SMP1302-075

Switch and Attenuator Plastic Packaged PIN Diodes SMP1302 Series Features s Low Distortion Design s Frequency Range from HF to > 2 GHz s Designed for Base Station and Handset Applications Description The SMP1302 series of plastic packaged, surface mountable, low capacitance (0.3 pF) silicon PIN diodes are designed for high volume switch and attenuator applications from 10 MHz to beyond 2 GHz. These diodes are designed for use in low distortion PI and TEE attenuators with low drive current (maximum resistance at 1 mA is 10 Ω) commonly used in TV distribution and cellular base station applications. The nominal 50 µm I region width combined with a maximum resistance of 3 Ω at 10 mA, make these diodes useful in large signal switch applications. Available as single and dual diodes in a selection of plastic packages including SOT-23, SOD-323, small footprint SC-79 and miniature SC-70. Available in a SOT-5 (SMP1302-027) package as a four diode array designed for insertion in the commonly used 4 diode PI attenuator circuit. Absolute Maximum Ratings Characteristic Reverse Voltage (VR) Power Dissipation @ 25°C Lead Temperature (PD) Storage Temperature (TST) Operating Temperature (TOP) ESD Human Body Model Value 200 V 250 mW -65°C to +150°C -65°C to +150°C Class 1C Single Marking: PF1 SOT-23 o SMP1302-001 LS = 1.5 nH Common Anode Marking: PF9 SOT-23 o SMP1302-003 LS = 1.5 nH SC-70 o SMP1302-073 LS = 1.4 nH Common Cathode Marking: PF3 SOT-23 o SMP1302-004 LS = 1.5 nH SC-70 o SMP1302-074 LS = 1.4 nH Series Pair Marking: PF2 SOT-23 o SMP1302-005 LS = 1.5 nH SC-70 o SMP1302-075 LS = 1.4 nH Single PI Marking: PFM Single SOD-323 o SMP1302-011 LS = 1.5 nH SOT-5 o SMP1302-027 SC-79 o SMP1302-079 LS = 0.7 nH o Available through distribution. Alpha Industries, Inc. [781] 935-5150 • Fax [617] 824-4579 • Email sales@alphaind.com • www.alphaind.com Specifications subject to change without notice. 1/01A 1 Switch and Attenuator Plastic Packaged PIN Diodes SMP1302 Series Electrical Specifications at 25°C Parameter Reverse Current (IR) Capacitance (CT) Resistance (RS) Resistance (RS) Resistance (RS) Forward Voltage (VF) Carrier Lifetime (TI ) I Region Width Condition VR = 200 V F = 1 MHz, V = 30 V F = 100 MHz, I = 1 mA F = 100 MHz, I = 10 mA F = 100 MHz, I = 100 mA IF = 10 mA IF = 10 mA 0.8 0.7 50 15 Typ. Max. 10 0.30 20 3.0 1.5 Unit µA pF Ω Ω Ω V µS µm Typical Performance Data 1000 100 Series Resistance (Ω) Forward Current (mA) 0.1 1 10 100 100 10 10 1 1 0.1 0.1 0.01 0.01 400 500 600 700 800 900 1000 Forward Current (mA) Forward Voltage (mV) Series Resistance vs. Current @ 100 MHz 0.8 0.7 300 250 DC Characteristic Capacitance (pF) Conductance (µS) 0.6 0.5 0.4 0.3 0.2 0.1 0 0 1 MHz 200 150 100 50 0V 10 V 100 MHz 1 GHz 40 V 0 1 2 5 10 20 50 100 0 500 1000 1500 2000 Reverse Voltage (V) Frequency (MHz) Capacitance vs. Reverse Voltage Conductance vs. Frequency and Reverse Voltage 2 Alpha Industries, Inc. [781] 935-5150 • Fax [617] 824-4579 • Email sales@alphaind.com • www.alphaind.com Specifications subject to change without notice. 