SPUN190900

2018/9/5 SPUN Series - Basic information 2.5mm-travel Large-sized Horizontal Type SPUN Series Changeover timing Non shorting Travel 2.5mm Total travel 3.5mm Rating Standard Operating force 2±1N Mounting method PC board Poles 2 Operation Momentary Terminal type Straight Operating temperature range -10℃ to +60℃ Rating (max.)/(min.) (Resistive load) 0.1A 30V DC/50µA 3V DC Electrical performance Contact resistance (Initial performance/After lifetime) 20mΩ max./40mΩ max. Insulation resistance 100MΩ min. 500V DC Voltage proof 500V AC for 1 minute Terminal strength 5N for 1 minute Mechanical performance Actuator strength Durability Environmental performance Operating direction 50N Pulling direction 50N Operating life without load 30,000 cycles 40mΩ max. Operating life with load (at max. rated load) 10,000 cycles 40mΩ max. Cold -20℃ 96h Dry heat 85℃ 96h Damp heat 40℃, 90 to 95%RH 96h https://www.alps.com/prod/info/E/HTML/Switch/Push/SPUN/SPUN190900.html 1/4 2018/9/5 SPUN Series - Basic information Minimum order unit (pcs.) Japan 250 Export 1,250 Dimensions Mounting Hole Dimensions Viewed from direction A in the dimensions. Actuator Configuration at Front Edge https://www.alps.com/prod/info/E/HTML/Switch/Push/SPUN/SPUN190900.html 2/4 2018/9/5 SPUN Series - Basic information Circuit Diagram Packing Specifications Bulk Number of packages 1 case / Japan (pcs.) 1 case / export packing Export package measurements (mm) 250 1,250 400×270×290 Soldering Conditions Reference for Dip Soldering Items Dip soldering Preheating temperature 100℃ max. Preheating time 60s max. Soldering temperature 260±5℃ Duration of immersion 10±1s Reference for Hand Soldering Soldering temperature 350±5℃ Soldering time 3+1/0s Products Line of Knob https://www.alps.com/prod/info/E/HTML/Switch/Push/SPUN/SPUN190900.html 3/4 2018/9/5 SPUN Series - Basic information We recommend the use of adhesive to secure the knob when mounting onto switches. Notes are common to this series/models. 1. This site catalog shows only outline specifications. When using the products, please obtain formal specifications for supply. 2. Please place purchase orders per minimum order unit (integer). 3. Products other than those listed in the above chart are also available. Please contact us for details. https://www.alps.com/prod/info/E/HTML/Switch/Push/SPUN/SPUN190900.html 4/4