SPEJ110100

2017/3/9 SPEJ Series - Basic information Compact Momentary Type SPEJ Series Part number SPEJ110100 Travel 1.7mm Operating force 3.5±0.7N Poles 2 Positions 2 Operating temperature range -40℃ to +85℃ Electrical performance Contact resistance (Initial performance/After lifetime) 150mΩ max./150mΩ max. Insulation resistance 100MΩ min. 500V DC Voltage proof 500V AC for 1 minute Mechanical performance Actuator strength Operating direction 49N Rating (max.)(Resistive load) 0.2A 14V DC Durability Operating life without load 10,000 cycles 150mΩ max. Operating life with load (at max. rated load) 10,000 cycles 150mΩ max. Cold -40℃ 500h Dry heat 85℃ 500h Damp heat 60℃, 90 to 95%RH 500h Environmental performance Minimum order unit (pcs.) Japan 500 Export 2,000 Dimensions http://www.alps.com/prod/info/E/HTML/Switch/Push/SPEJ/SPEJ110100.html 1/4 2017/3/9 SPEJ Series - Basic information Recommend Pattern Circuit Diagram http://www.alps.com/prod/info/E/HTML/Switch/Push/SPEJ/SPEJ110100.html 2/4 2017/3/9 SPEJ Series - Basic information Packing Specifications Taping Number of packages 1 reel (pcs.) 500 1 case / Japan 1,000 1 case / export packing 2,000 Tape width (mm) 24 Export package measurements (mm) 404×397×140 Soldering Conditions Example of Reflow Soldering Condition 1. Heating method Double heating method with infrared heater. 2. Temperature measurement Thermocouple 0.1 to 0.2 Φ CA (K) or CC (T) at soldering portion (copper foil surface). A heat resisting tape should be used for fixed measurement. 3. Temperature profile http://www.alps.com/prod/info/E/HTML/Switch/Push/SPEJ/SPEJ110100.html 3/4 2017/3/9 A(℃) SPEJ Series - Basic information B(℃) C(s) D(℃) E(℃) F(s) 230 40 180 150 120 3s max. 260 (1) The condition mentioned above is the temperature on the mounting surface of a PC board. There are cases where the PC board's temperature greatly differs from that of the switch, depending on the PC board's material, size, thickness, etc. The above-stated conditions shall also apply to switch surface temperatures. (2) Soldering conditions differ depending on reflow soldering machines. Prior verification of soldering condition is highly recommended. Reference for Hand Soldering Soldering temperature 350±5℃ Soldering time 4s max. http://www.alps.com/prod/info/E/HTML/Switch/Push/SPEJ/SPEJ110100.html 4/4