TC210-101L-RC

RoHS Toroidal Chokes TC210 Dimensions: Inches (mm) 0.45 MAX (11.43) 0.86 MAX (21.84) Tin lead to coil 0.50 (12.70) C A B Vertical Mount Horizontal Mount Allied Part Number Inductance Tolerance (µH) (%) @ 1KHZ L(µH) @ I rated IDC (A) DCR (Ω) MAX DIM DIM DIM B C A (Nom) (Nom) (Nom) Features • • • • • • Low Magnetic Radiation Low Core Loss High current capacity up to 10A Available in Horizontal or Vertical configuration Optional Tape Cover Cross to Miller / Bourns 2100 Electrical Inductance Range: 10µh to 1000µh Additional values available Tolerance: 15% over entire range Test Frequency: 1KHz Operating Temp: -55ºC ~ +105ºC Temp Rise: ∆ T=30ºC Typical at rated IDC Part temperature should not exceed 125ºC including temperature rise. ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( ( )TC210-100L-RC )TC210-120L-RC )TC210-150L-RC )TC210-180L-RC )TC210-220L-RC )TC210-270L-RC )TC210-330L-RC )TC210-390L-RC )TC210-470L-RC )TC210-560L-RC )TC210-680L-RC )TC210-101L-RC )TC210-121L-RC )TC210-151L-RC )TC210-181L-RC )TC210-221L-RC )TC210-271L-RC )TC210-331L-RC )TC210-391L-RC )TC210-471L-RC )TC210-561L-RC )TC210-681L-RC )TC210-821L-RC )TC210-102L-RC 10 12 15 18 22 27 33 39 47 56 68 100 121 150 180 220 270 330 390 470 560 680 820 1000 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 6.3 7.4 10.2 11.9 14.2 19.1 22.8 26.4 34.7 40.6 48.3 75.2 88.5 84.3 113.1 134.4 181.6 216.3 250.1 293.8 341.5 403.2 472.8 559.2 10.8 10.3 7.7 7.4 7.0 5.3 5.0 4.8 3.6 3.4 3.3 2.4 2.2 3.4 2.6 2.4 1.8 1.7 1.7 1.6 1.5 1.4 1.4 1.3 .006 .007 .012 .013 .015 .026 .029 .032 .055 .060 .067 .130 .150 .062 .110 .120 .210 .230 .250 .280 .300 .330 .370 .400 .34 .34 .33 .33 .33 .32 .32 .32 .31 .31 .31 .31 .31 .35 .34 .34 .33 .33 .33 .35 .35 .35 .35 .37 .77 .77 .76 .76 .76 .75 .75 .75 .75 .75 .75 .74 .74 .79 .77 .77 .76 .76 .76 .76 .79 .79 .79 .81 .053 .053 .042 .042 .042 .034 .034 .034 .027 .027 .027 .022 .022 .034 .027 .027 .022 .022 .022 .022 .022 .022 .022 .022 Test Equipment (L): 100 LCR meter or equivalent DCR: Chen Hwa 502 Please specify Vertical or Horizontal Mount by placing a V or H at the beginning of the part number, i.e. VTC210-100L (Vertical Mount). All specifications subject to change without notice. Physical Packaging: Bulk Marking: None 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 6/25/10 www.alliedcomponents.com