PCSDW125-680M-RC

RoHS SMD COMMON MODE POWER INDUCTORS PCSDW125 Dimensions: Inches (mm) Features Allied Part Number Inductance (µh) Tolerance (%) Test Freq. KHz, 0.25V DCR (Ω) Rated Current (A) • Small SMD common mode choke • Suitable for reflow soldering • Low DCR • Suitable for pick and place PCSDW125-3R3M-RC PCSDW125-220M-RC PCSDW125-680M-RC PCSDW125-821M-RC 3.3 22 68 81 20 20 20 20 100 100 100 100 0.0076 0.1020 0.2800 0.7700 12.700 4.710 2.620 1.490 Electrical Inductance Range: 3.3µh to 820µh Tolerance: 20% over entire inductance range Available in tighter tolerances Operating Temp: -55ºC ~ +125ºC Rated Current: Current at which the inductance drops 35% of initial value or ∆ T=40ºC whichever is lower Land Pattern Resistance to Soldering Heat Pre-Heat 150ºC, 1 Min. Solder Temp: 260ºC +/- 5ºC Immersion time: 10 sec. +/- 1 sec. Schematic Test Equipment (L): HP 4284A LCR meter or equivalent (DCR): HP 4338B Millohm meter or equivalent (Rated Current): 3260N WK LCR Meter & DC Bias 3265B WK Physical Packaging: 500 pieces per 13 inch reel. Marking: EIA Inductance Code. All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL 05/10/10 15 www.alliedcomponents.com