PCSLF1045-330M-RC

RoHS PCSLF1045 Power Chip Shielded Inductors Dimensions: Inches (mm) Features • Shielded Power Inductor • Designed ferrite cover provides magnetic shielding • Provides extremely low DCR and Hi rating current Electrical Allied Part Number Inductance (uH) Tolerance (%) Test Freq. KHz,0.5V RDC (Ω )±20% IDC (A) Itemp (A) Max. PCSLF1045-100M-RC PCSLF1045-150M-RC PCSLF1045-220M-RC 10 15 22 33 47 20 20 20 20 20 1 1 1 1 1 .0364 .0472 .0591 .0815 0.10 3.0 2.4 2.1 1.6 1.4 2.5 2.2 1.9 1.7 1.5 Inductance Range: 10µH to 1500µH Tolerance: 20% over entire range Itemp current: Value obtained when current flows and the temperature has risen 30ºC Operating Temp: -40ºC ~ +85ºC IDC: Current at which inductance drops by 10% of intial value Itemp: Current at which the temperature has risen 30ºC from initial Temp. PCSLF1045-330M-RC PCSLF1045-470M-RC PCSLF1045-680M-RC PCSLF1045-101M-RC 68 100 150 20 20 20 1 1 1 0.14 0.20 0.35 1.2 1.0 .79 1.3 1.1 .81 Resistance to Soldering Heat Pre-Heat 150ºC, 1 minute. Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC ± 5ºC for 10 sec. ± 1 sec. Test Equipment (L): HP 4192A (RDC): Chen Hwa 502BC (IDC): HP4284A + HP42841A / Chen Hwa 1061 + 301A Physical PCSLF1045-151M-RC PCSLF1045-221M-RC PCSLF1045-271M-RC PCSLF1045-331M-RC PCSLF1045-471M-RC PCSLF1045-681M-RC PCSLF1045-102M-RC 220 270 330 470 680 1000 1500 20 20 20 20 20 20 20 1 1 1 1 1 1 1 0.47 0.58 0.68 1.03 1.60 2.80 3.40 .65 .58 .54 .47 .38 .32 .22 .70 .60 .58 .47 .38 .29 .26 Packaging: 500 pieces per 13 inch reel. Marking: EIA Inductance Code PCSLF1045-152M-RC All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL R EVISED 7/20/09 15 www.alliedcomponents.com