RDC20-3R3M-RC

RoHS Radial Drum Core Inductors Dimensions: Inches (mm) RDC20 0.825 MAX. (20.96) 0.84 MAX. (21.34) 0.50 MAX. (12.70) 0.825 MAX. (20.96) D See table Allied Part Number Inductance (µh) Tolerance DCR Max. Ω Saturation Current (A) DC IDC (A) Dimension (D) RDC20-1R0T-RC RDC20-1R2M-RC RDC20-1R5M-RC RDC20-1R8M-RC RDC20-2R2M-RC RDC20-2R7M-RC RDC20-3R3M-RC RDC20-3R9M-RC RDC20-4R7M-RC RDC20-5R6M-RC RDC20-6R8M-RC RDC20-8R2M-RC RDC20-100M-RC RDC20-120K-RC RDC20-150K-RC RDC20-180K-RC RDC20-220K-RC RDC20-270K-RC RDC20-330K-RC RDC20-390K-RC RDC20-470K-RC RDC20-560K-RC RDC20-680K-RC RDC20-820K-RC RDC20-101K-RC RDC20-121K-RC RDC20-151K-RC RDC20-181K-RC RDC20-221K-RC RDC20-271K-RC RDC20-331K-RC RDC20-391K-RC RDC20-471K-RC RDC20-561K-RC RDC20-681K-RC RDC20-821K-RC RDC20-102K-RC RDC20-122K-RC RDC20-152K-RC RDC20-182K-RC RDC20-222K-RC 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 30 20 20 20 20 20 20 20 20 20 20 20 20 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 .003 .003 .003 .003 .004 .005 .005 .005 .005 .006 .007 .007 .009 .009 .013 .018 .019 .026 .029 .030 .035 .039 .053 .060 .080 .090 .098 .110 .150 .213 .305 .320 .355 .388 .430 .590 .818 1.140 1.260 1.390 1.540 108.0 108.0 83.0 68.0 68.0 58.0 58.0 50.0 50.0 44.0 39.0 36.0 30.0 27.0 25.0 22.0 21.0 20.5 18.6 17.0 15.1 13.6 12.7 11.3 10.4 9.4 8.6 7.8 7.0 6.3 5.2 4.9 4.5 4.1 3.7 3.4 3.1 2.7 2.4 2.2 2.0 11.4 11.4 11.4 11.4 11.4 11.4 11.4 11.4 11.4 11.4 11.4 11.4 11.4 11.4 . .00 9 7.20 7.20 5.50 5.50 5.50 5.50 5.50 4.80 4.80 4.00 4.00 4.00 4.00 2.80 2.00 1.60 1.60 1.60 1.60 1.60 1.30 1.00 0.80 0.80 0.80 0.80 .620 .620 .620 .620 .620 .620 .620 .620 .620 .620 .620 .620 .620 .620 .625 .630 .630 .546 .546 .594 .625 .625 .656 .656 .593 .593 .593 .671 .593 .652 .590 .590 .590 .590 .590 .590 .590 .590 .590 .590 .590 Features • Radial Leads for direct Printed Circuit Board mounting. • Pre-tinned leads. • Inductance range from 1.0µh to 2200µh. Also available in non-standard inductance values. • Current rating range from 2 to 108 amps DC. • Ideal for use in switching power supplies, filter networks and power amplifiers. Electrical Inductance: measured at 1KHz, 1V. Saturation Current: Lowers inductance by 10%. Temperature rise: ∆T=50ºC rise typical Reflow soldering - Max 230° C for 6 sec. at IDC. max. .Mechanical Leads are tinned to within 1/16 in. of body. Coils are finished with UL-VW-1 rated sleeving. Physical Packaging: 25 pieces per bag. All specifications subject to change without notice. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL www.alliedcomponents.com