T-RC PCS3D12-330T-RC PCS3D12-390T-RC 1.0 1.5 2.2 3.3 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 .040 .064 .084 .122 .172 .191 .218 .255 .408 .462 .502 .573 .801 1.207 1.358 1.911 1.54 1.32 1.12 0.90 0.72 0.66 0.60 0.57 0.49 0.47 0.41 0.37 0.34 Resistance to Soldering Heat Pre-Heat 150ºC, 1 Min. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC +/- 5ºC for 10 sec ± 1 sec. Test Equipment 0.30 0.28 0.23 (L): HP 4192A LF Impedance Analyzer (RDC): Chen Hwa 502 (Rate Current): Chen Hwa 1061 + Chen Hwa 301A or HP4284A + HP42841A All specifications subject to change wtihout notice. Physical Packaging: 1500 pieces per 7 inch reel. Marking: EIA Inductance Code. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 12/19/08 15 www.alliedcomponents.com