SCM05-670M-RC

RoHS SCM05 0.0394±0.008 (1.0±0.2) USB 3.0 Common Mode Choke Dimensions: 0.013 (0.33) 0.0394 (1.0) Inches (mm) 0.0492±.008 (1.25±0.2) 0.023 0.069 (0.59) (1.75) 0.0126 (0.32) 0.035±0.008 (0.9±0.2) 0.0142 (0.36) Features • Minature SMD common mode filter • Excellent noise attenuation in a small 0402 package • Suitable for automated assembly • Excellent solderability Electrical Impedance range: 67Ω to 120Ω Tolerance: 20% over entire range Test Frequency: 100Mhz Operating Temp: -25ºC ~ 85ºC IDC: Inductance drop 10% Typ. from original value with no current DCR: Single Wire Test Value Resistance to Solder Heat Pre-Heat 150ºC, 1 minute Solder Composition: Sn/Ag3.0/Cu0.5 Solder Temp: 260ºC peak for 10 sec. Test time: 6 minutes Allied Part Number Impedance Z (Ω) Tolerance (%) Test Freq. (MHz) Rated Voltage (Vdc) Insulation Resistance (MΩ)min DCR Max. (Ω) IDC Max. (mA) SCM05-600M-RC SCM05-670M-RC SCM05-900M-RC SCM05-121M-RC SCM05-161M-RC 60 67 90 120 160 20 20 20 20 20 100 100 100 100 100 20 50 50 50 50 10 10 10 10 10 0.40 0.25 0.30 0.40 0.43 300 300 250 200 160 All specifications subject to change without notice. Impedance vs. Frequency Graph Test Equipment Impedance: HP4286A / HP4287A / Agilent E4991A (DCR): Chen Hwa 502BC Insulation Resistance: HP4339B (IDC): HP4284A with HP42841A / HP4285A with HP42841A Physical Packaging: 2000 pieces per 7 inch reel Marking: None SCHEMATIC NO POLARITY EQUIVALENT CIRCUIT 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 03/03/11 www.alliedcomponents.com