1/01A Switch and Attenuator Plastic Packaged PIN Diodes SMP1302 Series Resistance vs. Temperature @ 100 MHz IF (mA) 0.02 0.10 0.30 1.00 10.00 20.00 100.00 R -55°C (Ω) -55.00 599.00 123.00 42.20 13.50 2.00 1.34 0.60 R -15°C (Ω) -15.00 653.00 135.00 46.60 15.00 2.30 1.50 0.74 R +25°C (Ω) 25.0 692.0 143.0 49.7 16.2 2.6 1.7 1.0 R +65°C (Ω) 65.0 715.0 154.0 54.3 17.9 2.9.0 2.0 1.1 R +100°C (Ω) 100.00 722.00 161.00 56.80 18.80 3.00 2.00 1.10 SOT-23 0.110 (2.80 mm) MIN. 0.120 (3.04 mm) MAX. 3 0.012 (0.30 mm) MIN. 0.020 (0.50 mm) MAX. 0.047 (1.20 mm) MIN. 0.055 (1.40 mm) MAX. 1 2 0.083 (2.10 mm) MIN. 0.104 (2.64 mm) MAX. 0.037 (0.95 mm) REF. 0.020 (0.51 mm) REF. 0.076 (1.92 mm) REF. 0.003 (0.080 mm) MIN. 0.008 (0.20 mm) MAX. 8˚ MAX. 0.035 (0.89 mm) MIN. 0.044 (1.12 mm) MAX. SC-70 0.022 (0.55 mm) REF. 0.071 (1.80 mm) MIN. 0.087 (2.20 mm) MAX. 0.010 (0.25 mm) MIN. 0.016 (0.40 mm) MAX. 0.071 (1.80 mm) MIN. 0.094 (2.40 mm) MAX. 0.0005 (0.01 mm) MIN. 0.004 (0.10 mm) MAX. 3 0.045 (1.15 mm) MIN. 0.053 (1.35 mm) MAX. SOD-323 0.090 (2.30 mm) MIN. 0.108 (2.74 mm) MAX. 0.010 (0.25 mm) MIN. 0.016 (0.40 mm) MAX. 0.063 (1.60 mm) MIN. 0.071 (1.80 mm) MAX. 1 0.014 (0.35 mm) REF. 2 0.026 (0.65 mm) REF. 0.045 (1.15 mm) MIN. 0.053 (1.35 mm) MAX. 1 0.051 (1.30 mm) REF. 0.004 (0.10 mm) MIN. 0.007 (0.18 mm) MAX. 0.031 (0.80 mm) MIN. 0.039 (1.00 mm) MAX. 2 CATHODE INDICATOR 0.008 (0.20 mm) NOM. 0.004 (0.10 mm) MIN. 0.012 (0.30 mm) MAX. 0.000 (0.00 mm) MIN. 0.004 (0.10 mm) MAX. 0.006 (0.15 mm) TYP. 0.050 (1.25 mm) MAX. 0.004 (0.10 mm) MAX. SC-79 CATHODE 0.006 (0.15 mm) MIN. INDICATOR 0.010 (0.25 mm) MIN. 0.014 (0.35 mm) MAX. 1 2 0.010 (0.25 mm) MIN. 0.028 (0.70 mm) MIN. 0.035 (0.90 mm) MAX. SOT-5 0.074 (1.90 mm) REF. 5 4 0.069 (1.75 mm) 0.052 (1.30 mm) 3 0.037 (0.95 mm) REF. 0.012 (0.30 mm) TYP. 0.024 (0.61 mm) 0.004 (0.10 mm) 0.060 (1.50 mm) MIN. 0.067 (1.70 mm) MAX. 0.043 (1.10 mm) MIN. 0.051 (1.30 mm) MAX. 0.020 (0.50 mm) MIN. 0.028 (0.70 mm) MAX. 10˚ MAX. 0.020 (0.51 mm) 0.014 (0.35 mm) 0.012 (0.30 mm) 0.000 (0.00 mm) MIN. 0.064 (1.63 mm) 0.035 (0.90 mm) 1 2 0.118 (3.00 mm) 0.087 (2.20 mm) 10˚ MAX. 0.003 (0.07 mm) MIN. 0.008 (0.20 mm) MAX. 0.122 (3.10 mm) 0.106 (2.70 mm) 0.0104 (0.26 mm) 0.0035 (0.09 mm) MIN. Alpha Industries, Inc. [781] 935-5150 • Fax [617] 824-4579 • Email sales@alphaind.com • www.alphaind.com Specifications subject to change without notice. 1/01A 3