AT006N3-10

GaAs 30 dB IC Voltage Variable Dual Control Attenuator DC–6 GHz AT006N3-01, AT006N3-10 Features I Dual Control Voltages I Low Insertion Loss I 7 Lead Hermetic Package I Capable of Meeting MIL-STD Requirements5 -01 0.220 (5.59 mm) 0.210 (5.33 mm) 0.063 (1.60 mm) TYP. 0.130 (3.30 mm) TYP. 0.130 (3.30 mm) TYP. 0.268 (6.81 mm) 0.252 (6.40 mm) 0.45 (1.14 mm) TYP. 0.160 (4.06 mm) 0.120 (3.05 mm) 0.031 (0.79 mm) MAX. 0.013 (0.33 mm) 0.007 (0.18 mm) 0.007 (0.18 mm) 0.003 (0.08 mm) 0.065 (1.65 mm) MAX. Description The AT006N3-01 is a GaAs IC FET non-reflective bridged “T” attenuator that provides over 30 dB of “matched” attenuation. This device has two independent bias controls which can be adjusted to obtain the desired attenuation under matched conditions. The AT006N3-10 is the gullwing version of this device for surface mount applications. Electrical Specifications at 25°C Parameter1 Insertion Loss2 Frequency4 DC–1.0 GHz DC–2.0 GHz DC–4.0 GHz DC–6.0 GHz DC–1.0 GHz DC–2.0 GHz DC–4.0 GHz DC–6.0 GHz DC–2.0 GHz DC–4.0 GHz DC–6.0 GHz 30 29 26 25 Min. Typ. 0.8 1.0 1.2 1.5 35 33 30 28 1.25:1 1.40:1 1.50:1 1.3:1 1.5:1 1.6:1 Max. 1.0 1.2 1.4 1.7 Unit dB dB dB dB dB dB dB dB Attenuation Range VSWR (I/O) Operating Characteristics at 25°C Parameter Switching Characteristics Condition Rise, Fall (10/90% or 90/10% RF) On, Off (50% CTL to 90/10% RF) Video Feedthru3 For All Attenuation Levels VLow = 0 to -0.2 V @ 20 µA Max. VHigh = -5 V @ 50 µA Max. 0.5–6 GHz 0.05 GHz Frequency Min. Typ. 7 10 20 0 -3 Max. Unit ns ns mV dBm dBm Input Power for 1 dB Compression Control Voltages 1. All measurements made in a 50 Ω system, unless otherwise specified. 2. Insertion loss changes by 0.003 dB/°C. 3. Video feedthru measured with 1 ns risetime pulse and 500 MHz bandwidth. 4. DC = 300 kHz. 5. See Quality/Reliability section. Alpha Industries, Inc. [781] 935-5150 • Fax [617] 824-4579 • Email sales@alphaind.com • www.alphaind.com Specifications subject to change without notice. 9/99A 1 GaAs 30 dB IC Voltage Variable Dual Control Attenuator DC–6 GHz AT006N3-01, AT006N3-10 Typical Transfer Curve F = 1 GHz, VP1 = -3.5 V 0 50 40 30 20 10 0 DC V1 V2 Control Voltages (V) V1 (Series) -2.0 -3.0 V2 (Shunt) -4.0 -5.0 0 5 10 15 20 25 30 35 Attenuation (dB) -1.0 1 2 3 4 5 6 Relative Attenuation (dB) Frequency (GHz) Relative Attenuation vs. Control Voltages F = 50 MHz Attenuation (By State) vs. Frequency PIN at 1.0 dB Compression (dBm) 20 15 10 5 0 -5 0 5 10 15 20 25 30 Absolute Maximum Ratings Characteristic RF Input Power (RF In) Control Voltage (VC) Operating Temperature (TOP) Storage Temperature (TST) Thermal Resistance (ΘJC) Value 10 mW > 500 MHz 4 mW @ 50 MHz +0.2 V, -10 V -55°C to +125°C -65°C to +150°C 25°C/W -10 Attenuation (dB) 0.345 (8.76 mm) ± 0.010 (0.25 mm) 0.215 (5.46 mm) 0.080 (2.03 mm) TYP. 0.045 (1.14 mm) TYP. 0.063 (1.60 mm) TYP. 0.013 (0.33 mm) 0.007 (0.18 mm) 0.007 (0.18 mm) 0.003 (0.08 mm) 0.060 (1.52 mm) TYP. 0.385 (9.78 mm) ± 0.010 (0.25 mm) Attenuation vs. 1.0 dB Compression Point Pin Out GND 0.268 (6.81 mm) 0.252 (6.40 mm) 0.130 (3.30 mm) TYP. 0.065 (1.65 mm) MAX. 0.029 (0.74 mm) TYP. J1 J2 0.030 (0.76 mm) 0.015 (0.038 mm) GND V1 V2 2 Alpha Industries, Inc. [781] 935-5150 • Fax [617] 824-4579 • Email sales@alphaind.com • www.alphaind.com Specifications subject to change without notice. 9/99A GND