PCSDW74-6R8M-RC

RoHS SMD COMMON MODE POWER INDUCTORS Dimensions: Inches (mm) PCSDW74 Allied Part Number Inductance (µh) Tolerance (%) Test Freq. KHz, 0.25V DCR (Ω) Rated Current (A) Features • Small SMD common mode choke • Suitable for reflow soldering • Low DCR • Suitable for pick and place PCSDW74-6R8M-RC PCSDW74-100M-RC PCSDW74-151M-RC 6.8 10 150 20 20 20 100 100 100 0.0418 0.1200 0.7100 3.670 3.000 0.810 Electrical Inductance Range: 6.8µh to 150µh Tolerance: 20% over entire inductance range Available in tighter tolerances Operating Temp: -55ºC ~ +125ºC Rated Current: Current at which the inductance drops 35% of initial value or ∆ T=40ºC whichever is lower Land Pattern Resistance to Soldering Heat Pre-Heat 150ºC, 1 Min. Solder Temp: 260ºC +/- 5ºC Immersion time: 10 sec. +/- 1 sec. Schematic Test Equipment (L): HP 4284A LCR meter or equivalent (DCR): HP 4338B Millohm meter or equivalent (Rated Current): 3260N WK LCR Meter & DC Bias 3265B WK Physical Packaging: 1000 pieces per 13 inch reel. Marking: EIA Inductance Code. All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL 05/10/10 15 www.alliedcomponents.com