SDDJE12200

2018/9/5 SDDJE Series - Basic information 10A 250V AC Qualified Type SDDJE Series Type Rocker Circuit arrangement SPST Travel 3.4mm Operating force 3±2N Mounting method Snap-in Terminal type Right angle Frame With Marking (knob) Without C-UL-US 10AGP 250V AC SEMKO 6A/96A 250V~, 10(6)/250~ VDE 6A/96A 250V~, 10(6)/250~ BS 6A/96A 250V~, 10(6)/250~ Ratings satisfying local electrical appliance and material safety law 125V 10A‡ Operating temperature range -10℃ to +55℃ Rating 10AGP 250V AC, 6A/96A 250V~ Electrical performance Mechanical performance Contact resistance 100mΩ max. Insulation resistance 500MΩ min. 500V DC Voltage proof 2,000V AC for 1 minute Terminal strength 50N for 1 minute (lead terminal) 5N for 1 minute (right-angle terminal) Actuator strength Durability Operating direction 25N Perpendicular direction 25N Operating life https://www.alps.com/prod/info/E/HTML/Switch/Power/SDDJE/SDDJE12200.html 10,000 cycles 10A 250V AC 1/4 2018/9/5 SDDJE Series - Basic information Environmental Cold -20℃ 96h Dry heat 85℃ 96h Damp heat 40℃, 90 to 95%RH 96h performance Minimum order unit (pcs.) Japan 250 Export 1,250 Dimensions Mounting Hole Dimensions Mounting Hole Reference Size https://www.alps.com/prod/info/E/HTML/Switch/Power/SDDJE/SDDJE12200.html 2/4 2018/9/5 SDDJE Series - Basic information Verify the performance under actual product conditions before use. Circuit Diagram Marking (knob) Packing Specifications Tray https://www.alps.com/prod/info/E/HTML/Switch/Power/SDDJE/SDDJE12200.html 3/4 2018/9/5 SDDJE Series - Basic information Number of packages 1 case / Japan (pcs.) 1 case / export 250 1,250 packing Export package measurements (mm) 411×328×379 Soldering Conditions Reference for Hand Soldering Soldering temperature 350±10℃ Soldering time 3+1/0s Notes are common to this series/models. 1. This site catalog shows only outline specifications. When using the products, please obtain formal specifications for supply. 2. The lead terminals are also used as tab terminals (#187). (Use a positive lock connector type.) 3. The lead terminal type can be mounted onto a board. (Manual soldering required.) 4. Standard products apply Grade V-2 material (Flame Class). For Grade V-0 type please contact us. 5. Please place purchase orders per minimum order unit (integer). 6. Products other than those listed in the above chart are also available. Please contact us for details. https://www.alps.com/prod/info/E/HTML/Switch/Power/SDDJE/SDDJE12200.html 4/4